SLLS396G SEPTEMBER   1999  – December 2015 SN65LVDS104 , SN65LVDS105

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Selection Guide to LVDS Repeaters
  6. 6 Pin Configuration and Functions
  7. 7 Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings—JEDEC
    3. 7.3  ESD Ratings—MIL-STD
    4. 7.4  Recommended Operating Conditions
    5. 7.5  Thermal Information
    6. 7.6  SN65LVDS104 Electrical Characteristics
    7. 7.7  SN65LVDS105 Electrical Characteristics
    8. 7.8  SN65LVDS104 Switching Characteristics
    9. 7.9  SN65LVDS105 Switching Characteristics
    10. 7.10 Dissipation Ratings
    11. 7.11 Typical Characteristics
  8. 8 Parameter Measurement Information
  9. 9 Detailed Description
    1. 9.1 Overview
    2. 9.2 Functional Block Diagram
    3. 9.3 Feature Description
      1. 9.3.1 Fail Safe
    4. 9.4 Device Functional Modes
      1. 9.4.1 Input Level Translation
  10. 10Application and Implementation
    1. 10.1 Application Information
    2. 10.2 Typical Application
      1. 10.2.1 Point-to-Point Communications
      2. 10.2.2 Design Requirements
      3. 10.2.3 Detailed Design Procedure
        1. 10.2.3.1  Bypass Capacitance
        2. 10.2.3.2  Driver Supply Voltage
        3. 10.2.3.3  Driver Input Voltage
        4. 10.2.3.4  Driver Output Voltage
        5. 10.2.3.5  Interconnecting Media
        6. 10.2.3.6  PCB Transmission Lines
        7. 10.2.3.7  Termination Resistor
        8. 10.2.3.8  Receiver Supply Voltage
        9. 10.2.3.9  Receiver Input Common-Mode Range
        10. 10.2.3.10 Receiver Input Signal
        11. 10.2.3.11 Receiver Output Signal
      4. 10.2.4 Application Curve
    3. 10.3 Multidrop Communications
      1. 10.3.1 Design Requirements
      2. 10.3.2 Detailed Design Procedure
        1. 10.3.2.1 Interconnecting Media
  11. 11Power Supply Recommendations
    1. 11.1 Coupling Capacitor Recommendations
  12. 12Layout
    1. 12.1 Layout Guidelines
      1. 12.1.1 Microstrip vs. Stripline Topologies
      2. 12.1.2 Dielectric Type and Board Construction
      3. 12.1.3 Recommended Stack Layout
      4. 12.1.4 Separation Between Traces
      5. 12.1.5 Crosstalk and Ground Bounce Minimization
      6. 12.1.6 Decoupling
    2. 12.2 Layout Example
  13. 13Device and Documentation Support
    1. 13.1 Related Links
    2. 13.2 Community Resources
    3. 13.3 Trademarks
    4. 13.4 Electrostatic Discharge Caution
    5. 13.5 Glossary
  14. 14Mechanical, Packaging, and Orderable Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • PW|16
  • D|16
散热焊盘机械数据 (封装 | 引脚)
订购信息

8 Parameter Measurement Information

SN65LVDS104 SN65LVDS105 pm_104def_lls396.gif Figure 13. SN65LVDS104 Voltage and Current Definitions

Table 1. SN65LVDS104 Minimum and Maximum Input Threshold Test Voltages

APPLIED
VOLTAGES		 RESULTING
DIFFERENTIAL
INPUT VOLTAGE		 RESULTING
COMMON-MODE
INPUT VOLTAGE
VIA VIB VID VIC
1.25 V 1.15 V 100 mV 1.2 V
1.15 V 1.25 V –100 mV 1.2 V
2.4 V 2.3 V 100 mV 2.35 V
2.3 V 2.4 V –100 mV 2.35 V
0.1 V 0 V 100 mV 0.05 V
0 V 0.1 V –100 mV 0.05 V
1.5 V 0.9 V 600 mV 1.2 V
0.9 V 1.5 V –600 mV 1.2 V
2.4 V 1.8 V 600 mV 2.1 V
1.8 V 2.4 V –600 mV 2.1 V
0.6 V 0 V 600 mV 0.3 V
0 V 0.6 V –600 mV 0.3 V
SN65LVDS104 SN65LVDS105 pm_104vod_lls396.gif Figure 14. SN65LVDS104 VOD Test Circuit
SN65LVDS104 SN65LVDS105 pm_104test_lls396.gif
A. All input pulses are supplied by a generator having the following characteristics: tr or tf≤ 1 ns, Pulse Repetition Rate (PRR) = 0.5 Mpps, and pulse width = 500 ± 10 ns.
B. CL includes instrumentation and fixture capacitance within 0.06 m of the device under test. The measurement of VOC(PP) is made on test equipment with a –3 dB bandwidth of at least 300 MHz.
Figure 15. SN65LVDS104 Test Circuit and Definitions for the Driver Common-Mode Output Voltage
SN65LVDS104 SN65LVDS105 pm_104ttim_lls396.gif
A. All input pulses are supplied by a generator having the following characteristics: tr or tf ≤ 1 ns, Pulse Repetition Rate (PRR) = 50 Mpps, and pulse width = 10 ± 0.2 ns.
B. CL includes instrumentation and fixture capacitance within 0.06 m of the device under test.
Figure 16. SN65LVDS104 Test Circuit, Timing, and Voltage Definitions for the Differential Output Signal
SN65LVDS104 SN65LVDS105 pm_104enab_lls396.gif
A. All input pulses are supplied by a generator having the following characteristics: tr or tf≤ 1 ns, Pulse Repetition Rate (PRR) = 0.5 Mpps, and pulse width = 500 ± 10 ns.
B. CL includes instrumentation and fixture capacitance within 0.06 m of the device under test.
Figure 17. SN65LVDS104 Enable and Disable Time Circuit and Definitions
SN65LVDS104 SN65LVDS105 pm_105vol_lls396.gif Figure 18. SN65LVDS105 Voltage and Current Definitions
SN65LVDS104 SN65LVDS105 pm_105vod_lls396.gif Figure 19. SN65LVDS105 VOD Test Circuit
SN65LVDS104 SN65LVDS105 pm_105test_lls396.gif
A. All input pulses are supplied by a generator having the following characteristics: tr or tf≤ 1 ns, Pulse Repetition Rate (PRR) = 0.5 Mpps, and pulse width = 500 ± 10 ns.
B. CL includes instrumentation and fixture capacitance within 0.06 m of the device under test. The measurement of VOC(PP) is made on test equipment with a -3 dB bandwidth of at least 300 MHz.
Figure 20. SN65LVDS105 Test Circuit and Definitions for the Driver Common-Mode Output Voltage
SN65LVDS104 SN65LVDS105 pm_105ttim_lls396.gif
A. All input pulses are supplied by a generator having the following characteristics: tr or tf≤ 1 ns, Pulse Repetition Rate (PRR) = 50 Mpps, and pulse width = 10 ± 0.2 ns.
B. CL includes instrumentation and fixture capacitance within 0.06 m of the device under test.
Figure 21. SN65LVDS105 Test Circuit, Timing, and Voltage Definitions for the Differential Output Signal
SN65LVDS104 SN65LVDS105 pm_105enab_lls396.gif
A. All input pulses are supplied by a generator having the following characteristics: tr or tf≤ 1 ns, Pulse Repetition Rate (PRR) = 0.5 Mpps, and pulse width = 500 ± 10 ns.
B. CL includes instrumentation and fixture capacitance within 0.06 m of the device under test.
Figure 22. SN65LVDS105 Enable and Disable Time Circuit and Definitions