SCDS247B October   2008  – February 2016 TS12A44513 , TS12A44514 , TS12A44515

PRODUCTION DATA.  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Pin Configuration and Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics for 5-V Supply
    6. 6.6 Electrical Characteristics for 12-V Supply
    7. 6.7 Electrical Characteristics for 3-V Supply
    8. 6.8 Typical Characteristics
  7. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
    4. 7.4 Device Functional Modes
  8. Application and Implementation
    1. 8.1 Application Information
      1. 8.1.1 Logic-Level Thresholds
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curve
  9. Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Related Links
    2. 11.2 Trademarks
    3. 11.3 Electrostatic Discharge Caution
    4. 11.4 Glossary
  12. 12Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

6 Specifications

6.1 Absolute Maximum Ratings(1)(2)(3)

MIN MAX UNIT
VCC Supply voltage –0.3 13 V
VNC
VNO
VCOM
Analog voltage(4) –0.3 VCC + 0.3 V
INC
INO
ICOM
IIN
Analog current -20 20 mA
Peak current (pulsed at 1 ms, 10% duty cycle) ±30 mA
TA Operating temperature –40 85 °C
PD Power dissipation Mounted on JEDEC 4-layer board (JESD 51-7), No airflow, TA = 25°C, TJ = 125°C PW package 0.88 W
Tstg Storage temperature –65 150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
(3) Voltages referenced to GND
(4) Voltages exceeding VCC or GND on any signal terminal are clamped by internal diodes. Limit forward-diode current to maximum current rating.

6.2 ESD Ratings

VALUE UNIT
V(ESD) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±2000 V
Charged-device model (CDM), per JEDEC specification JESD22-C101(2) ±500
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
VCC 2 12 V
VNC, VNO, VCOM, VIN 0 VCC V

6.4 Thermal Information

THERMAL METRIC(1) TS12A44513, TS12A44514, TS12A44515 UNIT
D PW
14 PINS 14 PINS
RθJA Junction-to-ambient thermal resistance 89.8 119.6 °C/W
RθJC(top) Junction-to-case (top) thermal resistance 49.6 48.4
RθJB Junction-to-board thermal resistance 44.4 61.3
ψJT Junction-to-top characterization parameter 13.8 5.7
ψJB Junction-to-board characterization parameter 44.1 60.7
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.

6.5 Electrical Characteristics for 5-V Supply(1)

VCC = 4.5 V to 5.5 V, VINH = 2.4 V, VINL = 0.8 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER TEST CONDITIONS TA MIN TYP(2) MAX UNIT
ANALOG SWITCH
VCOM, VNO, VNC Analog signal range 0 VCC V
Ron ON-state resistance VCC = 4.5 V, VCOM = 3.5 V,
ICOM = 1 mA
25°C 12 20 Ω
Full 30
Ron(flat) ON-state resistance
flatness
VCOM = 1 V, 2 V, 3 V,
ICOM = 1 mA
25°C 1 3 Ω
Full 4
ΔRon ON-state resistance
matching between channels(5)
VCC = 4.5 V, ICOM = 5 mA,
VNO or VNC = 3 V
25°C 3 Ω
TMIN to TMAX 4
INO(OFF),
INC(OFF)
NO, NC
OFF leakage current(3)
VCC = 5.5 V, VCOM = 1 V,
VNO or VNC = 4.5 V
25°C 1 nA
Full 10
ICOM(OFF) COM
OFF leakage current(3)
VCC = 5.5 V, VCOM = 1 V,
VNO or VNC = 4.5 V
25°C 1 nA
Full 10
ICOM(ON) COM
ON leakage current(3)
VCC = 5.5 V, VCOM = 4.5 V,
VNO or VNC = 4.5 V
25°C 1 nA
Full 10
DIGITAL CONTROL INPUT (IN)
VIH Input logic high Full 2.4 VCC V
VIL Input logic low Full 0 0.8 V
IIH, IIL Input leakage current VIN = VCC, 0 V Full 0.01 μA
DYNAMIC
tON Turn-on time see Figure 2 25°C 45 100 ns
Full 125
tOFF Turn-off time see Figure 2 25°C 35 50 ns
Full 70
QC Charge injection(4) CL = 1 nF, VNO = 0 V,
RS = 0 Ω, See Figure 1
25°C –1.5 pC
CNO(OFF),
CNC(OFF)
NO, NC
OFF capacitance
f = 1 MHz, See Figure 4 25°C 8 pF
CCOM(OFF) COM
OFF capacitance
f = 1 MHz, See Figure 4 25°C 8 pF
CCOM(ON) COM
ON capacitance
f = 1 MHz, See Figure 4 25°C 19 pF
CI Digital input capacitance VIN = VCC, 0 V 25°C 2 pF
BW Bandwidth RL = 50 Ω, CL = 15 pF,
VNO = 1 VRMS,
25°C 530 MHz
OISO OFF isolation RL = 50 Ω, CL = 15 pF,
VNO = 1 VRMS, f = 100 kHz
25°C –94 dB
THD Total harmonic distortion RL = 50 Ω, CL = 15 pF,
VNO = 1 VRMS, f = 100 kHz
25°C 0.09%
SUPPLY
ICC Supply Current VIN = VCC, 0 V 25°C 0.05 μA
Full 0.1
(1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
(2) Typical values are at TA = 25°C.
(3) Leakage parameters are 100% tested at maximum-rated hot operating temperature, and are ensured by correlation at 25°C.
(4) Specified by design, not production tested
(5) ΔRON = RON(MAX) – RON(MIN)

6.6 Electrical Characteristics for 12-V Supply(1)

VCC = 11.4 V to 12.6 V, VINH = 5 V, VINL = 0.8 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER TEST CONDITIONS TA MIN TYP(2) MAX UNIT
ANALOG SWITCH
VCOM, VNO, VNC Analog signal range 0 VCC V
Ron ON-state resistance VCC = 11.4 V, VCOM = 10 V,
ICOM = 1 mA
25°C 6.5 10 Ω
Full 15
Ron(flat) ON-state resistance
flatness
VCC = 11.4 V,
VCOM = 2 V, 5 V, 10 V,
ICOM = 1 mA
25°C 1.5 3 Ω
Full 4
ΔRon ON-state resistance
matching between channels(5)
VCC = 11.4 V, ICOM = 5 mA,
VNO or VNC = 10 V
25°C 2.5 Ω
TMIN to TMAX 3
INO(OFF),
INC(OFF)
NO, NC
OFF leakage current(3)
VCC = 12.6 V, VCOM = 1 V,
VNO or VNC = 10 V
25°C 1 nA
Full 10
ICOM(OFF) COM
OFF leakage current(3)
VCC = 12.6 V, VCOM = 1 V,
VNO or VNC = 10 V
25°C 1 nA
Full 10
ICOM(ON) COM
ON leakage current(3)
VCC = 12.6 V, VCOM = 10 V,
VNO or VNC = 10 V
25°C 1 nA
Full 10
DIGITAL CONTROL INPUT (IN)
VIH Input logic high Full 5 VCC V
VIL Input logic low Full 0 0.8 V
IIH, IIL Input leakage current VIN = VCC, 0 V Full 0.001 μA
DYNAMIC
tON Turn-on time See Figure 2 25°C 25 75 ns
Full 80
tOFF Turn-off time See Figure 2 25°C 20 45 ns
Full 50
QC Charge injection(4) CL = 1 nF, VNO = 0 V,
RS = 0 Ω, See Figure 1
25°C –10.5 pC
CNO(OFF),
CNC(OFF)
NO, NC
OFF capacitance
f = 1 MHz, See Figure 4 25°C 8 pF
CCOM(OFF) COM
OFF capacitance
f = 1 MHz, See Figure 4 25°C 8 pF
CCOM(ON) COM
ON capacitance
f = 1 MHz, See Figure 4 25°C 21.5 pF
CI Digital input capacitance VIN = VCC, 0 V 25°C 2 pF
BW Bandwidth RL = 50 Ω, CL = 15 pF,
VNO = 1 VRMS,
25°C 530 MHz
OISO OFF isolation RL = 50 Ω, CL = 15 pF,
VNO = 1 VRMS, f = 100 kHz
25°C –95 dB
THD Total harmonic distortion RL = 50 Ω, CL = 15 pF,
VNO = 1 VRMS, f = 100 kHz
25°C 0.07%
SUPPLY
ICC Supply Current VIN = VCC, 0 V 25°C 0.05 μA
Full 0.2
(1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
(2) Typical Values are at TA = 25°C.
(3) Leakage parameters are 100% tested at maximum-rated hot operating temperature, and are ensured by correlation at 25°C.
(4) Specified by design, not production tested
(5) ΔRON = RON(MAX) – RON(MIN)

6.7 Electrical Characteristics for 3-V Supply(1)

VCC = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER TEST CONDITIONS TA MIN TYP(2) MAX UNIT
ANALOG SWITCH
VCOM, VNO, VNC Analog signal range 0 VCC V
Ron ON-state resistance VCC = 3 V, VCOM = 1.5 V,
INO = 1 mA,
25°C 20 40 Ω
Full 50
Ron(flat) ON-state resistance
flatness
VCC = 3 V,
VCOM = 1 V, 1.5 V, 2 V,
ICOM = 1 mA
25 °C 1 3 Ω
Full 4
ΔRon ON-state resistance
matching between channels(5)
VCC = 2.7 V, ICOM = 5 mA,
VNO or VNC = 1.5 V
25°C 3.5 Ω
TMIN to TMAX 4.5
INO(OFF),
INC(OFF)
NO, NC
OFF leakage current(3)
VCC = 3.6 V, VCOM = 1 V,
VNO or VNC = 3 V
25°C 1 nA
Full 10
ICOM(OFF) COM
OFF leakage current(3)
VCC = 3.6 V, VCOM = 1 V,
VNO or VNC = 3 V
25°C 1 nA
Full 10
ICOM(ON) COM
ON leakage current(3)
VCC = 3.6 V, VCOM = 3 V,
VNO or VNC = 3 V
25°C 1 nA
Full 10
DIGITAL CONTROL INPUT (IN)
VIH Input logic high Full 2.4 VCC V
VIL Input logic low Full 0 0.8 V
IIH, IIL Input leakage current VIN = VCC, 0 V Full 0.01 μA
DYNAMIC
tON Turn-on time(4) See Figure 2 25°C 70 120 ns
Full 175
tOFF Turn-off time(4) See Figure 2 25°C 50 80 ns
Full 120
QC Charge injection(4) CL = 1 nF, See Figure 1 25°C –0.5 pC
CNO(OFF),
CNC(OFF)
NO, NC
OFF capacitance
f = 1 MHz, See Figure 4 25°C 8 pF
CCOM(OFF) COM
OFF capacitance
f = 1 MHz, See Figure 4 25°C 8 pF
CCOM(ON) COM
ON capacitance
f = 1 MHz, See Figure 4 25°C 17 pF
CI Digital input capacitance VIN = VCC, 0 V 25°C 2 pF
BW Bandwidth RL = 50 Ω, CL = 15 pF,
VNO = 1 VRMS, f = 100 kHz
25°C 510 MHz
OISO OFF isolation RL = 50 Ω, CL = 15 pF,
VNO = 1 VRMS, f = 100 kHz
25°C –94 dB
THD Total harmonic distortion RL = 50 Ω, CL = 15 pF,
VNO = 1 VRMS, f = 100 kHz
25°C 0.27%
SUPPLY
ICC Supply Current VIN = VCC, 0 V 25°C 0.05 μA
Full 0.2
(1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
(2) Typical values are at TA = 25°C.
(3) Leakage parameters are 100% tested at maximum-rated hot operating temperature, and are ensured by correlation at 25°C.
(4) Specified by design, not production tested
(5) ΔRON = RON(MAX) – RON(MIN)
TS12A44513 TS12A44514 TS12A44515 charge_cds247.gif Figure 1. Charge Injection
TS12A44513 TS12A44514 TS12A44515 switch_cds247.gif Figure 2. Switching Times
TS12A44513 TS12A44514 TS12A44515 off_cds247.gif Figure 3. Off Isolation and On Loss
TS12A44513 TS12A44514 TS12A44515 NO_cds247.gif Figure 4. NO, NC, and COM Capacitance

6.8 Typical Characteristics

TS12A44513 TS12A44514 TS12A44515 g_ron_vcom_ta25_cds247.gif Figure 5. RON vs VCOM (TA = 25°C)
TS12A44513 TS12A44514 TS12A44515 g_ron_vcom_45v_cds247.gif Figure 7. RON vs VCOM (VCC = 4.5 V)
TS12A44513 TS12A44514 TS12A44515 g_ron_vcom_3v_cds247.gif Figure 6. RON vs VCOM (VCC = 3 V)
TS12A44513 TS12A44514 TS12A44515 g_ron_vcom_114v_cds247.gif Figure 8. RON vs VCOM (VCC = 11.4 V)