INA226-Q1
- AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to 125°C
- Device HBM ESD Classification 2
- Device CDM ESD Classification C4B
- Functional Safety-Capable
- Senses Bus Voltages From 0 V to 36 V
- High-Side or Low-Side Sensing
- Reports Current, Voltage, and Power
- High Accuracy:
- 0.1% Gain Error (Maximum)
- 10 µV Offset (Maximum)
- Configurable Averaging Options
- 16 Programmable Addresses
- Operates from 2.7-V to 5.5-V Power Supply
- 10-Pin, DGS (VSSOP) Package
The INA226-Q1 is a current shunt and power monitor with an I2C™- or SMBUS-compatible interface. The device monitors both a shunt voltage drop and bus supply voltage. Programmable calibration value, conversion times, and averaging, combined with an internal multiplier, enable direct readouts of current in amperes and power in watts.
The INA226-Q1 senses current on common-mode bus voltages that can vary from 0 V to 36 V, independent of the supply voltage. The device operates from a single 2.7-V to 5.5-V supply, drawing a typical of 330 µA of supply current. The device is specified over the operating temperature range between –40°C and 125°C and features up to 16 programmable addresses on the I2C-compatible interface.
技術資料
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
EVMX777BG-01-00-00 — J6Entry、RSP、TDA2E-17 CPU ボードの評価モジュール
EVMX777G-01-20-00 — J6Entry/RSP インフォテイメント(CPU、ディスプレイ、JAMR3)の評価モジュール
The J6Entry/RSP EVM is an evaluation platform designed to speed up development efforts and reduce time to market for applications such as Infotainment, reconfigurable Digital Cluster or Integrated Digital Cockpit.
The main CPU board integrates these key peripherals such as Ethernet or HDMI, while (...)
ASC-STUDIO-INA226 — ASC studio (SysConfig) for configuring all aspects of the INA226 digital power monitor
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
サポート対象の製品とハードウェア
製品
高精度オペアンプ (Vos が 1mV 未満)
汎用オペアンプ
オーディオ・オペアンプ
トランスインピーダンス・アンプ
高速オペアンプ (50MHz 以上のゲイン帯域幅:GBW)
パワー・オペアンプ
ビデオ・アンプ
ライン・ドライバ
トランスコンダクタンス・アンプとレーザー・ドライバ
完全差動アンプ
高精度 ADC
バイオセンシング AFE
高速 ADC(≧10 MSPS)
レシーバ
タッチスクリーン・コントローラ
差動アンプ
計測アンプ
オーディオ・ライン・レシーバ
アナログ電流センス・アンプ
デジタル電力モニタ
シャント抵抗を内蔵したアナログ電流センス・アンプ
シャント抵抗を内蔵したデジタル電力モニタ
ダイ / ウェハー・サービス
CS-AMPLIFIER-ERROR-TOOL — Current Sense Amplifier Comparison and Error Tool
サポート対象の製品とハードウェア
製品
アナログ電流センス・アンプ
デジタル電力モニタ
SBOR021 — Power Monitor Tool
サポート対象の製品とハードウェア
製品
デジタル電力モニタ
シャント抵抗を内蔵したデジタル電力モニタ
PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®
設計とシミュレーション向けの環境である PSpice for TI (...)
TINA-TI — SPICE ベースのアナログ・シミュレーション・プログラム
TINA-TI をインストールするには、約 500MB が必要です。インストールは簡単です。必要に応じてアンインストールも可能です。(そのようなことはないと思いますが)
TINA は DesignSoft (...)
TIDA-00302 — 堅牢な過渡特性の電流シャント・モニタ、リファレンス・デザイン
Additionally, an external protection circuit is implemented to provide surge and fast-transient protection and demonstrate the different immunity levels to (...)
パッケージ | ピン数 | ダウンロード |
---|---|---|
VSSOP (DGS) | 10 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点