SNVS096E June   1999  – July 2016 LP2954 , LP2954A

PRODUCTION DATA.  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Pin Configuration and Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Typical Characteristics
  7. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagrams
    3. 7.3 Feature Description
      1. 7.3.1 Dropout Voltage
      2. 7.3.2 Dropout Detection Comparator
      3. 7.3.3 Output Isolation
      4. 7.3.4 Reducing Output Noise
    4. 7.4 Device Functional Modes
      1. 7.4.1 Shutdown Input
  8. Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 External Capacitors
        2. 8.2.2.2 Minimum Load
        3. 8.2.2.3 Programming The Output Voltage
        4. 8.2.2.4 Power Dissipation
        5. 8.2.2.5 Estimating Junction Temperature
        6. 8.2.2.6 Heatsinking the TO-220 Package
      3. 8.2.3 Application Curves
  9. Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Related Documentation
    2. 11.2 Related Links
    3. 11.3 Receiving Notification of Documentation Updates
    4. 11.4 Community Resources
    5. 11.5 Trademarks
    6. 11.6 Electrostatic Discharge Caution
    7. 11.7 Glossary
  12. 12Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(2)(1)
MIN MAX UNIT
Input supply voltage –20 30 V
Power dissipation(2) Internally Limited
Storage temperature, Tstg –65 150 °C
(1) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and specifications.
(2) At elevated temperatures, device power dissipation must be derated based on package thermal resistance and heat sink values (if a heat sink is used). If power dissipation causes the junction temperature to exceed specified limits, the device goes into thermal shutdown.

6.2 ESD Ratings

VALUE UNIT
V(ESD) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±2000 V
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)
MIN NOM MAX UNIT
Operating junction temperature –40 125 °C

6.4 Thermal Information

THERMAL METRIC(1) LP2954, LP2954A UNIT
KTT (DDPAK/TO-263) NDE (TO-220) D (SOIC)
3 PINS 3 PINS 8 PINS
RθJA(2) Junction-to-ambient thermal resistance, High-K 44.3 80.3(3) 105.0 °C/W
RθJC(top) Junction-to-case (top) thermal resistance 44.8 38.6 47.3 °C/W
RθJB Junction-to-board thermal resistance 23.8 73.1 45.8 °C/W
ψJT Junction-to-top characterization parameter 10.6 13.5 6.2 °C/W
ψJB Junction-to-board characterization parameter 22.7 73.1 45.2 °C/W
RθJC(bot) Junction-to-case (bottom) thermal resistance 1.0 0.9 °C/W
(1) For more information about traditional and new thermal metrics, see Semiconductor and IC Package Thermal Metrics.
(2) Thermal resistance value RθJA is based on the EIA/JEDEC High-K printed circuit board defined by JESD51-7 - High Effective Thermal Conductivity Test Board for Leaded Surface Mount Packages.
(3) The TO-220 (NDE) package is vertically mounted in center of JEDEC High-K test board (JESD 51-7) with no additional heat sink. This is a through-hole package; this is NOT a surface mount package.

6.5 Electrical Characteristics

Limits are specified by production testing or correlation techniques using standard Statistical Quality Control (SQC) methods. Unless otherwise noted: TJ = 25°C, VIN = 6 V, IL = 1 mA, CL = 2.2 μF
PARAMETER TEST CONDITIONS LP2954AI LP2954I UNIT
MIN TYP MAX MIN TYP MAX
VO Output voltage(1) 4.975 5 5.025 4.95 5 5.05 V
−40°C to 125°C 4.94 5.06 4.9 5.1
1 mA ≤ IL ≤ 250 mA 5 5
1 mA ≤ IL ≤ 250 mA
−40°C to 125°C
4.93 5.07 4.88 5.12
ΔVO/ΔT Output voltage temperature coefficient See(2), –40°C ≤ TJ ≤ 125°C 20 100 20 150 ppm/°C
ΔVO/VO Line regulation VIN = 6 V to 30 V 0.03% 0.1% 0.03% 0.2%
VIN = 6 V to 30 V
–40°C ≤ TJ ≤ 125°C
0.2% 0.3%
ΔVO/VO Load regulation IL = 1 to 250 mA
IL = 0.1 to 1 mA(3)
0.04% 0.16% 0.04% 0.2%
IL = 1 to 250 mA
IL = 0.1 to 1 mA
–40°C ≤ TJ ≤ 125°C
0.2% 0.3%
VIN – VO Dropout voltage(4) IL = 1 mA 60 100 60 100 mV
IL = 1 mA
–40°C ≤ TJ ≤ 125°C
150 150
IL = 50 mA 240 300 240 300
IL = 50 mA,
–40°C ≤ TJ ≤ 125°C
420 420
IL = 100 mA 310 400 310 400
IL = 100 mA
–40°C ≤ TJ ≤ 125°C
520 520
IL = 250 mA 470 600 470 600
IL = 250 mA
–40°C ≤ TJ ≤ 125°C
800 800
IGND Ground pin current(5) IL = 1 mA 90 150 90 150 µA
IL = 1 mA
–40°C ≤ TJ ≤ 125°C
180 180
IL = 50 mA 1.1 2 1.1 2 mA
IL = 50 mA
–40°C ≤ TJ ≤ 125°C
2.5 2.5
IL = 100 mA 4.5 6 4.5 6
IL = 100 mA
–40°C ≤ TJ ≤ 125°C
8 8
IL = 250 mA 21 28 21 28
IL = 250 mA
–40°C ≤ TJ ≤ 125°C
33 33
IGND Ground pin current at dropout(5) VIN = 4.5 V 120 170 120 170 µA
VIN = 4.5 V
–40°C ≤ TJ ≤ 125°C
210 210
ILIMIT Current limit VO = 0 V 380 500 380 500 mA
VO = 0 V
–40°C ≤ TJ ≤ 125°C
530 530
ΔVO/ΔPD Thermal regulation See(6) 0.05 0.2 0.05 0.2 %/W
en Output noise
10 Hz to 100 kHz
IL = 100 mA, CL = 2.2 µF 400 400 μVRMS
IL = 100 mA, CL = 33 µF 260 260
IL = 100 mA, CL = 33 µF(7) 80 80
ADDITIONAL SPECIFICATIONS FOR THE ADJUSTABLE DEVICE (LP2954AIM and LP2954IM)
VREF Reference voltage See(8) 1.215 1.23 1.245 1.205 1.23 1.255 V
See(8)
–40°C ≤ TJ ≤ 125°C
1.205 1.255 1.19 1.27
ΔVREF/
VREF
Reference voltage line regulation VIN= 2.5 V to VO(NOM) + 1 V 0.03% 0.1% 0.03% 0.2%
VIN= 2.5 V to VO(NOM) +1 V to 30 V(9)(8)–40°C ≤ TJ ≤ 125°C 0.2% 0.4%
ΔVREF/ΔT Reference voltage temperature coefficient See(2)
–40°C ≤ TJ ≤ 125°C
20 ppm/°C
IB(FB) Feedback pin bias current 20 40 20 40 nA
–40°C ≤ TJ ≤ 125°C 60 60
IGND Ground pin current at shutdown(5) VSHUTDOWN ≤ 1.1 V 105 140 105 140 μA
IO(SINK) Output OFF pulldown current See(10) 30 30 mA
See(10)
–40°C ≤ TJ ≤ 125°C
20 20
DROPOUT DETECTION COMPARATOR
IOH Output HIGH leakage current VOH = 30 V 0.01 1 0.01 1 µA
VOH = 30 V, –40°C ≤ TJ ≤ 125°C 2 2
VOL Output LOW voltage VIN = VO(NOM) − 0.5 V
IO(COMP) = 400 μA
–40°C ≤ TJ ≤ 125°C
150 250 150 250 mV
400 400
VTHR(MAX) Upper threshold voltage See(11) –80 –60 –35 –80 –60 –35 mV
See(11)
–40°C ≤ TJ ≤ 125°C
–95 –25 –95 –25
VTHR(MIN) Lower threshold voltage See(11) –110 –85 –55 –110 –85 –55 mV
See(11)
–40°C ≤ TJ ≤ 125°C
–160 –40 –160 –40
HYST Hysteresis See(11) 15 15 mV
SHUTDOWN INPUT
VOS Input offset voltage (Referred to VREF) −7.5 ±3 7.5 −7.5 ±3 7.5 mV
(Referred to VREF), –40°C ≤ TJ ≤ 125°C –10 10 –10 10
HYST Hysteresis 6 6 mV
IB Input bias current VIN(SHUTDOWN) = 0 V to 5 V –30 10 30 –30 10 30 nA
VIN(SHUTDOWN) = 0 V to 5 V,
–40°C ≤ TJ ≤ 125°C
–50 50 –50 50
(1) When used in dual-supply systems where the regulator load is returned to a negative supply, the output voltage must be diode-clamped to ground.
(2) Output voltage temperature coefficient is defined as the worst-case voltage change divided by the total temperature range.
(3) Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts are tested separately for load regulation in the load ranges 0.1 mA to 1 mA and 1 mAto 250 mA. Changes in output voltage due to heating effects are covered by the thermal regulation specification.
(4) Dropout voltage is defined as the input-to-output differential at which the output voltage drops 100 mV below the value measured with a 1-V differential.
(5) GND pin current is the regulator quiescent current. The total current drawn from the source is the sum of the load current plus the GND pin current.
(6) Thermal regulation is defined as the change in output voltage at a time T after a change in power dissipation is applied, excluding load or line regulation effects. Specifications are for 200-mA load pulse at VIN = 20 V (3-W pulse) for T = 10 ms.
(7) Connect a 0.1-μF capacitor from the OUT pin to the FEEDBACK pin.
(8) VREF ≤ VOUT ≤ (VIN − 1 V), 2.3 V ≤ VIN ≤ 30 V, 100 μA ≤ IL≤ 250 mA.
(9) Two separate tests are performed, one covering VIN = 2.5 V to VO(NOM) + 1 V and the other test for VIN = 2.5 V to VO(NOM) + 1 V to 30 V.
(10) VSHUTDOWN ≤ 1.1 V, VOUT = VO(NOM).
(11) Comparator thresholds are expressed in terms of a voltage differential at the FEEDBACK pin below the nominal reference voltage measured at VIN = VO(NOM) + 1 V. To express these thresholds in terms of output voltage change, multiply by the error amplifier gain, which is VOUT/VREF = (R1 + R2 ) / R2.

6.6 Typical Characteristics

LP2954 LP2954A 01112812.png
Figure 1. Quiescent Current
LP2954 LP2954A 01112814.png
Figure 3. Ground Pin Current vs Load
LP2954 LP2954A 01112813.png
Figure 2. Quiescent Current
LP2954 LP2954A 01112815.png
Figure 4. Ground Pin Current
LP2954 LP2954A 01112816.png
Figure 5. Ground Pin Current
LP2954 LP2954A 01112818.png
Figure 7. Ripple Rejection
LP2954 LP2954A 01112820.png
Figure 9. Ripple Rejection
LP2954 LP2954A 01112826.png
Figure 11. Dropout Characteristics
LP2954 LP2954A 01112828.png
Figure 13. Short-Circuit Output Current and Maximum Output Current
LP2954 LP2954A 01112817.png
Figure 6. Output Noise Voltage
LP2954 LP2954A 01112819.png
Figure 8. Ripple Rejection
LP2954 LP2954A 01112823.png
Figure 10. Output Impedance
LP2954 LP2954A 01112827.png
Figure 12. Thermal Response
LP2954 LP2954A 01112811.png
Figure 14. Maximum Power Dissipation (DDPAK/TO-263)