TPS6734

正在供货

固定 12V 120MA 升压转换器电源

可提供此产品的更新版本

open-in-new 比较替代产品
该产品会持续为现有客户提供。新设计应考虑替代产品。
功能与比较器件相同,但引脚排列有所不同
TPS61089 正在供货 采用 2.0mm x 2.5mm VQFN 封装的 12.6V、7A 全集成同步升压转换器 Wider operating range, smaller solution size and higher efficiency and lower quiescent current

产品详情

Rating Catalog Operating temperature range (°C) -40 to 85 Topology Boost Type Converter Vin (min) (V) 2.7 Vin (max) (V) 12 Switching frequency (min) (kHz) 170 Switching frequency (max) (kHz) 170 Features Enable Vout (min) (V) 12 Vout (max) (V) 12 Iq (typ) (µA) 1200 Duty cycle (max) (%) 100 Switch current limit (typ) (A) 1.5
Rating Catalog Operating temperature range (°C) -40 to 85 Topology Boost Type Converter Vin (min) (V) 2.7 Vin (max) (V) 12 Switching frequency (min) (kHz) 170 Switching frequency (max) (kHz) 170 Features Enable Vout (min) (V) 12 Vout (max) (V) 12 Iq (typ) (µA) 1200 Duty cycle (max) (%) 100 Switch current limit (typ) (A) 1.5
PDIP (P) 8 92.5083 mm² 9.81 x 9.43 SOIC (D) 8 29.4 mm² 4.9 x 6
  • Pin-for-Pin Compatible With MAX734
  • Programming Voltage for Flash Memory
  • 2.7-V to 11-V Input Operating Range
  • Output Current of 120 mA or Greater From 3.75-V or Higher Input
  • 3-uA Maximum Supply Current in Shutdown
  • Only 5 External Components Required
  • High Efficiency...85% Typical (5-V Input, 120-mA Output)
  • 8-Pin SOIC and DIP Packages
  • - 40°C to 85°C Free-Air Operating Temperature Range
  • Pin-for-Pin Compatible With MAX734
  • Programming Voltage for Flash Memory
  • 2.7-V to 11-V Input Operating Range
  • Output Current of 120 mA or Greater From 3.75-V or Higher Input
  • 3-uA Maximum Supply Current in Shutdown
  • Only 5 External Components Required
  • High Efficiency...85% Typical (5-V Input, 120-mA Output)
  • 8-Pin SOIC and DIP Packages
  • - 40°C to 85°C Free-Air Operating Temperature Range

The TPS6734 is a fixed 12-V output boost converter capable of delivering 120 mA from inputs as low as
3.75 V. The device is pin-for-pin compatible with the MAX734 regulator and offers the following advantages: lower supply current, wider operating input-voltage range, and higher output currents. As shown in Figure 1, the only external components required are: an inductor, a Schottky rectifier, an output filter capacitor, an input filter capacitor, and a small capacitor for loop compensation. The entire converter occupies less than 0.7 in2 of PCB space when implemented with surface-mount components. An enable input is provided to shut down the converter and reduce the supply current to 3 uA when 12 V is not needed.

The TPS6734 is a 170-kHz current-mode PWM ( pulse-width modulation) controller with an n-channel MOSFET power switch. Gate drive for the switch is derived from the 12-V output after start-up to minimize the die area needed to realize the 0.7- MOSFET and improve efficiency at input voltages below 5 V. Soft start is accomplished with the addition of one small capacitor. A 1.22-V reference (pin 2) is brought out for external use.

High efficiency at low supply voltages and low supply current in shutdown make the TPS6734 particularly attractive for flash memory programming supplies, PCMCIA cards, and operational amplifiers in battery-powered equipment. The TPS6734 is available in 8-pin DIP and SOIC packages and operates over a free-air temperature range of -40°C to 85°C.


Figure 1. Typical Operating Circuit

The D package is available taped and reeled. Add the suffix R
to the device type (e.g., TPS6734IDR).

The TPS6734 is a fixed 12-V output boost converter capable of delivering 120 mA from inputs as low as
3.75 V. The device is pin-for-pin compatible with the MAX734 regulator and offers the following advantages: lower supply current, wider operating input-voltage range, and higher output currents. As shown in Figure 1, the only external components required are: an inductor, a Schottky rectifier, an output filter capacitor, an input filter capacitor, and a small capacitor for loop compensation. The entire converter occupies less than 0.7 in2 of PCB space when implemented with surface-mount components. An enable input is provided to shut down the converter and reduce the supply current to 3 uA when 12 V is not needed.

The TPS6734 is a 170-kHz current-mode PWM ( pulse-width modulation) controller with an n-channel MOSFET power switch. Gate drive for the switch is derived from the 12-V output after start-up to minimize the die area needed to realize the 0.7- MOSFET and improve efficiency at input voltages below 5 V. Soft start is accomplished with the addition of one small capacitor. A 1.22-V reference (pin 2) is brought out for external use.

High efficiency at low supply voltages and low supply current in shutdown make the TPS6734 particularly attractive for flash memory programming supplies, PCMCIA cards, and operational amplifiers in battery-powered equipment. The TPS6734 is available in 8-pin DIP and SOIC packages and operates over a free-air temperature range of -40°C to 85°C.


Figure 1. Typical Operating Circuit

The D package is available taped and reeled. Add the suffix R
to the device type (e.g., TPS6734IDR).

下载

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 1
类型 标题 下载最新的英语版本 日期
* 数据表 Fixed 12-V 120-mA Boost-Converter Supply 数据表 (Rev. A) 1999年 1月 19日

订购和质量

包含信息:
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息:
  • 制造厂地点
  • 封装厂地点

支持和培训

视频