ZHCSTK2 October   2023 BQ25185

PRODUCTION DATA  

  1.   1
  2. 1 特性
  3. 2 应用
  4. 3 说明
  5. 4 Revision History
  6. 5 说明（续）
  7. 6 Pin Configuration and Functions
  8. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Thermal Information
    4. 7.4 Recommended Operating Conditions
    5. 7.5 Electrical Characteristics
    6. 7.6 Timing Requirements
    7. 7.7 Typical Characteristics
  9. 8 Detailed Description
    1. 8.1 Overview
      1. 8.1.1 Battery Charging Process
        1. 8.1.1.1 Trickle Charge
        2. 8.1.1.2 Pre-Charge
        3. 8.1.1.3 Fast Charge
        4. 8.1.1.4 ISET Pin Detection
        5. 8.1.1.5 Termination
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1  Input Voltage Based Dynamic Power Management (VINDPM)
      2. 8.3.2  Dynamic Power Path Management Mode (DPPM)
      3. 8.3.3  Battery Supplement Mode
      4. 8.3.4  Sleep Mode
      5. 8.3.5  SYS Regulation
      6. 8.3.6  ILIM/VSET Control
      7. 8.3.7  Protection Mechanisms
        1. 8.3.7.1 Input Overvoltage Protection
        2. 8.3.7.2 Battery Undervoltage Lockout
        3. 8.3.7.3 Battery Overcurrent Protection
        4. 8.3.7.4 System Overvoltage Protection
        5. 8.3.7.5 System Short Protection
        6. 8.3.7.6 Thermal Protection and Thermal Regulation
        7. 8.3.7.7 Safety Timer
      8. 8.3.8  Pushbutton Wake and Reset Input
        1. 8.3.8.1 Pushbutton Long Button Press Function - Factory mode
      9. 8.3.9  External NTC Monitoring (TS)
        1. 8.3.9.1 TS Biasing and Function
      10. 8.3.10 Status Pins
    4. 8.4 Device Functional Modes
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Input Current and Battery Regulation Voltage - ILIM/VSET
        2. 9.2.2.2 Fast Charge Current- ISET
        3. 9.2.2.3 Recommended Passive Components
      3. 9.2.3 Application Curves
    3. 9.3 Power Supply Recommendations
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
      2. 9.4.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Device Support
      1. 10.1.1 第三方产品免责声明
    2. 10.2 接收文档更新通知
    3. 10.3 支持资源
    4. 10.4 Trademarks
    5. 10.5 静电放电警告
    6. 10.6 术语表
  12. 11Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

8.3.10 Status Pins

The device has two open drain configuration status pins (STAT1 and STAT2) which can be externally pulled up and either be connected to an LED or an IO pin of an MCU to be able to inform the host or the user on the charger status.

When there is no battery present, the device will charge the capacitor on the BAT pin and toggle between charging done, charge completed. So STAT1 pin will be stable where as STAT2 pin will toggle between HIGH and LOW.

Table 8-2 Status Pins State Table
CHARGING STATESTAT1 PIN STATESTAT2 PIN STATE

Charge completed, charger in sleep mode or charge disabled (including VBAT >VRCH)

HIGH

HIGH

Normal Charge in progress (including automatic recharge)

HIGH

LOW

Recoverable fault (VIN_OVP, TS HOT, TS COLD, TSHUT, System Short protection)

LOW

HIGH

Non-recoverable or latch-off fault (ILIM/ISET pin short, BATOCP, Safety TMR_EXP for charging)

LOW

LOW