SLUS659G FEBRUARY   2006  – November 2014 TPS40200

PRODUCTION DATA.  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Pin Configuration and Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 Handling Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Typical Characteristics
  7. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 MOSFET Gate Drive
      2. 7.3.2 Undervoltage Lockout Protection
      3. 7.3.3 Selecting the Operating Frequency
      4. 7.3.4 Synchronizing the Oscillator
      5. 7.3.5 Current Limit Resistor Selection
      6. 7.3.6 Calculating the Soft-Start Time
      7. 7.3.7 Voltage Setting and Modulator Gain
    4. 7.4 Device Functional Modes
      1. 7.4.1 Operation Near Minimum Input Voltage
      2. 7.4.2 Operation With SS Pin
  8. Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Buck Regulator, 8 V to 12 V Input, 3.3 V to 5.0 V at 2.5-A Output
        1. 8.2.1.1 Design Requirements
        2. 8.2.1.2 Detailed Design Procedure
          1. 8.2.1.2.1 FET Selection Criteria
          2. 8.2.1.2.2 Rectifier Selection Criteria
          3. 8.2.1.2.3 Inductor Selection Criteria
          4. 8.2.1.2.4 Output Capacitance
          5. 8.2.1.2.5 Switching Frequency
          6. 8.2.1.2.6 Calculating the Overcurrent Threshold Level
          7. 8.2.1.2.7 Soft-Start Capacitor
          8. 8.2.1.2.8 Frequency Compensation
            1. 8.2.1.2.8.1 Step 1
            2. 8.2.1.2.8.2 Step 2
            3. 8.2.1.2.8.3 Step 3
            4. 8.2.1.2.8.4 Step 4
            5. 8.2.1.2.8.5 Step 5
          9. 8.2.1.2.9 Printed Circuit Board Plots
        3. 8.2.1.3 Application Curves
      2. 8.2.2 18 V - 50 V Input, 16 V at 1-A Output
        1. 8.2.2.1 Design Requirements
        2. 8.2.2.2 Detailed Design Procedures
        3. 8.2.2.3 Application Curves
      3. 8.2.3 Wide Input Voltage Led Constant Current Driver
        1. 8.2.3.1 Design Requirements
        2. 8.2.3.2 Detailed Design Procedures
        3. 8.2.3.3 Application Curve
  9. Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Device Support
      1. 11.1.1 Related Products
      2. 11.1.2 Third-Party Products Disclaimer
    2. 11.2 Documentation Support
      1. 11.2.1 Related Documentation
    3. 11.3 Trademarks
    4. 11.4 Electrostatic Discharge Caution
    5. 11.5 Glossary
  12. 12Mechanical, Packaging, and Orderable Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • D|8
  • DRB|8
散热焊盘机械数据 (封装 | 引脚)
订购信息

6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted) (1)
MIN MAX UNIT
Input voltage range VDD , ISNS –0.3 52 V
RC, FB –0.3 5.5
SS –0.3 9.0
Output voltage range COMP –0.3 9.0 V
GDRV VIN –10 VIN
TJ Operating Junction Temperature –40 125 °C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

6.2 Handling Ratings

MIN MAX UNIT
Tstg Storage temperature range –55 150 °C
V(ESD) Electrostatic discharge Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins(1) –1500 1500 V
Charged device model (CDM), per JEDEC specification JESD22-C101, all pins(2) –1500 1500
(1) JEDEC document JEP155 states that 500 V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250 V CDM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
VDD Input voltage 4.5 52 V
TJ Operating temperature range –40 125 °C

6.4 Thermal Information

THERMAL METRIC(1) D DRB UNIT
SOIC VSON
(8 PINS) (8 PINS)
RθJA Junction-to-ambient thermal resistance 109.6 44.2 °C/W
RθJC(top) Junction-to-case (top) thermal resistance 54.0 53.6
RθJB Junction-to-board thermal resistance 49.6 19.8
ψJT Junction-to-top characterization parameter 11.2 1.1
ψJB Junction-to-board characterization parameter 49.1 19.9
RθJC(bot) Junction-to-case (bottom) thermal resistance N/A 7.9
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.

6.5 Electrical Characteristics

–40°C < TA = TJ < 85°C, VDD = 12 V, fOSC = 100 kHz (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
VOLTAGE REFERENCE
VFB Feedback voltage COMP = FB, TA = 25°C 689 696 702 mV
4.5 < VDD < 52 TA = 25°C 686 696 703
–40°C < TA < 85°C 679 696 708
–40°C < TA < 125°C 679 696 710
GATE DRIVER
Isrc Gate driver pull-up current 125 300 mA
Isnk Gate driver pull-down current 200 300 mA
VGATE Gate driver output voltage VGATE = (VDD – VGDRV), for 12 < VDD < 52 6 8 10 V
QUIESCENT CURRENT
Iqq Device quiescent current fOSC = 300 kHz, Driver not switching, 4.5 < VDD < 52 1.5 3.0 mA
UNDERVOLTAGE LOCKOUT (UVLO)
VUVLO(on) Turn-on threshold –40°C < TA < 125°C 3.8 4.25 4.5 V
VUVLO(off) Turn-off threshold 4.05
VUVLO(HYST) Hysteresis 110 200 275 mV
SOFT-START
RSS(chg) Internal soft-start pull-up resistance 65 105 170
RSS(dchg) Internal soft-start pull-down resistance 190 305 485
VSSRST Soft-start reset threshold 100 150 200 mV
OVERCURRENT PROTECTION
VILIM Overcurrent threshold 4.5 < VDD < 52 0°C < TA < 125°C 65 100 140 mV
–40°C < TA < 125°C 55 100 140
OCDF Overcurrent duty cycle(1)   2%
VILIM(rst) Overcurrent reset threshold 100 150 200 mV
OSCILLATOR
fOSC Oscillator frequency range(1) 35 500 kHz
Oscillator frequency RRC = 200 kΩ, CRC = 470 pF 85 100 115
RRC = 68.1 kΩ, CRC = 470 pF 255 300 345
Frequency line regulation 12 V < VDD < 52 V -9% 0%
4.5 V < VDD < 12 V –20% 0%
VRMP Ramp amplitude 4.5 V < VDD < 52 V VDD÷10 V
PULSE WIDTH MODULATOR
tMIN Minimum controllable pulse width(2) VDD = 12 V 200 400 ns
VDD = 30 V 100 200
DMAX Maximum duty cycle fosc = 100 kHz, CL = 470 pF 93% 95%
fosc = 300 kHz, CL = 470 pF 90% 93%
KPWM Modulator and power stage DC gain 8 10 12 V/V
ERROR AMPLIFIER
IIB Input bias current 100 250 nA
AOL Open loop gain(1) 60 80 dB
GBWP Unity gain bandwidth(1) 1.5 3 MHz
ICOMP(src) Output source current VFB = 0.6 V, COMP = 1 V 100 250 μA
ICOMP(snk) Output sink current VFB = 1.2 V, COMP = 1 V 1.0 2.5 mA
(1) Ensured by design. Not production tested.
(2) See Figure 21 for for tMIN vs fOSC at various input voltages.

6.6 Typical Characteristics

icc_temp_lus659.gif
Figure 1. Quiescent Current vs Temperature
ssrt_temp.gif
Figure 3. Soft-Start Threshold vs Temperature
oscaf_temp_lus659.gif
Figure 5. Oscillator Frequency vs Temperature
oscf_vdd_lus659.gif
Figure 7. Oscillator Frequency vs VDD
gpwr_temp4512_lus659.gif
Figure 9. Power Stage Gain vs Temperature
vramp_temp_lus659.gif
Figure 11. Modulator Ramp Amplitude vs Temperature
vramp_vdd_lus659.gif
Figure 13. Modulator Ramp Amplitude vs VDD
icompsrc_temp_lus659.gif
Figure 15. Comp Source Current vs Temperature
vgd_temp_lus659.gif
Figure 17. Gate Drive Voltage vs Temperature
vref_vdd2_lus659.gif
Figure 19. Reference Voltage vs Temperature
minpw_lus69.gif
Figure 21. Minimum Controllable Pulse Width vs Frequency
idd_vdd_lus659.gif
Figure 2. Quiescent Current vs Input Voltage
uvlo_both_lus659.gif
Figure 4. UVLO Turn-On and Turn-Off vs Temperature
ilim_temp_12_lus659.gif
Figure 6. Current Limit Threshold vs Temperature
gpwr_vdd_lus659.gif
Figure 8. Power Stage Gain vs VDD
gpwr_temp2_lus659.gif
Figure 10. Power Stage Gain vs Temperature
vramp_temp4_lus659.gif
Figure 12. Modulator Ramp Amplitude vs Temperature
iib_temp_lus659.gif
Figure 14. Feedback Amplifier Input Bias Current vs Temperature
icmpsink_temp_lus659.gif
Figure 16. Comp Sink Current vs Temperature
vgd_vdd_lus659.gif
Figure 18. Gate Drive Voltage vs VIN
vref_temp_lus659.gif
Figure 20. Reference Voltage vs Temperature
dmax_vs_vvdd_lus659.gif
Figure 22. Maximum Duty Cycle vs Input Voltage