SLUUCB0 August   2021

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Features
    2. 1.2 Description
  3. 2EVM Setup and Requirements
    1. 2.1 Commander Mode
    2. 2.2 Responder Mode
    3. 2.3 Pushbutton Wake
  4. 3Schematic and Bill of Materials

2.2 Responder Mode

To configure the board for responder mode, remove the shunt on J4 to disconnect the external 1-kΩ resistor and series diode from the LIN bus per the LIN specification.