SBOK068 November   2022 OPA4H199-SEP

 

  1.   OPA4H199-SEP Production Flow and Reliability Report
  2. 1Trademarks
  3. 2Texas Instruments Enhanced Product Qualification and Reliability Report
  4. 3Device Introduction
  5. 4OPA4H199-SEP Space Enhanced Plastic Production Flow
  6. 5Device Qualification
  7. 6Outgas Test Report

6 Outgas Test Report

Outgassing test was performed on 5 units. A total mass loss (TML) of 1.00% and collected volatile condensable material (CVCM) of 0.10% were used as screening levels for rejection of spacecraft materials. The outgas test was performed in a vacuum environment of less than 5 × 10 –5 torr according to ASTM E 595, for a duration of 24 hours, at 125°C. The TML, CVCM, and the amount of Water Vapor Recovered (WVR) were measured after the test.

Table 6-1 Outgas Test Results
SAMPLE TML
(%)		 CVCM
(%)		 WVR
(%)
OPA4H199MDYYTSEP 0.07 0.01 0.06