ZHCSH54 December   2017 ADS7054

PRODUCTION DATA.  

  1. 特性
  2. 应用
  3. 说明
  4. 修订历史记录
  5. Pin Configuration and Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements
    7. 6.7 Switching Characteristics
    8. 6.8 Typical Characteristics
  7. Parameter Measurement Information
    1. 7.1 Digital Voltage Levels
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Product Family
      2. 8.3.2 Analog Input
      3. 8.3.3 Reference
      4. 8.3.4 ADC Transfer Function
    4. 8.4 Device Functional Modes
      1. 8.4.1 ACQ State
      2. 8.4.2 CNV State
      3. 8.4.3 OFFCAL State
        1. 8.4.3.1 Offset Calibration on Power-Up
        2. 8.4.3.2 Offset Calibration During Normal Operation
  9. Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Applications
      1. 9.2.1 2-Channel, Simultaneous Sampling Data Acquisition Using the ADS7054
        1. 9.2.1.1 Design Requirements
        2. 9.2.1.2 Detailed Design Procedure
          1. 9.2.1.2.1 Low Distortion Charge Kickback Filter Design
          2. 9.2.1.2.2 Input Amplifier Selection
          3. 9.2.1.2.3 Reference Circuit
        3. 9.2.1.3 Application Curves
      2. 9.2.2 Improving Precision of Single-Ended Signal Source Measurements Using the ADS7054
        1. 9.2.2.1 Design Requirements
        2. 9.2.2.2 Detailed Design Procedure
        3. 9.2.2.3 Application Curve
  10. 10Power Supply Recommendations
    1. 10.1 AVDD and DVDD Supply Recommendations
    2. 10.2 Optimizing Power Consumed by the Device
      1. 10.2.1 Estimating Digital Power Consumption
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12器件和文档支持
    1. 12.1 器件支持
      1. 12.1.1 开发支持
    2. 12.2 文档支持
      1. 12.2.1 相关文档
    3. 12.3 接收文档更新通知
    4. 12.4 社区资源
    5. 12.5 商标
    6. 12.6 静电放电警告
    7. 12.7 Glossary
  13. 13机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

Specifications

Absolute Maximum Ratings(1)

MIN MAX UNIT
AVDD to GND –0.3 3.9 V
DVDD to GND –0.3 3.9 V
AINP to GND –0.3 AVDD + 0.3 V
AINM to GND –0.3 AVDD + 0.3 V
Input current to any pin except supply pins –10 10 mA
Digital input voltage to GND –0.3 DVDD + 0.3 V
Storage temperature, Tstg –60 150 °C
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

ESD Ratings

VALUE UNIT
V(ESD) Electrostatic discharge Human body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±2000 V
Charged device model (CDM), per JEDEC specification JESD22-C101(2) ±1000
JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)
MIN NOM MAX UNIT
AVDD Analog supply voltage range 1.65 3.3 3.6 V
DVDD Digital supply voltage range 1.65 1.8 3.6 V
TA Operating free-air temperature –40 25 125 °C

Thermal Information

THERMAL METRIC(1) ADS7054 UNIT
RUG (X2QFN)
8 PINS
RθJA Junction-to-ambient thermal resistance 177.5 °C/W
RθJC(top) Junction-to-case (top) thermal resistance 51.5 °C/W
RθJB Junction-to-board thermal resistance 76.7 °C/W
ψJT Junction-to-top characterization parameter 1 °C/W
ψJB Junction-to-board characterization parameter 76.7 °C/W
RθJC(bot) Junction-to-case (bottom) thermal resistance N/A °C/W
For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report.

Electrical Characteristics

at AVDD = 3.3 V, DVDD = 1.65 V to 3.6 V, fsample = 1 MSPS, and VCM = 1.65 V (unless otherwise noted); minimum and maximum values for TA = –40°C to +125°C; typical values at TA = 25°C
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
ANALOG INPUT
Full-scale input voltage span(1) –AVDD AVDD V
Absolute input voltage range AINP to GND –0.1 AVDD + 0.1 V
AINM to GND –0.1 AVDD + 0.1
Common-mode voltage (AINP + AINM) / 2 (AVDD / 2) – 0.1 (AVDD / 2) + 0.1 V
CS Sampling capacitance 16 pF
SYSTEM PERFORMANCE
Resolution 14 Bits
NMC No missing codes 14 Bits
INL(8) Integral nonlinearity –3 ±0.9 3 LSB(2)
DNL Differential nonlinearity –0.99 ±0.5 1 LSB
EO(8) Offset error After calibration(7) –6 ±1 6 LSB
dVOS/dT Offset error drift with temperature 1.75 ppm/°C
EG(8) Gain error –0.1 ±0.01 0.1 %FS
Gain error drift with temperature 0.5 ppm/°C
SAMPLING DYNAMICS
tCONV Conversion time 18 × tSCLK ns
tACQ Acquisition time 230 ns
fSAMPLE Maximum throughput rate 24-MHz SCLK, AVDD = 1.65 V to 3.6 V 1 MHz
Aperture delay 3 ns
Aperture jitter, RMS 12 ps
DYNAMIC CHARACTERISTICS
SNR Signal-to-noise ratio(4) AVDD = 3.3 V, fIN = 2 kHz 76 79.6 dB
AVDD = 2.5 V, fIN = 2 kHz 78.5
THD Total harmonic distortion(4)(3) fIN = 2 kHz 92 dB
fIN = 100 kHz 90.8
fIN = 200 kHz 90
SINAD Signal-to-noise and distortion(4) fIN = 2 kHz 76 79.4 dB
fIN = 100 kHz 78.7
fIN = 200 kHz 78.5
SFDR Spurious-free dynamic range(4) fIN = 2 kHz 92 dB
fIN = 100 kHz 91.7
fIN = 200 kHz 90
BW(fp) Full-power bandwidth At –3 dB 200 MHz
DIGITAL INPUT/OUTPUT (CMOS Logic Family)
VIH High-level input voltage(5) 0.65 DVDD DVDD + 0.3 V
VIL Low-level input voltage(5) –0.3 0.35 DVDD V
VOH High-level output voltage(5) At Isource = 500 µA 0.8 DVDD DVDD V
At Isource = 2 mA DVDD – 0.45 DVDD
VOL Low-level output voltage(5) At Isink = 500 µA 0 0.2 DVDD V
At Isink = 2 mA 0 0.45
POWER-SUPPLY REQUIREMENTS
AVDD Analog supply voltage 1.65 3 3.6 V
DVDD Digital I/O supply voltage 1.65 3 3.6 V
IAVDD Analog supply current AVDD = 3.3 V, fSAMPLE = 1 MSPS 450 560 µA
AVDD = 3.3 V, fSAMPLE = 100 kSPS 47 55
AVDD = 3.3 V, fSAMPLE = 10 kSPS 5
AVDD = 1.8 V, fSAMPLE = 1 MSPS 230
Static current with CS and SCLK high 0.02
IDVDD Digital supply current DVDD = 1.8 V, CSDO = 20 pF,
output code = 2AAAh(6)
250 µA
DVDD = 1.8 V, static current with CS and SCLK high 0.01
Ideal input span; does not include gain or offset error.
LSB means least significant bit.
Calculated on the first nine harmonics of the input frequency.
All specifications expressed in decibels (dB) refer to the full-scale input (FSR) and are tested with an input signal 0.5 dB below full-scale, unless otherwise noted.
Digital voltage levels comply with the JESD8-7A standard for DVDD from 1.65 V to 1.95 V; see the Parameter Measurement Information section for details.
See the Estimating Digital Power Consumption section for details.
See the OFFCAL State section for details.
See Figure 31, Figure 29, and Figure 30 for statistical distribution data for INL, offset error, and gain error.

Timing Requirements

all specifications are at AVDD = 1.65 V to 3.6 V, DVDD = 1.65 V to 3.6 V, and CLOAD-SDO = 20 pF (unless otherwise noted); minimum and maximum values for TA = –40°C to +125°C; typical values at TA = 25°C
MIN TYP MAX UNIT
tCLK Time period of SCLK 41.66 ns
tsu_CSCK Setup time: CS falling edge to SCLK falling edge 7 ns
tht_CKCS Hold time: SCLK rising edge to CS rising edge 8 ns
tph_CK SCLK high time 0.45 0.55 tSCLK
tpl_CK SCLK low time 0.45 0.55 tSCLK
tph_CS CS high time 15 ns

Switching Characteristics

all specifications are at AVDD = 1.65 V to 3.6 V, DVDD = 1.65 V to 3.6 V, and CLOAD-SDO = 20 pF (unless otherwise noted); minimum and maximum values for TA = –40°C to +125°C; typical values at TA = 25°C
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
tCYCLE(1) Cycle time 1000 ns
tCONV Conversion time 18 × tSCLK ns
tden_CSDO Delay time: CS falling edge to data enable 6.5 ns
td_CKDO Delay time: SCLK rising edge to (next) data valid on SDO 10 ns
tht_CKDO SCLK rising edge to current data invalid 2.5 ns
tdz_CSDO Delay time: CS rising edge to SDO going to tri-state 5.5 ns
tCYCLE = 1 / fSAMPLE.
ADS7054 tim_spi_data_revB_sbas769.gif Figure 1. Serial Transfer Frame
ADS7054 tim_spi_specs_sbas769.gif Figure 2. Timing Specifications

Typical Characteristics

at TA = 25°C, AVDD = 3.3 V, DVDD = 1.8 V, fIN = 2 kHz, and fsample = 1 MSPS (unless otherwise noted)
ADS7054 D001_SBAS859.gif
SNR = 80.6 dB, THD = –91.6 dB, ENOB = 13.0 bits
Figure 3. Typical FFT
ADS7054 D003_SBAS859.gif
SNR = 76.6dB, THD = –90.6 dB, fIN = 200 kHz
Figure 5. Typical FFT
ADS7054 D006_SBAS859.gif
Figure 7. SNR and SINAD vs Input Frequency
ADS7054 D008_SBAS859.gif
Figure 9. THD vs Temperature
ADS7054 D012_SBAS859.gif
Figure 11. THD vs Reference Voltage (AVDD)
ADS7054 D011_SBAS859.gif
Figure 13. SFDR vs Input Frequency
ADS7054 D019_SBAS859.gif
Figure 15. Typical DNL
ADS7054 D023_SBAS859.gif
Figure 17. DNL vs Temperature
ADS7054 D025_SBAS859.gif
Figure 19. INL vs Temperature
ADS7054 D014_SBAS859.gif
VIN = 0 (differential)
Figure 21. DC Input Histogram
ADS7054 D016_SBAS859.gif
Figure 23. Offset vs Reference Voltage (AVDD)
ADS7054 D027_SBAS859.gif
Figure 25. AVDD Current vs Temperature
ADS7054 D029_SBAS859.gif
Figure 27. AVDD Current vs AVDD Voltage
ADS7054 D031_SBAS859.gif
Figure 29. Typical Offset Error Distribution
ADS7054 D033_SBAS859.gif
Figure 31. Typical INL Distribution
ADS7054 D002_SBAS859.gif
SNR = 78.5 dB, THD = –89.5 dB, fIN = 100 kHz
Figure 4. Typical FFT
ADS7054 D005_SBAS859.gif
Figure 6. SNR and SINAD vs Temperature
ADS7054 D007_SBAS859.gif
Figure 8. SNR and SINAD vs Reference Voltage (AVDD)
ADS7054 D010_SBAS859.gif
Figure 10. THD vs Input Frequency
ADS7054 D009_SBAS859.gif
Figure 12. SFDR vs Temperature
ADS7054 D013_SBAS859.gif
Figure 14. SFDR vs Reference Voltage (AVDD)
ADS7054 D020_SBAS859.gif
Figure 16. Typical INL
ADS7054 D024_SBAS859.gif
Figure 18. DNL vs Reference Voltage
ADS7054 D026_SBAS859.gif
Figure 20. INL vs Reference Voltage
ADS7054 D015_SBAS859.gif
Figure 22. Offset vs Temperature
ADS7054 D017_SBAS859.gif
Figure 24. Gain Error vs Temperature
ADS7054 D028_SBAS859.gif
Figure 26. AVDD Current vs Throughput
ADS7054 D030_SBAS785.gif
CS = DVDD
Figure 28. Static AVDD Current vs Temperature
ADS7054 D032_SBAS859.gif
Figure 30. Typical Gain Error Distribution