4 修订历史记录
Changes from E Revision (January 2015) to F Revision
- 将温度范围从 0°C 到 70ºC 更改为 –40°C 到 85ºC。Go
- Changed TA To: –40°C MIN and 85°C MAX From: 0°C MIN and 70°C MAX in the Recommended Operating Conditions tableGo
- Changed the PD values From: MIN = 15.5, MAX = 21.6 To: MIN = 2.8, MAX = 4.4 in the Dissipation Ratings tableGo
Changes from D Revision (December 2015) to E Revision
- Changed "over the full industrial temperature range of –40°C to 70°C" To: "over the commercial temperature range of 0°C to 70°C" in the Overview sectionGo
Changes from C Revision (July 2015) to D Revision
- Changed "full industrial temperature range of –40°C to 85°C" To: "full industrial temperature range of 0°C to 70°C" in the Overview sectionGo
Changes from B Revision (November 2013) to C Revision
- Added 引脚配置和功能 部分、ESD 额定值 表、特性 说明 部分、器件功能模式、应用和实施 部分、电源相关建议 部分、布局 部分、器件和文档支持 部分以及机械、封装和可订购信息 部分Go
- 已删除订购信息表Go
Changes from A Revision (February 2012 ) to B Revision
- Added 额外特性:双向“复用/解复用” ("MUX/de-MUX") 差动开关Go
- 已添加此器件支持 XAUI 和 SGMII 的内容Go
- Changed 温度范围“–40°C 至 85ºC”至“0°C 至 70ºC”并删除了说明部分中的“工业” 部分添加了 EDI 固件功能列表.Go
- Changed pin description of NC From: Electrically not connected. To: Electrically not connected. May connect to VDD or GND, or leave unconnectedGo
- Added the Application Information sectionGo
Changes from * Revision (January 2012 ) to A Revision
- Changed 将差分 BW 特性着要点由“7.5GHZ”改为“8GHz”Go
- Changed 将动态特性子着重号从 “隔离” 改为 “断开隔离”Go
- Changed 将动态特性子着重号回波损耗从 "-9dB" 改为 "-11dB"Go
- Deleted 动态特性子着重号 "最大内部对(位-位)偏斜"Go
- Changed ESD, Human body model, MAX voltage from "±2000" to "±4,000" in Absolute Maximum Ratings tableGo
- Changed ILK spec (Diff I/O pins) MAX value from "4 µA" to "130 µA" and added [Ports B and C] and [Port A] to Conditions statements.Go
- Changed tPD spec MAX delay from "50" ps to "85" ps in Device Parameters tableGo
- Changed SEL-to-switch Ton and Toff spec TYP values from "175" ns to "70" ns; in the Device Parameters tableGo
- Changed TSKEW_Inter and TSKEW_Intra spec MAX values from "5 ps" and "4 ps" respectively, to "20 ps" and "8 ps" respectively, in Electrical Characteristics table.Go
- Changed RL spec TYP value from "–25" and "–9" dB to "–28" and "–11" dB for f=0.3 MHz and f=4000 MHz, respectively, in Electrical Characteristics table. Go
- Changed OIRR spec TYP value from "–70" to "–75" dB for f=0.3 MHz, in Electrical Characteristics table. Go
- Changed BW spec TYP value from "7.5" GHz to "8" GHz in Electrical Characteristics table.Go
- Changed graphic image for Figure 3.Go
- Changed graphic image for Figure 4Go