ZHCS228A June   2011  – February 2024 OPA564-Q1

PRODUCTION DATA  

  1.   1
  2. 特性
  3. 应用
  4. 说明
  5. Device Comparison Table
  6. Pin Configuration and Functions
  7. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Typical Characteristics
  8. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Adjustable Current Limit
        1. 7.3.1.1 Setting the Current Limit
      2. 7.3.2 Enable and Shutdown (E/S) Pin
      3. 7.3.3 Input Protection
      4. 7.3.4 Output Shutdown
      5. 7.3.5 Microcontroller Compatibility
      6. 7.3.6 Current Limit Flag
      7. 7.3.7 Thermal Protection
      8. 7.3.8 Junction Temperature Measurement Using TSENSE
    4. 7.4 Device Functional Modes
  9. Application and Implementation
    1. 8.1 Application Information
      1. 8.1.1 Basic Configuration
      2. 8.1.2 Output-Stage Compensation
      3. 8.1.3 Output Protection
      4. 8.1.4 Power Dissipation and Safe Operating Area
    2. 8.2 Typical Applications
      1. 8.2.1 Improved Howland Current Pump
      2. 8.2.2 Programmable Power Supply
      3. 8.2.3 Powerline Communication
      4. 8.2.4 Motor-Drive Circuit
      5. 8.2.5 DC Motor-Speed Controller (Without Tachometer)
      6. 8.2.6 Generating VDIG
      7. 8.2.7 Temperature Measurement
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
        1. 8.4.1.1 Thermally Enhanced PowerPAD™ Integrated Circuit Package
          1. 8.4.1.1.1 Bottom-Side Thermal Pad Assembly Process
  10. Device and Documentation Support
    1. 9.1 接收文档更新通知
    2. 9.2 支持资源
    3. 9.3 Trademarks
    4. 9.4 静电放电警告
    5. 9.5 术语表
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

Power Dissipation and Safe Operating Area

Power dissipation depends on power supply, signal, and load conditions. For dc signals, power dissipation is equal to the product of output current (IOUT) and the voltage across the conducting output transistor [(V+) – VOUT when sourcing; VOUT – (V–) when sinking]. Dissipation with ac signals is lower. See the Power Amplifier Stress and Power Handling Limitations application bulletin, available for download from www.ti.com, for an explanation on how to calculate or measure power dissipation with unusual signals and loads.

Figure 8-2 shows the safe operating area at room temperature with various heat-sinking efforts. Note that the safe output current decreases as (V+) – VOUT or VOUT – (V–) increases. Figure 8-3 shows the safe operating area at various temperatures with the thermal pad being soldered to a 2oz copper pad.

GUID-5CBB3F2D-0A65-4233-B094-2FB0A6991FD8-low.svg
 
Figure 8-2 Safe Operating Area at Room Temperature
GUID-385125A4-D89B-482D-8B4A-12FF3CA2DDAA-low.svg
Note: Thermal pad soldered to a 2-oz copper pad.
Figure 8-3 Safe Operating Area at Various Ambient Temperatures

The power that can be safely dissipated in the package is related to the ambient temperature and the heat-sink design. The PowerPAD integrated circuit package was specifically designed to provide excellent power dissipation, but board layout greatly influences the heat dissipation of the package. See Section 8.4.1.1 section for further details.

The relationship between thermal resistance and power dissipation can be expressed as:

Equation 4. TJ = TA + TJA
Equation 5. TJA = PD × θJA

Combining these equations produces:

Equation 6. TJ = TA + PD × θJA

where:

  • TJ = Junction temperature (°C)
  • TA = Ambient temperature (°C)
  • θJA = Junction-to-ambient thermal resistance (°C/W)
  • PD = Power dissipation (W)

To determine the required heat-sink area, calculate the required power dissipation and consider the relationship between power dissipation and thermal resistance to minimize shutdown conditions and allow for proper long-term operation (junction temperature of 85°C or less).

After the heat-sink area has been selected, test for worst-case load conditions to maintain proper thermal protection.

For applications with limited board size, see Figure 8-4 for the approximate thermal resistance relative to heat-sink area. Increasing heat-sink area beyond 2in2 provides little improvement in thermal resistance. To achieve the 28.7°C/W shown in Thermal Information, a 2oz copper plane size of 3in2 is used. The PowerPAD integrated circuit package is designed for continuous power levels from 2W to 4W, depending on ambient temperature and heat-sink area. The addition of airflow also influences maximum power dissipation, as Figure 8-5 illustrates. Higher power levels can be achieved in applications with a low on and off duty cycle, such as remote meter reading.

GUID-5480269A-2DBE-496F-A0A3-554889FB94CC-low.gifFigure 8-4 Thermal Resistance vs Circuit Board Copper Area
GUID-B68CA08E-A7F8-4CE0-8E81-32485DBAC306-low.svgFigure 8-5 Maximum Power Dissipation vs Temperature