UC3715

正在供货

具有单输入和可编程路通道至通道延迟的 0.5A/1A 双路栅极驱动器

立即订购

数据表

document-pdfAcrobat Complementary Switch FET Drivers 数据表 (Rev. B) (英语)

UC3715

正在供货

数据表

立即订购

产品详情

Number of channels

2

Power switch

MOSFET

Peak output current (A)

2

Input supply voltage (min) (V)

7

Input supply voltage (max) (V)

20

Features

Aux Output, Dead Time Control

Operating temperature range (°C)

0 to 70

Rise time (ns)

30

Fall time (ns)

25

Propagation delay time (µs)

0.05

Input threshold

TTL

Channel input logic

Inverting

Input negative voltage (V)

0

Rating

Military

Driver configuration

Aux Output

Number of channels

2

Power switch

MOSFET

Peak output current (A)

2

Input supply voltage (min) (V)

7

Input supply voltage (max) (V)

20

Features

Aux Output, Dead Time Control

Operating temperature range (°C)

0 to 70

Rise time (ns)

30

Fall time (ns)

25

Propagation delay time (µs)

0.05

Input threshold

TTL

Channel input logic

Inverting

Input negative voltage (V)

0

Rating

Military

Driver configuration

Aux Output

SOIC (D)

8

29.4 mm² 4.9 x 6

Single Input (PWM and TTL Compatible)
High-Current Power FET Driver, 1-A Source and
2-A Sink
Auxiliary Output FET Driver, 0.5-A Source and
1-A Sink
Time Delays Between Power and Auxiliary Outputs
Independently Programmable from 50 to 500-ns
Time Delay or True Zero-Voltage Operation Independently
Configurable for Each Output
Switching Frequency to 1 MHz
Typical 50-ns Propagation Delays
ENBL Pin Activates 220-µA Sleep Mode
Power Output is Active-Low in Sleep Mode
Synchronous Rectifier Driver

Single Input (PWM and TTL Compatible)
High-Current Power FET Driver, 1-A Source and
2-A Sink
Auxiliary Output FET Driver, 0.5-A Source and
1-A Sink
Time Delays Between Power and Auxiliary Outputs
Independently Programmable from 50 to 500-ns
Time Delay or True Zero-Voltage Operation Independently
Configurable for Each Output
Switching Frequency to 1 MHz
Typical 50-ns Propagation Delays
ENBL Pin Activates 220-µA Sleep Mode
Power Output is Active-Low in Sleep Mode
Synchronous Rectifier Driver

These two families of high speed drivers are designed to provide drive waveforms for complementary switches. Complementary switch configurations are commonly used in synchronous rectification circuits and active clamp/reset circuits, which provide zero voltage switching. In order to facilitate the soft switching transitions, independently programmable delays between the two output waveforms are provided on these drivers. The delay pins also have true-zero voltage-sensing capability which allows immediate activation of the corresponding switch when zero voltage is applied. These devices require a PWM-type input to operate and interface with commonly available PWM controllers.

In the UC1714 series, the AUX output is inverted to allow driving a p-channel MOSFET. In the UC1715 series, the two outputs are configured in a true complementary fashion.

These two families of high speed drivers are designed to provide drive waveforms for complementary switches. Complementary switch configurations are commonly used in synchronous rectification circuits and active clamp/reset circuits, which provide zero voltage switching. In order to facilitate the soft switching transitions, independently programmable delays between the two output waveforms are provided on these drivers. The delay pins also have true-zero voltage-sensing capability which allows immediate activation of the corresponding switch when zero voltage is applied. These devices require a PWM-type input to operate and interface with commonly available PWM controllers.

In the UC1714 series, the AUX output is inverted to allow driving a p-channel MOSFET. In the UC1715 series, the two outputs are configured in a true complementary fashion.

filter

查找其他低侧驱动器

下载