SPRZ193T January   2003  – December 2023 SM320F2812 , SM320F2812-EP , SMJ320F2812 , TMS320F2810 , TMS320F2810-Q1 , TMS320F2811 , TMS320F2811-Q1 , TMS320F2812 , TMS320F2812-Q1

 

  1.   1
  2. 1Introduction
  3. 2Device and Development Tool Support Nomenclature
  4. 3Device Markings
  5. 4Usage Notes and Known Design Exceptions to Functional Specifications
    1. 4.1 Usage Notes
      1. 4.1.1 PIE: Spurious Nested Interrupt After Back-to-Back PIEACK Write and Manual CPU Interrupt Mask Clear Usage Note
  6. 5Known Design Exceptions to Functional Specifications
    1.     Advisory
    2.     Advisory
    3.     Advisory
    4.     Advisory
    5.     Advisory
    6.     Advisory
    7.     Advisory
    8.     Advisory
    9.     Advisory
    10.     Advisory
    11.     Advisory
    12.     Advisory
    13.     Advisory
    14.     Advisory
    15.     Advisory
    16.     Advisory
    17.     Advisory
    18.     Advisory
    19.     Advisory
    20.     Advisory
    21.     Advisory
    22.     Advisory
    23.     Advisory
    24.     Advisory
    25.     Advisory
    26.     Advisory
    27.     Advisory
    28.     Advisory
    29.     Advisory
    30.     Advisory
    31.     Advisory
  7. 6Documentation Support
  8. 7Trademarks
  9. 8Revision History

Device and Development Tool Support Nomenclature

To designate the stages in the product development cycle, TI assigns prefixes to the part numbers of all [TMS320] DSP devices and support tools. Each TMS320™ DSP commercial family member has one of three prefixes: TMX, TMP, or TMS (for example, TMS320F2812). Texas Instruments recommends two of three possible prefix designators for its support tools: TMDX and TMDS. These prefixes represent evolutionary stages of product development from engineering prototypes (TMX/TMDX) through fully qualified production devices/tools (TMS/TMDS).

TMX Experimental device that is not necessarily representative of the final device's electrical specifications
TMP Final silicon die that conforms to the device's electrical specifications but has not completed quality and reliability verification
TMS Fully qualified production device

Support tool development evolutionary flow:

TMDX Development-support product that has not yet completed Texas Instruments internal qualification testing
TMDS Fully qualified development-support product

TMX and TMP devices and TMDX development-support tools are shipped against the following disclaimer:
"Developmental product is intended for internal evaluation purposes."

TMS devices and TMDS development-support tools have been characterized fully, and the quality and reliability of the device have been demonstrated fully. TI's standard warranty applies.

Predictions show that prototype devices (TMX or TMP) have a greater failure rate than the standard production devices. Texas Instruments recommends that these devices not be used in any production system because their expected end-use failure rate still is undefined. Only qualified production devices are to be used.

TI device nomenclature also includes a suffix with the device family name. This suffix indicates the package type (for example, GHH) and temperature range (for example, A).