3 说明
ISO7841x 器件是一款高性能四通道数字隔离器,隔离电压为 8000VPK。该器件已通过符合 VDE、CSA、CQC 和 TUV 标准的增强型隔离认证。在隔离互补金属氧化物半导体 (CMOS) 或者低电压互补金属氧化物半导体 (LVCMOS) 数字 I/O 时,该隔离器可提供高电磁抗扰度和低辐射,同时具备低功耗特性。每个隔离通道都有一个由二氧化硅 (SiO2) 绝缘隔栅分开的逻辑输入和输出缓冲器。
该器件配有使能引脚,可用于将多个主驱动应用中的相应输出置于 高阻抗状态, 也可用于降低功耗。ISO7841 器件具有 3 个正向通道和 1 个反向通道。如果出现输入功率或信号丢失,ISO7841 器件默认输出高电平,ISO7841F 器件默认输出低电平。有关更多详细信息,请参阅 Device Functional Modes器件功能模式部分。
与隔离式电源结合使用时,该器件有助于防止数据总线或者其他电路中的噪声电流进入本地接地,进而干扰或损坏敏感电路。凭借创新的芯片设计和布线技术,ISO7841 器件的电磁兼容性得到了显著增强,可确保提供系统级 ESD、EFT 和浪涌保护并符合辐射标准。
ISO7841 器件采用 16 引脚 SOIC 宽体 (DW) 和超宽体 (DWW) 封装。
产品型号 |
封装 |
封装尺寸(标称值) |
ISO7841
ISO7841F |
DW (16) |
10.30mm x 7.50mm |
DWW (16) |
10.30mm x 14.0mm |
- 要了解所有可用封装,请参阅数据表末尾的可订购产品附录。
4 修订历史记录
Changes from F Revision (April 2016) to G Revision
-
Changed part numbers in the Power Ratings table (previously Power Dissipation Characteristics) Go
-
Changed the input-to-output test voltage parameter to apparent charge in the Insulation Specifications Go
-
Added 接收文档更新通知部分Go
Changes from E Revision (March 2016) to F Revision
-
Changed 隔离层寿命年数(特性部分)Go
-
VDE 认证现在已完成Go
-
Changed VCCO to VCCI for the minimum value of the input threshold voltage hysteresis parameter in all electrical characteristics tablesGo
-
Added VCM to the test condition of the common-mode transient immunity parameter in all electrical characteristics tablesGo
-
Added the lifetime projection graphs for DW and DWW packages to the Safety Limiting Values section Go
Changes from D Revision (December 2015) to E Revision
-
更改了“安全及管理批准”列表特性Go
-
在特性中添加了“符合 EN 61010-1 和 EN 60950-1 标准的 TUV 认证”Go
-
将说明的第一段中的文本从“符合 VDE、CSA 和 CQC 的认证” 更改为“符合 VDE、CSA、CQC 和 TUV 的认证。”Go
-
Added Note 1 to Insulation Characteristics Go
-
Changed IEC 60664-1 Ratings TableGo
-
Added TUV to the Regulatory Information section and Regulatory Information. Deleted Note 1 in Regulatory Information Go
-
Changed Device I/O Schematics Go
Changes from C Revision (July 2015) to D Revision
-
在特性中添加了“完成了 DW 封装认证;规划了 DWW 认证”Go
-
向说明部分添加了文本:“和超宽体 (DWW) 封装”。Go
-
已将封装“超宽 SOIC、DWW (16)”添加至器件信息表Go
-
Added the 16-DWW Package to Package Insulation and Safety-Related SpecificationsGo
-
Added the DWW package information to Package Insulation and Safety-Related SpecificationsGo
-
Added the DWW package information to Regulatory InformationGo
-
Changed the MIN value of CMTI in Electrical Characteristics—5-V Supply, 5 V table From: 70 To: 100 kV/μs, deleted the TYP value of 100 kV/μsGo
-
Added the Supply Current - ISO7841DW and ISO7841FDW section to the Supply Current Characteristics—5-V SupplyGo
-
Added the Supply Current - ISO7841DWW and ISO7841FDWW section to the Supply Current Characteristics—5-V Supply Go
-
Changed the MIN value of CMTI in Electrical Characteristics—3.3-V Supply, 5 V table From: 70 To: 100 kV/μs, deleted the TYP value of 100 kV/μsGo
-
Added the Supply Current - ISO7841DW and ISO7841FDW section to the Electrical Characteristics—3.3-V SupplyGo
-
Added the Supply Current - ISO7841DWW and ISO7841FDWW section to the Electrical Characteristics—3.3-V Supply Go
-
Changed the MIN value of CMTI in Electrical Characteristics—2.5-V Supply, 5 V table From: 70 To: 100 kV/μs, deleted the TYP value of 100 kV/μsGo
-
Added the Supply Current - ISO7841DW and ISO7841FDW section to the Supply Current Characteristics—2.5-V SupplyGo
-
Added the Supply Current - ISO7841DWW and ISO7841FDWW section to the Supply Current Characteristics—2.5-V Supply Go
-
Added text to the Application Information section: " isolation voltage per UL 1577." Go
Changes from B Revision (January 2015) to C Revision
-
已添加器件 ISO7481F 至数据表Go
-
已更改 说明以包含“ISO7841 器件默认输出为“高”,ISO7841F 器件默认输出为“低””。Go
-
Changed From: tPLH and tPHLat 5.5V To: tPLH and tPHL at 5.0 V Go
-
Changed Default Output Delay Time Test Circuit and Voltage WaveformsGo
-
Added the Device I/O Schematics section Go
Changes from A Revision (January 2015) to B Revision
-
已将文档标题从“四通道数字隔离器”更改为“四通道 3/1 数字隔离器”Go
-
在特性部分添加了“2.25V 至 5.5V 电平转换”Go
-
将特性中的“宽体 SOIC-16 封装”更改为“宽体和超宽体 SOIC-16 封装选项”Go
-
更改了特性Go
-
VDE 认证现在已完成Go
-
更改了简化电路原理图并增加了注释 1 和注释 2Go
-
Added the Power Dissipation Characteristics tableGo
-
Changed Package Insulation and Safety-Related Specifications title From: IEC Insulation and Safety-Related Specifications for DW-16 Package To: Package Insulation and Safety-Related SpecificationsGo
-
Changed Package Insulation and Safety-Related SpecificationsGo
-
Changed Insulation Characteristics title From: DIN V VDE 0884-10 (VDE V 0884-10) and UL 1577 Insulation Characteristics To: Insulation CharacteristicsGo
-
Changed Insulation Characteristics Go
-
Changed the Test Condition of CTI of the table in Package Insulation and Safety-Related Specifications Go
-
Changed the MIN value of CTI From" > 600 V To: 600 V Go
-
Changed title From: Regulatory Information (All Certifications Planned)Regulatory Information (All Certifications Planned) To: Regulatory InformationGo
-
Changed the table in Regulatory InformationGo
-
Changed Safety Limiting Values, added IS DW-16 package options Go
-
Changed Switching Characteristics Test Circuit and Voltage Waveforms Go
-
Changed Enable/Disable Propagation Delay Time Test Circuit and Waveform Go
-
Changed From: VCC1 To: VCCI in Default Output Delay Time Test Circuit and Voltage WaveformsGo
-
Changed Common-Mode Transient Immunity Test CircuitGo
-
Deleted INPUT-SIDE and OUTPUT-SIDE from columns 1 and 2 of Function Table Go
-
Changed the Application Information section Go
-
Changed the Application Information section Go
Changes from * Revision (November 2014) to A Revision