Home Power management AC/DC & DC/DC converters (integrated FET)
Home
Power management
AC/DC & DC/DC converters (integrated FET)

TPS63901

ACTIVE

5.5-V buck-boost converter with 75-nA operating IQ in WCSP package

Order now
Data sheet

TPS63901

ACTIVE
Data sheet Order now

Product details

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck-Boost Type Converter Vin (min) (V) 1.8 Vin (max) (V) 5.5 Switching frequency (min) (kHz) 0.004 Switching frequency (max) (kHz) 2000 Features Adjustable current limit, Dynamic Voltage Scaling, Enable, Light Load Efficiency, Pre-Bias Start-Up, Synchronous Rectification, UVLO Fixed Vout (min) (V) 1.8 Vout (max) (V) 5 Iq (typ) (µA) 0.075 Duty cycle (max) (%) 99
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck-Boost Type Converter Vin (min) (V) 1.8 Vin (max) (V) 5.5 Switching frequency (min) (kHz) 0.004 Switching frequency (max) (kHz) 2000 Features Adjustable current limit, Dynamic Voltage Scaling, Enable, Light Load Efficiency, Pre-Bias Start-Up, Synchronous Rectification, UVLO Fixed Vout (min) (V) 1.8 Vout (max) (V) 5 Iq (typ) (µA) 0.075 Duty cycle (max) (%) 99
DSBGA (YCJ) 12 1.471168 mm² 1.448 x 1.016
  • 1.8-V to 5.5-V input voltage range
  • 1.8-V to 5-V output voltage range (100-mV steps)
    • Programmable with external resistors
    • SEL pin to toggle between two output voltage presets
  • > 400-mA output current for VI ≥ 2.0 V, VO = 3.3 V
    • Stackable: parallel multiple devices for higher output current
  • > 90% efficiency at 10-µA load current
    • 75-nA quiescent current
    • 60-nA shutdown current
  • Single-mode operation
    • Eliminates mode transitions between buck, buck-boost and boost operation
    • Low output ripple
    • Excellent transient performance
  • Robust operation features
    • Integrated soft start
    • Programmable input current limit with eight settings (1 mA to 100 mA and unlimited)
    • Output short-circuit and overtemperature protection
  • Tiny solution size
    • Small 2.2-µH inductor, single 22-µF output capacitor
    • 12-ball, 1.5-mm × 1.15-mm, 0.35-mm pitch WCSP package
  • 1.8-V to 5.5-V input voltage range
  • 1.8-V to 5-V output voltage range (100-mV steps)
    • Programmable with external resistors
    • SEL pin to toggle between two output voltage presets
  • > 400-mA output current for VI ≥ 2.0 V, VO = 3.3 V
    • Stackable: parallel multiple devices for higher output current
  • > 90% efficiency at 10-µA load current
    • 75-nA quiescent current
    • 60-nA shutdown current
  • Single-mode operation
    • Eliminates mode transitions between buck, buck-boost and boost operation
    • Low output ripple
    • Excellent transient performance
  • Robust operation features
    • Integrated soft start
    • Programmable input current limit with eight settings (1 mA to 100 mA and unlimited)
    • Output short-circuit and overtemperature protection
  • Tiny solution size
    • Small 2.2-µH inductor, single 22-µF output capacitor
    • 12-ball, 1.5-mm × 1.15-mm, 0.35-mm pitch WCSP package

The TPS63901 device is a high-efficiency synchronous buck-boost converter with an extremely low quiescent current (75 nA typical). The device has 32 user-programmable output voltage settings from 1.8 V to 5 V.

A dynamic voltage-scaling feature lets applications switch between two output voltages during operation; for example, to save power by using a lower system supply voltage during standby operation.

With its wide supply voltage range and programmable input current limit (1 mA to 100 mA and unlimited), the device is ideal for use with a wide range of primary like 3S Alkaline, 1S Li-MnO2 or 1S Li-SOCl2, and secondary battery types.

The high-output current capability supports commonly-used RF standards like sub-1-GHz, BLE, LoRa, wM-Bus, and NB-IoT.

The TPS63901 device is a high-efficiency synchronous buck-boost converter with an extremely low quiescent current (75 nA typical). The device has 32 user-programmable output voltage settings from 1.8 V to 5 V.

A dynamic voltage-scaling feature lets applications switch between two output voltages during operation; for example, to save power by using a lower system supply voltage during standby operation.

With its wide supply voltage range and programmable input current limit (1 mA to 100 mA and unlimited), the device is ideal for use with a wide range of primary like 3S Alkaline, 1S Li-MnO2 or 1S Li-SOCl2, and secondary battery types.

The high-output current capability supports commonly-used RF standards like sub-1-GHz, BLE, LoRa, wM-Bus, and NB-IoT.
filter Find other AC/DC & DC/DC converters (integrated FET)
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Same functionality with different pin-out to the compared device
TPS63802 ACTIVE 2-A, high-efficient, 11-µA quiescent current buck-boost converter in QFN/DFN package Higher Iout replacement with VSON-10 package
TPS63807 ACTIVE 2A,11-uA quiescent current buck-boost converter Higher Iout replacement
TPS63810 ACTIVE 2.5-A high-efficient buck-boost converter with I²C interface for dynamic voltage scaling I2C bus control
TPS63900 ACTIVE 1.8-V to 5.5-V, 75-nA IQ buck-boost converter with input current limit and Dynamic Voltage Scaling Different package with WSON-10

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 11
Type Title Date
* Data sheet TPS63901 1.8-V to 5.5-V, 75-nA IQ Buck-Boost Converter with Input Current Limit and DVS in a WCSP Package datasheet (Rev. A) PDF | HTML 17 Jun 2022
White paper Understanding Functional Safety FIT Base Failure Rate Estimates per IEC 62380 and SN 29500 (Rev. A) PDF | HTML 30 Apr 2024
User guide TPS63901 Evaluation Module User's Guide PDF | HTML 24 Nov 2021
Certificate TPS63901EVM EU RoHS Declaration of Conformity (DoC) 23 Nov 2021
Application note Layer Design for Reducing Radiated EMI of DC to DC Buck-Boost Converters (Rev. A) PDF | HTML 09 Jun 2021
Application brief 75-nA IQ Buck-Boost Converter in Parallel for Increased Output Current (≥ 2 A) 14 Oct 2020
Application note Extending Battery Life with Low-Iq and Dynamic Voltage Scaling (Rev. A) PDF | HTML 12 Oct 2020
Technical article 5 best practices to extend battery life in flow meters PDF | HTML 28 Aug 2020
Application brief How to Extend Operating Time of a LiSOCl2 Powered System PDF | HTML 06 Aug 2020
Application brief How to Implement Multi-Level Dynamic Voltage Scaling With TPS63900 PDF | HTML 06 Aug 2020
Application brief Using Input Current Limiting to Extend Battery Life 28 Apr 2020

Design & development

Please view the Design & development section on a desktop.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos