ZHCSGI2E july   2017  – july 2023 TAS2505-Q1

PRODUCTION DATA  

  1.   1
  2. 特性
  3. 应用
  4. 说明
  5. Revision History
  6. Pin Configuration and Functions
  7. Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics
    6. 6.6  I2S/LJF/RJF Timing in Master Mode
    7. 6.7  I2S/LJF/RJF Timing in Slave Mode
    8. 6.8  DSP Timing in Master Mode
    9. 6.9  DSP Timing in Slave Mode
    10. 6.10 I2C Interface Timing
    11. 6.11 SPI Interface Timing
    12. 6.12 Typical Characteristics
      1. 6.12.1 Class D Speaker Driver Performance
      2. 6.12.2 HP Driver Performance
  8. Parameter Measurement Information
  9. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Audio Analog I/O
      2. 8.3.2 Audio DAC and Audio Analog Outputs
      3. 8.3.3 DAC
      4. 8.3.4 POR
      5. 8.3.5 CLOCK Generation and PLL
      6. 8.3.6 Speaker Driver
      7. 8.3.7 Automotive Diagnostics
    4. 8.4 Device Functional Modes
      1. 8.4.1 Digital Pins
      2. 8.4.2 Analog Pins
      3. 8.4.3 Multifunction Pins
      4. 8.4.4 Analog Signals
        1. 8.4.4.1 Analog Inputs AINL and AINR
      5. 8.4.5 DAC Processing Blocks — Overview
      6. 8.4.6 Digital Mixing and Routing
      7. 8.4.7 Analog Audio Routing
      8. 8.4.8 5V LDO
      9. 8.4.9 Digital Audio and Control Interface
        1. 8.4.9.1 Digital Audio Interface
        2. 8.4.9.2 Control Interface
          1. 8.4.9.2.1 I2C Control Mode
          2. 8.4.9.2.2 SPI Digital Interface
        3. 8.4.9.3 Device Special Functions
    5. 8.5 Register Map
  10. Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Applications
      1. 9.2.1 Typical Configuration
        1. 9.2.1.1 Design Requirements
        2. 9.2.1.2 Detailed Design Procedure
        3. 9.2.1.3 Application Curves
      2. 9.2.2 Circuit Configuration With Internal LDO
        1. 9.2.2.1 Design Requirements
  11. 10Power Supply Recommendations
  12. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
    3. 11.3 Thermal Pad
  13. 12Device and Documentation Support
    1. 12.1 Documentation Support
      1. 12.1.1 Related Documentation
    2. 12.2 Receiving Notification of Documentation Updates
    3. 12.3 Community Resources
    4. 12.4 Trademarks
  14. 13Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息
SPI Digital Interface

In the SPI control mode, the TAS2505-Q1 uses the pins SCL/SSZ=SSZ, SCLK=SCLK, MISO=MISO, SDA/MOSI=MOSI as a standard SPI port with clock polarity setting of 0 (typical microprocessor SPI control bit CPOL = 0). The SPI port allows full-duplex, synchronous, serial communication between a host processor (the master) and peripheral devices (slaves). The SPI master (in this case, the host processor) generates the synchronizing clock (driven onto SCLK) and initiates transmissions. The SPI slave devices (such as the TAS2505-Q1) depend on a master to start and synchronize transmissions. A transmission begins when initiated by an SPI master. The byte from the SPI master begins shifting in on the slave MOSI pin under the control of the master serial clock (driven onto SCLK). As the byte shifts in on the MOSI pin, a byte shifts out on the MISO pin to the master shift register.

For more detailed information see the TAS2505 Application Reference Guide (SLAU472).