ZHCSUG1C September   1980  – January 2024

PRODUCTION DATA  

  1.   1
  2. 1 特性
  3. 2 应用
  4. 3 说明
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 Dissipation Rating Table
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Resistance Characteristics
    5. 5.5 Electrical Characteristics
    6. 5.6 Switching Characteristics
    7. 5.7 Typical Characteristics
  7. 6 Parameter Measurement Information
  8. 7 Detailed Description
    1. 7.1 Device Functional Modes
      1. 7.1.1 Schematics of Inputs and Outputs
  9. 8 Application and Implementation
    1. 8.1 Typical Application
  10. 9 Device and Documentation Support
    1. 9.1 支持资源
    2. 9.2 商标
    3. 9.3 静电放电警告
    4. 9.4 术语表
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • D|8
  • P|8
  • PS|8
散热焊盘机械数据 (封装 | 引脚)
订购信息

5.5 Electrical Characteristics

over recommended ranges of supply voltage, common-mode input voltage, and operating free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP(1) MAX UNIT
VIT + Positive-going input threshold voltage See (4) 0.2 V
0.4
VIT- Negative-going input threshold voltage See (4) -0.2 V
-0.4(2)
Vhys Hysteresis voltage (VIT+-VIT-) 70 mV
VOH High-level output voltage VID = 0.2V, IO = -1mA 2.5 1.5 V
VOL Low-level output voltage VID = -0.2V, IO = 20mA 0.35 0.5 V
II Input current VCC = 0 to 5.5V, VI = 10V 1.1 1.25 mA
See (5) VI = -10V -1.6 -1.25
IOS Short-circuit output current(3) VO = 0, VID = 0.2V -40 -75 -100 mA
ICC Supply current VID = -0.5V, No load 35 50 mA
(1) All typical values are at VCC = 5 V, TA = 25°C.
(2) The algebraic convention, in which the less positive (more negative) limit is designated as minimum, is used in this data sheet for threshold levels only.
(3) Only one output should be shorted at a time, and duration of the short circuit should not exceed one second.
(4) The expanded threshold parameter is tested with a 500-Ω resistor in series with each input.
(5) The input not under test is grounded.