ZHCSH46C December   2017  – June 2022 AMC1311

PRODUCTION DATA  

  1. 特性
  2. 应用
  3. 说明
  4. Revision History
  5. Device Comparison Table
  6. Pin Configuration and Functions
  7. Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Recommended Operating Conditions
    4. 7.4  Thermal Information
    5. 7.5  Power Ratings
    6. 7.6  Insulation Specifications
    7. 7.7  Safety-Related Certifications
    8. 7.8  Safety Limiting Values
    9. 7.9  Electrical Characteristics
    10. 7.10 Switching Characteristics
    11. 7.11 Timing Diagram
    12. 7.12 Insulation Characteristics Curves
    13. 7.13 Typical Characteristics
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Analog Input
      2. 8.3.2 Isolation Channel Signal Transmission
      3. 8.3.3 Analog Output
    4. 8.4 Device Functional Modes
  9. Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Input Filter Design
        2. 9.2.2.2 Differential to Single-Ended Output Conversion
      3. 9.2.3 Application Curve
    3. 9.3 What To Do and What Not To Do
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Documentation Support
      1. 12.1.1 Related Documentation
    2. 12.2 接收文档更新通知
    3. 12.3 支持资源
    4. 12.4 Trademarks
    5. 12.5 Electrostatic Discharge Caution
    6. 12.6 术语表
  13. 13Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

Revision History

Changes from Revision B (May 2020) to Revision C (June 2022)

  • 将隔离标准从 DIN VDE V 0884-11 (VDE V 0884-11) 更改为 DIN EN IEC 60747-17 (VDE 0884-17),并相应更新了绝缘规格安全相关认证Go
  • 更改了特性 部分Go
  • 更改了说明 部分Go
  • Changed TA range for AMC1311B from –40°C to +125°C to –55°C to +125°C in Device Comparison Table Go
  • Changed CMTI value for AMC1311B from 75 kV/μs to 100 kV/μs in Device Comparison Table Go
  • Changed pin names: VIN to IN, VOUTP to OUTP, and VOUTN to OUTNGo
  • Merged VOS specs for 4.5V ≤ VDD1 ≤ 5.5 V and 3.0 V ≤ VDD1 ≤ 5.5 V ranges (AMC1311B only)Go
  • Changed VDD1 DC PSRR from –65 dB (typical) to –80 dB (typical)Go
  • Changed CMTI from 75 kV/µs (minimum), 140 kV/µs (typical) to 100 kV/µs (minimum), 150kV/µs (typical) (AMC1311B only)Go
  • Changed VDD1UV (VDD1 falling) from 1.75 V / 2.53 V / 2.7 V to 2.4 V / 2.6 V / 2.8 V (minimum / typical / maximum)Go
  • Changed Rise, Fall, and Delay Time Definition timing diagramGo
  • Changed Reinforced Isolation Capacitor Lifetime Projection figure Go
  • Deleted histogram plots from Typical Characteristics sectionGo
  • Changed Overview sectionGo
  • Changed functional block diagramGo
  • Changed the Analog Input sectionGo
  • Changed Isolation Channel Signal Transmission sectionGo
  • Deleted Fail-Safe Output section, added Analog Output sectionGo
  • Changed Application Information section for clarityGo
  • Changed Typical Application section and subsectionsGo
  • Added Input Filter Design sectionGo
  • Added Differential to Single-Ended Output Conversion sectionGo
  • Changed Step Response of the AMC1311 figureGo
  • Changed Application Curve sectionGo
  • Changed What To Do and What Not To Do sectionGo
  • Changed Power Supply Recommendations sectionGo
  • Changed Layout sectionGo
  • Changed Layout Guidelines sectionGo
  • Changed recommended layout drawingGo

Changes from Revision A (June 2018) to Revision B (May 2020)

  • 特性 部分的 AMC1311B 温漂从 ±15μV/°C(最大值)更改为 10μV/°C(最大值) Go
  • 特性 部分的 AMC1311B 增益误差从 ±0.3%(最大值)更改为 ±0.2%(最大值),并将 AMC1311B 增益漂移从 ±45ppm/°C(最大值)更改为 ±40ppm/°C(最大值) Go
  • IEC 60950-1 和 IEC60065 更改为 IEC 62368-1 Go
  • Changed AMC1311B values for TCVOS, EG, and TCEG in Device Comparison Table Go
  • Changed AMC1311B values for TCVOS, EG, and TCEG in Device Comparison Table Go
  • Added ESD classification levels to ESD Ratings tableGo
  • Changed CLR and CPG values from 9 mm to 8.5 mmGo
  • Changed Insulation Specifications table per ISO standardGo
  • Changed Safety-Related Certification table per ISO standardGo
  • Changed Safety Limiting Values description as per ISO standardGo
  • Changed TCVOS parameter minimum value from –15 μV/°C to –10 μV/°C and maximum value from 15 μV/°C to 10μV/°C for the AMC1311B in the Electrical Characteristics tableGo
  • Changed EG parameter minimum value from –0.3% to –0.2% and maximum value from 0.3% to 0.2% for the AMC1311B in the Electrical Characteristics tableGo
  • Changed TCEG parameter minimum value from –45 ppm/°C to –40 ppm/°C and maximum value from 45 ppm/°C to 40 ppm/°C for the AMC1311B in the Electrical Characteristics tableGo
  • Changed Step Response of the AMC1311 figureGo