204 |
LED_ERR_MASK |
LOD-LSD failure or PWM error information mask bit
0b = Any LOD-LSD failure or PWM error pulls down the ERR pin
1b = LOD-LSD failure or PWM error is masked from affecting the ERR pin |
203 |
SLEW_RATE |
Turnon and turnoff speed configuration bit
0b = 200 ns rising and falling time.
1b = 100 ns rising and falling time. |
202 |
LOD_VOLATGE |
LED open-detection (LOD) threshold
0b = LOD threshold is 0.3 V
1b = LOD threshold is 0.5 V |
201 |
LSD_VOLTAGE |
LED short-detection (LSD) threshold
0b = LSD threshold is VSENSE – 0.3 V
1b = LSD threshold is VSENSE – 0.7 V |
200 |
APS_CURRENT |
Adjacent-pin short-detection sink current
0b = 20-µA APS current
1b = 40-µA APS current |
199 |
APS_TIME |
Adjacent-pin short-detection time
0b = 10 µs APS detection time
1b = 20 µs APS detection time |
198–197 |
GS_MODE |
Grayscale-counter mode selection.
00/01b = 12-bit mode
10 = 10-bit mode
11 = 8-bit mode |
196 |
TIMING_RESET |
Display-timing reset mode
0b = Disabled
1b = Enabled |
195 |
AUTO_REPEAT |
Auto-display repeat mode
0b = Disabled
1b = Enabled |
194 |
DC_RANGE_B |
Dot-correction adjustment range for the BLUE color output
0b = Lower range 0%–66.7%
1b = Higher range 33.3%–100% |
193 |
DC_RANGE_G |
Dot-correction adjustment range for the GREEN color output
0b = Lower range 0%–66.7%
1b = Higher range 33.3%–100% |
192 |
DC_RANGE_R |
Dot–correction adjustment range for the RED color output
0b = Lower range 0%–66.7%
1b = Higher range 33.3%–100% |