SCES528F December   2003  – May 2017 SN74LVC1G373

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics
    6. 6.6  Timing Requirements: TA = -40°C to +85°C
    7. 6.7  Timing Requirements: TA = -40°C to +125°C
    8. 6.8  Switching Characteristics: TA = -40°C to +85°C
    9. 6.9  Switching Characteristics: TA = -40°C to +85°C
    10. 6.10 Switching Characteristics: TA = -40°C to +125°C
    11. 6.11 Operating Characteristics
    12. 6.12 Typical Characteristics
  7. 7 Parameter Measurement Information
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Balanced High-Drive CMOS Push-Pull Outputs
      2. 8.3.2 Standard CMOS Inputs
      3. 8.3.3 Clamp Diodes
      4. 8.3.4 Partial Power Down (Ioff)
      5. 8.3.5 Over-voltage Tolerant Inputs
    4. 8.4 Device Functional Modes
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curve
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Documentation Support
      1. 12.1.1 Related Documentation
    2. 12.2 Receiving Notification of Documentation Updates
    3. 12.3 Community Resource
    4. 12.4 Trademarks
    5. 12.5 Electrostatic Discharge Caution
    6. 12.6 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • DBV|6
  • YZP|6
  • DCK|6
散热焊盘机械数据 (封装 | 引脚)
订购信息

6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1)
MIN MAX UNIT
VCC Supply voltage –0.5 6.5 V
VI Input voltage(2) –0.5 6.5 V
VO Voltage range applied to any output in the high-impedance or power-off state(2)(3) –0.5 6.5 V
VO Voltage range applied to any output in the high or low state(2)(3) –0.5 VCC + 0.5 V
IIK Input clamp current VI < 0 –50 mA
IOK Output clamp current VO < 0 –50 mA
IO Continuous output current ±50 mA
Continuous current through VCC or GND ±100 mA
TJ Absolute maximum Junction temperature 150 °C
Tstg Storage temperature –65 150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The value of VCC is provided in the Recommended Operating Conditions.

6.2 ESD Ratings

VALUE UNIT
V(ESD) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±2000 V
Charged-device model (CDM), per JEDEC specification JESD22-C101(2) ±1500
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. CDM tested on DBV package

6.3 Recommended Operating Conditions

See (1)
MIN MAX UNIT
VCC Supply voltage Operating 1.65 5.5 V
Data retention only 1.5
VIH High-level input voltage VCC = 1.65 V to 1.95 V 0.65 × VCC 5.5 V
VCC = 2.3 V to 2.7 V 1.7 5.5
VCC = 3 V to 3.6 V 2 5.5
VCC = 4.5 V to 5.5 V 0.7 × VCC 5.5
VIL Low-level input voltage VCC = 1.65 V to 1.95 V 0 0.35 × VCC V
VCC = 2.3 V to 2.7 V 0 0.7
VCC = 3 V to 3.6 V 0 0.8
VCC = 4.5 V to 5.5 V 0 0.3 × VCC
VO Output voltage 0 VCC V
IOH High-level output current VCC = 1.65 V –4 mA
VCC = 2.3 V –8
VCC = 3 V –16
–24
VCC = 4.5 V –32
IOL Low-level output current VCC = 1.65 V 4 mA
VCC = 2.3 V 8
VCC = 3 V 16
24
VCC = 4.5 V 32
Δt/Δv Input transition rise or fall rate VCC = 1.8 V ± 0.15 V, 2.5 V ± 0.2 V 20 ns/V
VCC = 3.3 V ± 0.3 V 10
VCC = 5 V ± 0.5 V 5
TA Operating free-air temperature DSBGA package –40 85 °C
All other packages –40 125
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. See Implications of Slow or Floating CMOS Inputs (SCBA004).

6.4 Thermal Information

THERMAL METRIC(1) SN74LVC1G373 UNIT
DBV (SOT-23) DCK (SC70) YZP (DSBGA)
6 PINS 6 PINS 6 PINS
RθJA Junction-to-ambient thermal resistance 219.8 255.2 131 °C/W
RθJC(top) Junction-to-case (top) thermal resistance 189 121.9 1.3 °C/W
RθJB Junction-to-board thermal resistance 65.8 58 22.6 °C/W
ψJT Junction-to-top characterization parameter 67.3 7.2 5.2 °C/W
ψJB Junction-to-board characterization parameter 65.2 57.3 22.6 °C/W
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report.

6.5 Electrical Characteristics

over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS VCC MIN TYP(1) MAX UNIT
VOH IOH = –100 µA 1.65 V to 5.5 V VCC – 0.1 V
IOH = –4 mA 1.65 V 1.2
IOH = –8 mA 2.3 V 1.9
IOH = –16 mA 3 V 2.4
IOH = –24 mA 2.3
IOH = –32 mA 4.5 V 3.8
VOL IOL = 100 µA 1.65 V to 5.5 V 0.1 V
IOL = 4 mA 1.65 V 0.45
IOL = 8 mA 2.3 V 0.3
IOL = 16 mA 3 V 0.4
IOL= 24 mA TA = –40°C to 85°C 0.55
TA = –40°C to 125°C 0.65
IOL= 32 mA TA = –40°C to 85°C 4.5 V 0.55
TA = –40°C to 125°C 0.65
II VI = 5.5 V or GND 0 V to 5.5 V ±1 µA
IOZ VO = 0 to 5.5 V 3.6 V ±5
Ioff VI or VO = 5.5 V 0 ±10
ICC VI = 5.5 V or GND, IO = 0 1.65 V to 5.5 V 10
ΔICC One input at VCC – 0.6 V,
Other inputs at VCC or GND		 3 V to 5.5 V 500
Ci VI = VCC or GND TA = –40°C to 85°C 3.3 V 3.5 pF
Co VO = VCC or GND TA = –40°C to 85°C 3.3 V 6
(1) All typical values are at VCC = 3.3 V, TA = 25°C.

6.6 Timing Requirements: TA = –40°C to +85°C

over recommended operating free-air temperature range (unless otherwise noted) (see Figure 2)
MIN MAX UNIT
tw Pulse duration, LE high 3 ns
tsu Setup time, data before LE↓ VCC = 1.8 V ± 0.15 V 2.4
VCC = 2.5 V ± 0.2 V 2
VCC = 3.3 V ± 0.3 V 1.5
VCC = 5 V ± 0.5 V 1.5
th Hold time, data after LE↓ VCC = 1.8 V ± 0.15 V 2.5
VCC = 2.5 V ± 0.2 V 1.5
VCC = 3.3 V ± 0.3 V 1.5
VCC = 5 V ± 0.5 V 1.5

6.7 Timing Requirements: TA = –40°C to +125°C

over recommended operating free-air temperature range (unless otherwise noted) (see Figure 2)
MIN MAX UNIT
tw Pulse duration, LE high 3 ns
tsu Setup time, data before LE↓ VCC = 1.8 V ± 0.15 V 2.9
VCC = 2.5 V ± 0.2 V 2.1
VCC = 3.3 V ± 0.3 V 1.5
VCC = 5 V ± 0.5 V 1.5
th Hold time, data after LE↓ VCC = 1.8 V ± 0.15 V 3
VCC = 2.5 V ± 0.2 V 1.5
VCC = 3.3 V ± 0.3 V 1.5
VCC = 5 V ± 0.5 V 1.5

6.8 Switching Characteristics: TA = –40°C to +85°C

over recommended operating free-air temperature range, CL = 15 pF (unless otherwise noted) (see Figure 2)
PARAMETER FROM
(INPUT)		 TO
(OUTPUT)		 TEST CONDITIONS MIN MAX UNIT
tpd D Q VCC = 1.8 V ± 0.15 V 2 15 ns
VCC = 2.5 V ± 0.2 V 15 5
VCC = 3.3 V ± 0.3 V 1 4
VCC = 5 V ± 0.5 V 1 3.5
LE VCC = 1.8 V ± 0.15 V 2 15
VCC = 2.5 V ± 0.2 V 1.5 5
VCC = 3.3 V ± 0.3 V 1 4
VCC = 5 V ± 0.5 V 1 3.5
ten OE Q VCC = 1.8 V ± 0.15 V 2 12.5
VCC = 2.5 V ± 0.2 V 1.5 4.5
VCC = 3.3 V ± 0.3 V 1 4
VCC = 5 V ± 0.5 V 1 2.5
tdis OE Q VCC = 1.8 V ± 0.15 V 2 14
VCC = 2.5 V ± 0.2 V 1.5 7
VCC = 3.3 V ± 0.3 V 1 7.9
VCC = 5 V ± 0.5 V 1 5.3

6.9 Switching Characteristics: TA = –40°C to +85°C

over recommended operating free-air temperature range, CL = 30 pF or 50 pF (unless otherwise noted) (see Figure 3)
PARAMETER FROM
(INPUT)		 TO
(OUTPUT)		 TEST CONDITIONS MIN MAX UNIT
tpd D Q VCC = 1.8 V ± 0.15 V 2 16 ns
VCC = 2.5 V ± 0.2 V 1.5 7.3
VCC = 3.3 V ± 0.3 V 1 5.4
VCC = 5 V ± 0.5 V 1 4
LE VCC = 1.8 V ± 0.15 V 2 16.3
VCC = 2.5 V ± 0.2 V 1.5 7.4
VCC = 3.3 V ± 0.3 V 1 5.5
VCC = 5 V ± 0.5 V 1 4
ten OE Q VCC = 1.8 V ± 0.15 V 2 13
VCC = 2.5 V ± 0.2 V 1.5 6.3
VCC = 3.3 V ± 0.3 V 1 5.1
VCC = 5 V ± 0.5 V 1 3.7
tdis OE Q VCC = 1.8 V ± 0.15 V 2 17.4
VCC = 2.5 V ± 0.2 V 1 5.9
VCC = 3.3 V ± 0.3 V 1 6.5
VCC = 5 V ± 0.5 V 1 4.6

6.10 Switching Characteristics: TA = –40°C to +125°C

over recommended operating free-air temperature range, CL = 30 pF or 50 pF (unless otherwise noted) (see Figure 3)
PARAMETER FROM
(INPUT)		 TO
(OUTPUT)		 TEST CONDITIONS MIN MAX UNIT
tpd D Q VCC = 1.8 V ± 0.15 V 2 17 ns
VCC = 2.5 V ± 0.2 V 1.5 8
VCC = 3.3 V ± 0.3 V 1 6
VCC = 5 V ± 0.5 V 1 4.5
LE VCC = 1.8 V ± 0.15 V 2 17
VCC = 2.5 V ± 0.2 V 1.5 8
VCC = 3.3 V ± 0.3 V 1 6
VCC = 5 V ± 0.5 V 1 4.5
ten OE Q VCC = 1.8 V ± 0.15 V 2 13.5
VCC = 2.5 V ± 0.2 V 1.5 7
VCC = 3.3 V ± 0.3 V 1 5.5
VCC = 5 V ± 0.5 V 1 4
tdis OE Q VCC = 1.8 V ± 0.15 V 2 18.4
VCC = 2.5 V ± 0.2 V 1 6.2
VCC = 3.3 V ± 0.3 V 1 6.8
VCC = 5 V ± 0.5 V 1 5
ten OE Q VCC = 1.8 V ± 0.15 V 2 14
VCC = 2.5 V ± 0.2 V 1.5 8.3
VCC = 3.3 V ± 0.3 V 0.9 6.5
VCC = 5 V ± 0.5 V 0.7 5.5
tdis OE Q VCC = 1.8 V ± 0.15 V 2 16
VCC = 2.5 V ± 0.2 V 1.1 7.3
VCC = 3.3 V ± 0.3 V 1.4 6
VCC = 5 V ± 0.5 V 0.8 5.1

6.11 Operating Characteristics

TA = 25°C
PARAMETER TEST CONDITIONS TYP UNIT
Cpd Power dissipation capacitance Outputs enabled f = 10 MHz VCC = 1.8 V 19 pF
VCC = 2.5 V 19
VCC = 3.3 V 19
VCC = 5 V 20
Outputs disabled VCC = 1.8 V 3
VCC = 2.5 V 3
VCC = 3.3 V 3
VCC = 5 V 4

6.12 Typical Characteristics

SN74LVC1G373 D001_sces528.gif
Figure 1. Propagation delay vs VCC