ZHCSO46 December   2021 TCAN1057AEV-Q1

PRODUCTION DATA  

  1. 特性
  2. 应用
  3. 说明
  4. Revision History
  5. Pin Configuration and Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 ESD Ratings Table — IEC Specifications
    4. 6.4 Recommended Operating Conditions
    5. 6.5 Thermal Characteristics
    6. 6.6 Supply Characteristics
    7. 6.7 Dissipation Ratings
    8. 6.8 Electrical Characteristics
    9. 6.9 Switching Characteristics
  7. Parameter Measurement Information
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Pin Description
        1. 8.3.1.1 TXD
        2. 8.3.1.2 GND
        3. 8.3.1.3 VCC
        4. 8.3.1.4 RXD
        5. 8.3.1.5 VIO
        6. 8.3.1.6 CANH and CANL
        7. 8.3.1.7 S (Silent)
      2. 8.3.2 CAN Bus States
      3. 8.3.3 TXD Dominant Timeout (DTO)
      4. 8.3.4 CAN Bus Short-Circuit Current Limiting
      5. 8.3.5 Thermal Shutdown (TSD)
      6. 8.3.6 Undervoltage Lockout
      7. 8.3.7 Unpowered Device
      8. 8.3.8 Floating Pins
    4. 8.4 Device Functional Modes
      1. 8.4.1 Operating Modes
      2. 8.4.2 Normal Mode
      3. 8.4.3 Silent Mode
      4. 8.4.4 Driver and Receiver Function
  9. Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
        1. 9.2.1.1 CAN Termination
      2. 9.2.2 Detailed Design Procedures
        1. 9.2.2.1 Bus Loading, Length and Number of Nodes
      3. 9.2.3 Application Curves
      4. 9.2.4 System Examples
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Documentation Support
    2. 12.2 接收文档更新通知
    3. 12.3 支持资源
    4. 12.4 Trademarks
    5. 12.5 Electrostatic Discharge Caution
    6. 12.6 术语表
  13. 13Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

Switching Characteristics

Over recommended operating conditions with TA = -40℃ to 150℃ (unless otherwise noted).
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Device Switching Characteristics
tPROP(LOOP1) Total loop delay
Driver input (TXD) to receiver output (RXD), recessive to dominant
S = 0 V, VIO = 2.8 V to 5.5 V
RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pF;
See Figure 7-4
125 210 ns
tPROP(LOOP1) Total loop delay
Driver input (TXD) to receiver output (RXD), recessive to dominant
S = 0 V, VIO = 1.7 V
RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pF;
See Figure 7-4
165 255 ns
tPROP(LOOP2) Total loop delay
Driver input (TXD) to receiver output (RXD), dominant to recessive
S = 0 V, VIO = 2.8 V to 5.5 V
RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pF;
See Figure 7-4
150 210 ns
tPROP(LOOP2) Total loop delay
Driver input (TXD) to receiver output (RXD), dominant to recessive
S = 0 V, VIO = 1.7 V
RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pF;
See Figure 7-4
180 255 ns
tMODE Mode change time, from normal to silent or from silent to normal See Figure 7-5 20 µs
Driver Switching Characteristics
tpHR Propagation delay time, high TXD to driver recessive (dominant to recessive) S = 0 V
RL = 60 Ω, CL = 100 pF;
See Figure 7-2
80 ns
tpLD Propagation delay time, low TXD to driver dominant (recessive to dominant) 70 ns
tsk(p) Pulse skew (|tpHR - tpLD|) 14 ns
tR Differential output signal rise time 25 ns
tF Differential output signal fall time 50 ns
tTXD_DTO Dominant timeout S = 0 V
RL = 60 Ω, CL = 100 pF;
See Figure 7-6
1.2 4.0 ms
Receiver Switching Characteristics
tpRH Propagation delay time, bus recessive input to high output (dominant to recessive) S = 0 V
CL(RXD) = 15 pF;
See Figure 7-3
81 ns
tpDL Propagation delay time, bus dominant input to low output (recessive to dominant) 66 ns
tR RXD output signal rise time 10 ns
tF RXD output signal fall time 10 ns
FD Timing Characteristics
tBIT(BUS) Bit time on CAN bus output pins
tBIT(TXD) = 500 ns
S = 0 V
RL = 60 Ω, CL = 100 pF, CL(RXD) = 15 pF
ΔtREC = tBIT(RXD) - tBIT(BUS) ;
See Figure 7-4
450 525 ns
Bit time on CAN bus output pins
tBIT(TXD) = 200 ns
160 205 ns
Bit time on CAN bus output pins
tBIT(TXD) = 125 ns(1)
85 130 ns
tBIT(RXD) Bit time on RXD output pins
tBIT(TXD) = 500 ns
410 540 ns
Bit time on RXD output pins
tBIT(TXD) = 200 ns
130 210 ns
Bit time on RXD output pins
tBIT(TXD) = 125 ns(1)
75 135 ns
ΔtREC Receiver timing symmetry
tBIT(TXD) = 500 ns
-50 20 ns
Receiver timing symmetry
tBIT(TXD) = 200 ns
-40 10 ns
Receiver timing symmetry
tBIT(TXD) = 125 ns(1)
-40 10 ns
Measured during characterization and not an ISO 11898-2:2016 parameter.