ZHCSFD9B July   2016  – October 2018 TPS61230A

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用
  3. 3 说明
    1.     Device Images
      1.      典型应用
      2.      效率
  4. 4 修订历史记录
  5. 5 Pin Configuration and Functions
    1.     Pin Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Startup
      2. 7.3.2 Enable and Disable
      3. 7.3.3 Under-Voltage Lockout (UVLO)
      4. 7.3.4 Current Limit Operation
      5. 7.3.5 Over Voltage Protection
      6. 7.3.6 Load Disconnect
      7. 7.3.7 Thermal Shutdown
    4. 7.4 Device Functional Modes
      1. 7.4.1 PWM Mode
      2. 7.4.2 PFM Mode
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Applications
      1. 8.2.1 TPS61230A 2.5-V to 4.5-V Input, 5-V Output Converter
        1. 8.2.1.1 TPS61230A 5-V Output Design Requirements
        2. 8.2.1.2 TPS61230A 5-V Detailed Design Procedure
          1. 8.2.1.2.1 Programming The Output Voltage
          2. 8.2.1.2.2 Inductor and Capacitor Selection
            1. 8.2.1.2.2.1 Inductor Selection
            2. 8.2.1.2.2.2 Output Capacitor Selection
            3. 8.2.1.2.2.3 Input Capacitor Selection
          3. 8.2.1.2.3 Loop Stability, Feed Forward Capacitor
        3. 8.2.1.3 TPS61230A 5-V Output Application Performance Plots
      2. 8.2.2 Systems Example - TPS61230A with Feed Forward Capacitor for Best Transient Response
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
    3. 10.3 Thermal Considerations
  11. 11器件和文档支持
    1. 11.1 器件支持
      1. 11.1.1 第三方产品免责声明
    2. 11.2 文档支持
      1. 11.2.1 相关文档
    3. 11.3 接收文档更新通知
    4. 11.4 社区资源
    5. 11.5 商标
    6. 11.6 静电放电警告
    7. 11.7 术语表
  12. 12机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

5 Pin Configuration and Functions

RNS Package
7-Pin VQFN
Top View

Pin Functions

PIN I/O DESCRIPTION
NAME NUMBER
CBST 1 I Boot strap capacitor for the supply of high-side MOSFET driver. An external capacitor is required between the SW and CBST pins to provide supply voltage to the high-side MOSFET gate driver.
EN 2 I This is the enable pin of the device. Connecting this pin to ground ( < 0.4 V ) forces the device into shutdown mode. Pulling this pin to high ( > 1.2 V ) enables the device. This pin must be terminated but not floating.
FB 3 I Voltage feedback of adjustable output voltage. Connecting a resistor divider network from the output of the converter to the FB pin. Must be connected to VOUT on fixed output voltage version.
VIN 4 I Supply voltage for the internal circuitry.
SW 5 I/O Switching node of the boost regulator. It is connected to the drain of the internal low side power FET and the source of the internal high-side power FET.
GND 6 – Ground pin. Return for the internal voltage reference and analog circuits, also the source terminal of the low-side FET switch.
VOUT 7 O Boost converter output.