主页 电源管理 LED 驱动器 RGB LED 驱动器
主页
电源管理
LED 驱动器
RGB LED 驱动器

LP5520

正在供货

RGB 背光 LED 驱动器

立即订购
数据表

LP5520

正在供货
数据表 立即订购

产品详情

Number of channels 3 LED current per channel (mA) 60 LED configuration Parallel, Series Program memory No Topology Boost Programmable ramp control No Vin (min) (V) 2.9 Vin (max) (V) 5.5 Iout (max) (A) 0.18 Features Analog/PWM mixed dimming, Constant current, Current control, I2C control Iq (typ) (mA) 0.9 Shutdown current (ISD) (typ) (µA) 1 Operating temperature range (°C) -30 to 85 Rating Catalog
Number of channels 3 LED current per channel (mA) 60 LED configuration Parallel, Series Program memory No Topology Boost Programmable ramp control No Vin (min) (V) 2.9 Vin (max) (V) 5.5 Iout (max) (A) 0.18 Features Analog/PWM mixed dimming, Constant current, Current control, I2C control Iq (typ) (mA) 0.9 Shutdown current (ISD) (typ) (µA) 1 Operating temperature range (°C) -30 to 85 Rating Catalog
DSBGA (YZR) 25 7.5625 mm² 2.75 x 2.75
  • Temperature Compensated LED Intensity and Color
  • Individual Calibration Coefficients for Each Color
  • Color Accuracy ΔX and ΔY ≤ 0.003
  • 12-Bit ADC for Measurement of 2 Sensors
  • Adjustable Current Outputs for Red, Green, and Blue (RGB) LED
  • 0.2% Typical LED Output Current Matching
  • PWM Control Inputs for Each Color
  • SPI and I2C-Compatible Interface
  • Stand-Alone Mode With One-Wire Control
  • Sequential Mode for One Color at a Time
  • Magnetic High Efficiency Boost Converter
  • Programmable Output Voltage from 5 V to 20 V
  • Adaptive Output Voltage Control Option
  • < 2-µA Typical Shutdown Current
  • Temperature Compensated LED Intensity and Color
  • Individual Calibration Coefficients for Each Color
  • Color Accuracy ΔX and ΔY ≤ 0.003
  • 12-Bit ADC for Measurement of 2 Sensors
  • Adjustable Current Outputs for Red, Green, and Blue (RGB) LED
  • 0.2% Typical LED Output Current Matching
  • PWM Control Inputs for Each Color
  • SPI and I2C-Compatible Interface
  • Stand-Alone Mode With One-Wire Control
  • Sequential Mode for One Color at a Time
  • Magnetic High Efficiency Boost Converter
  • Programmable Output Voltage from 5 V to 20 V
  • Adaptive Output Voltage Control Option
  • < 2-µA Typical Shutdown Current

The LP5520 is an RGB backlight LED driver for small format color LCDs. RGB backlights enable better colors on the display and power savings compared with white LED backlights. The device offers a small and simple driver solution without need for optical feedback. Calibration in display module production can be done in one temperature. The LP5520 produces true white light over a wide temperature range. Three independent LED drivers have accurate programmable current sinks and PWM modulation control. Using internal calibration memory and external temperature sensor, the RGB LED currents are adjusted for perfect white balance independent of the brightness setting or temperature. The user programmable calibration memory has intensity vs temperature data for each color. This white balance calibration data can be programmed to the memory on the production line of a backlight module.

The device has a magnetic boost converter that creates a supply voltage of up to 20 V LED from the battery voltage. The output can be set at 1-V steps from 5 V to 20 V. In adaptive mode the circuit automatically adjusts the output voltage to minimum sufficient level for lowest power consumption. Temperature is measured using an external temperature sensor placed close to the LEDs. The second ADC input can be used, for example, for ambient light measurement.

For all available packages, see the orderable addendum at the end of the data sheet.

The LP5520 is an RGB backlight LED driver for small format color LCDs. RGB backlights enable better colors on the display and power savings compared with white LED backlights. The device offers a small and simple driver solution without need for optical feedback. Calibration in display module production can be done in one temperature. The LP5520 produces true white light over a wide temperature range. Three independent LED drivers have accurate programmable current sinks and PWM modulation control. Using internal calibration memory and external temperature sensor, the RGB LED currents are adjusted for perfect white balance independent of the brightness setting or temperature. The user programmable calibration memory has intensity vs temperature data for each color. This white balance calibration data can be programmed to the memory on the production line of a backlight module.

The device has a magnetic boost converter that creates a supply voltage of up to 20 V LED from the battery voltage. The output can be set at 1-V steps from 5 V to 20 V. In adaptive mode the circuit automatically adjusts the output voltage to minimum sufficient level for lowest power consumption. Temperature is measured using an external temperature sensor placed close to the LEDs. The second ADC input can be used, for example, for ambient light measurement.

For all available packages, see the orderable addendum at the end of the data sheet.
open-in-new 查找其他 RGB LED 驱动器
下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 4
类型 标题 下载最新的英语版本 日期
* 数据表 LP5520 RGB Backlight LED Driver 数据表 (Rev. B) PDF | HTML 2016年 3月 17日
白皮书 常见 LED 功能和 LED 驱动器设计注意事项 英语版 2020年 9月 21日
应用手册 How to Select a RGB LED Driver 2019年 8月 8日
应用手册 具备颜色管理功能的发光二极管驱动器：前景一片璀璨 英语版 2007年 6月 20日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

模拟工具

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在 PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
发送申请
封装 引脚 下载
DSBGA (YZR) 25 查看选项
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

视频