主页 接口 HDMI、DisplayPort 和 MIPI IC
主页
接口
HDMI、DisplayPort 和 MIPI IC

TVP5150A

不推荐用于新设计

具有强大可靠的同步检测器的超低功率 NTSC/PAL/SECAM 视频解码器

立即订购
数据表
TVP5150A 不推荐用于新设计
虽然我们会继续生产此产品供先前的设计使用，但不推荐在新设计中使用此产品。请考虑从这些替代产品中选择一款：
open-in-new 比较替代产品
功能优于比较器件，可直接替换
TVP5150AM1 正在供货 具有强大可靠的同步检测器的超低功率 NTSC/PAL/SECAM 视频解码器 This device is an updated revision.

TVP5150A

不推荐用于新设计
数据表 立即订购

产品详情

Rating Catalog Supply voltage (V) 1.8, 3.3 Operating temperature range (°C) 0 to 70
Rating Catalog Supply voltage (V) 1.8, 3.3 Operating temperature range (°C) 0 to 70
TQFP (PBS) 32 49 mm² 7 x 7
  • Accepts NTSC (M, 4.43), PAL (B, D, G, H, I, M, N), and SECAM (B, D, G, K, K1, L) video data
  • Supports ITU-R BT.601 standard sampling
  • High-speed 9-bit ADC
  • Two composite inputs or one S-video input
  • Fully differential CMOS analog preprocessing channels with clamping and automatic gain control (AGC) for best signal-to-noise (S/N) performance
  • Ultralow power consumption: 115 mW typical
  • 32-pin TQFP package
  • Power-down mode: <1 mW
  • Brightness, contrast, saturation, hue, and sharpness control through I2C
  • Complementary 4-line (3-H delay) adaptive comb filters for both cross-luminance and cross-chrominance noise reduction
  • Patented architecture for locking to weak, noisy, or unstable signals
  • Single 14.31818-MHz crystal for all standards
  • Internal phase-locked loop (PLL) for line-locked clock and sampling
  • Subcarrier Genlock output for synchronizing color subcarrier of external encoder
  • Standard programmable video output format:
    • ITU-R BT.656, 8-bit 4:2:2 with embedded syncs
    • 8-bit 4:2:2 with discrete syncs
  • Macrovision™ copy protection detection
  • Advanced programmable video output formats:
    • 2x oversampled raw VBI data during active video
    • Sliced VBI data during horizontal blanking or active video
  • VBI modes supported
    • Teletext (NABTS, WST)
    • Closed-caption decode with FIFO, and extended data services (EDS)
    • Wide screen signaling, video program system, CGMS, vertical interval tme code
    • Gemstar 1x/2x electronic program guide compatible mode
    • Custom configuration mode that allows the user to program the slice engine for unique VBI data signals
  • Power-on reset
  • Applications:
    The following is a partial list of suggested applications:
    • Digital television
    • PDA
    • Notebook PCs
    • Cell phones
    • Video recorder/players
    • Internet appliances/web pads
    • Handheld games

Macrovision is a trademark of Macrovision Corporation.
Other trademarks are the property of their respective owners.
  • Accepts NTSC (M, 4.43), PAL (B, D, G, H, I, M, N), and SECAM (B, D, G, K, K1, L) video data
  • Supports ITU-R BT.601 standard sampling
  • High-speed 9-bit ADC
  • Two composite inputs or one S-video input
  • Fully differential CMOS analog preprocessing channels with clamping and automatic gain control (AGC) for best signal-to-noise (S/N) performance
  • Ultralow power consumption: 115 mW typical
  • 32-pin TQFP package
  • Power-down mode: <1 mW
  • Brightness, contrast, saturation, hue, and sharpness control through I2C
  • Complementary 4-line (3-H delay) adaptive comb filters for both cross-luminance and cross-chrominance noise reduction
  • Patented architecture for locking to weak, noisy, or unstable signals
  • Single 14.31818-MHz crystal for all standards
  • Internal phase-locked loop (PLL) for line-locked clock and sampling
  • Subcarrier Genlock output for synchronizing color subcarrier of external encoder
  • Standard programmable video output format:
    • ITU-R BT.656, 8-bit 4:2:2 with embedded syncs
    • 8-bit 4:2:2 with discrete syncs
  • Macrovision™ copy protection detection
  • Advanced programmable video output formats:
    • 2x oversampled raw VBI data during active video
    • Sliced VBI data during horizontal blanking or active video
  • VBI modes supported
    • Teletext (NABTS, WST)
    • Closed-caption decode with FIFO, and extended data services (EDS)
    • Wide screen signaling, video program system, CGMS, vertical interval tme code
    • Gemstar 1x/2x electronic program guide compatible mode
    • Custom configuration mode that allows the user to program the slice engine for unique VBI data signals
  • Power-on reset
  • Applications:
    The following is a partial list of suggested applications:
    • Digital television
    • PDA
    • Notebook PCs
    • Cell phones
    • Video recorder/players
    • Internet appliances/web pads
    • Handheld games

Macrovision is a trademark of Macrovision Corporation.
Other trademarks are the property of their respective owners.

The TVP5150A device is an ultralow power NTSC/PAL/SECAM video decoder. Available in a space saving 32-pin TQFP package, the TVP5150A decoder converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5150A decoder allows for ultralow-power consumption. The decoder consumes 115 mW of power in typical operation and consumes less than 1 mW in power-down mode, considerably increasing battery life in portable applications. The decoder uses just one crystal for all supported standards. The TVP5150A decoder can be programmed using an I2C serial interface. The decoder uses a 1.8-V supply for its analog and digital supplies, and a 3.3-V supply for its I/O.

The TVP5150A decoder converts baseband analog video into digital YCbCr 4:2:2 component video. Composite and S-video inputs are supported. The TVP5150A decoder includes one 9-bit analog-to-digital converter (ADC) with 2x sampling. Sampling is ITU-R BT.601 (27.0 MHz, generated from the 14.31818-MHz crystal or oscillator input) and is line-locked. The output formats can be 8-bit 4:2:2 or 8-bit ITU-R BT.656 with embedded synchronization.

The TVP5150A decoder utilizes Texas Instruments patented technology for locking to weak, noisy, or unstable signals. A Genlock/real-time control (RTC) output is generated for synchronizing downstream video encoders.

Complementary 4-line adaptive comb filtering is available for both the luma and chroma data paths to reduce both cross-luma and cross-chroma artifacts; a chroma trap filter is also available.

Video characteristics including hue, contrast, brightness, saturation, and sharpness may be programmed using the industry standard I2C serial interface. The TVP5150A decoder generates synchronization, blanking, lock, and clock signals in addition to digital video outputs. The TVP5150A decoder includes methods for advanced vertical blanking interval (VBI) data retrieval. The VBI data processor slices, parses, and performs error checking on teletext, closed caption, and other data in several formats.

The TVP5150A decoder detects copy-protected input signals according to the Macrovision™ standard and detects Type 1, 2, 3, and colorstripe pulses.

The main blocks of the TVP5150A decoder include:

  • Robust sync detector
  • ADC with analog processor
  • Y/C separation using 4-line adaptive comb filter
  • Chrominance processor
  • Luminance processor
  • Video clock/timing processor and power-down control
  • Output formatter
  • I2C interface
  • VBI data processor
  • Macrovision™ detection for composite and S-video

The TVP5150A device is an ultralow power NTSC/PAL/SECAM video decoder. Available in a space saving 32-pin TQFP package, the TVP5150A decoder converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5150A decoder allows for ultralow-power consumption. The decoder consumes 115 mW of power in typical operation and consumes less than 1 mW in power-down mode, considerably increasing battery life in portable applications. The decoder uses just one crystal for all supported standards. The TVP5150A decoder can be programmed using an I2C serial interface. The decoder uses a 1.8-V supply for its analog and digital supplies, and a 3.3-V supply for its I/O.

The TVP5150A decoder converts baseband analog video into digital YCbCr 4:2:2 component video. Composite and S-video inputs are supported. The TVP5150A decoder includes one 9-bit analog-to-digital converter (ADC) with 2x sampling. Sampling is ITU-R BT.601 (27.0 MHz, generated from the 14.31818-MHz crystal or oscillator input) and is line-locked. The output formats can be 8-bit 4:2:2 or 8-bit ITU-R BT.656 with embedded synchronization.

The TVP5150A decoder utilizes Texas Instruments patented technology for locking to weak, noisy, or unstable signals. A Genlock/real-time control (RTC) output is generated for synchronizing downstream video encoders.

Complementary 4-line adaptive comb filtering is available for both the luma and chroma data paths to reduce both cross-luma and cross-chroma artifacts; a chroma trap filter is also available.

Video characteristics including hue, contrast, brightness, saturation, and sharpness may be programmed using the industry standard I2C serial interface. The TVP5150A decoder generates synchronization, blanking, lock, and clock signals in addition to digital video outputs. The TVP5150A decoder includes methods for advanced vertical blanking interval (VBI) data retrieval. The VBI data processor slices, parses, and performs error checking on teletext, closed caption, and other data in several formats.

The TVP5150A decoder detects copy-protected input signals according to the Macrovision™ standard and detects Type 1, 2, 3, and colorstripe pulses.

The main blocks of the TVP5150A decoder include:

  • Robust sync detector
  • ADC with analog processor
  • Y/C separation using 4-line adaptive comb filter
  • Chrominance processor
  • Luminance processor
  • Video clock/timing processor and power-down control
  • Output formatter
  • I2C interface
  • VBI data processor
  • Macrovision™ detection for composite and S-video
open-in-new 查找其他 HDMI、DisplayPort 和 MIPI IC
下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 8
类型 标题 下载最新的英语版本 日期
* 数据表 Ultralow Power NTSC/PAL/SECAM Video Decoder w/Robust Sync Detector 数据表 2003年 11月 3日
用户指南 TVP5150A: Quick Start Guide 2003年 11月 11日
应用手册 TVP5150A FAQ 2003年 10月 17日
应用手册 TVP51xx Product Family - FAQ 2003年 10月 17日
应用手册 TVP5146 and TVP5150A VBI Raw Data Mode 2003年 10月 15日
应用手册 TVP5150A VBI Quick Start 2003年 10月 15日
更多文献资料 TVP5150AEVM Quick Start Guide 2003年 9月 15日
EVM 用户指南 TVP5150AEVM User's Guide 2003年 9月 15日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

模拟工具

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在 PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
发送申请
模拟工具

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表 

需要 HSpice (...)

用户指南: PDF
英语版 (Rev.A): PDF
查看选项
封装 引脚 下载
TQFP (PBS) 32 查看选项
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

支持和培训

视频