SNAS483F February   2010  – August 2015 ADC128D818

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Description (continued)
  6. 6 Pin Configuration and Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 DC Electrical Characteristics
    6. 7.6 AC Electrical Characteristics
    7. 7.7 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Supply Voltage (V+)
      2. 8.3.2 Voltage References (VREF)
      3. 8.3.3 Analog Inputs (IN0 - IN7)
        1. 8.3.3.1 Single-Ended Input
        2. 8.3.3.2 Pseudo-Differential Input
    4. 8.4 Device Functional Modes
      1. 8.4.1 Modes of Operation
    5. 8.5 Programming
      1. 8.5.1 Interface
        1. 8.5.1.1 Serial Bus Address
        2. 8.5.1.2 Time-out
          1. 8.5.1.2.1 Example Writes and Reads
    6. 8.6 Register Maps
      1. 8.6.1  ADC128D818 Internal Registers
      2. 8.6.2  Configuration Register — Address 00h
      3. 8.6.3  Interrupt Status Register — Address 01h
      4. 8.6.4  Interrupt Mask Register — Address 03h
      5. 8.6.5  Conversion Rate Register — Address 07h
      6. 8.6.6  Channel Disable Register — Address 08h
      7. 8.6.7  One-Shot Register — Address 09h
      8. 8.6.8  Deep Shutdown Register — Address 0Ah
      9. 8.6.9  Advanced Configuration Register — Address 0Bh
      10. 8.6.10 Busy Status Register — Address 0Ch
      11. 8.6.11 Channel Readings Registers — Addresses 20h - 27h
      12. 8.6.12 Limit Registers — Addresses 2Ah - 39h
      13. 8.6.13 Manufacturer ID Register — Address 3Eh
      14. 8.6.14 Revision ID Register — Addresses 3Fh
  9. 9 Application and Implementation
    1. 9.1 Application Information
      1. 9.1.1 Digital Output (DOUT)
      2. 9.1.2 Temperature Measurement System
        1. 9.1.2.1 Temperature Limits
      3. 9.1.3 Interrupt Structure
        1. 9.1.3.1 Interrupt Output (INT)
        2. 9.1.3.2 Interrupt Clearing
        3. 9.1.3.3 Temperature Interrupt
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Power Management
        2. 9.2.2.2 Using the ADC128D818
          1. 9.2.2.2.1 Quick Start
          2. 9.2.2.2.2 Poweron Reset (POR)
          3. 9.2.2.2.3 Configuration Register (address 00h)
          4. 9.2.2.2.4 Interrupt Status Register (address 01h)
          5. 9.2.2.2.5 Interrupt Mask Register (address 03h)
          6. 9.2.2.2.6 Conversion Rate Register (address 07h)
          7. 9.2.2.2.7 One-Shot Register (address 09h)
          8. 9.2.2.2.8 Deep Shutdown Register (address 0Ah)
          9. 9.2.2.2.9 Channel Readings Registers (addresses 20h - 27h)
      3. 9.2.3 Application Curve
    3. 9.3 System Examples
      1. 9.3.1 General Voltage Monitoring
      2. 9.3.2 Voltage Monitoring for Power Supplies
      3. 9.3.3 Temperature Sensors
      4. 9.3.4 Bridge Sensors
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Documentation Support
      1. 12.1.1 Related Documentation
    2. 12.2 Community Resources
    3. 12.3 Trademarks
    4. 12.4 Electrostatic Discharge Caution
    5. 12.5 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

12 Device and Documentation Support

12.1 Documentation Support

12.1.1 Related Documentation

For related documentation, see the following:

  • LM94022/22Q 1.5V, SC70, Multi-Gain Analog Temp Sensor w/Class-AB Output, SNIS140
  • LM4040-EP Precision Micropower Shunt Voltage Reference, SLOS746
  • LM4050-N/LM4050-N-Q1 Precision Micropower Shunt Voltage Reference, SNOS455
  • LM4120 Precision Micropower Low Dropout Voltage Reference, SNVS049
  • LM4140 High Precision Low Noise Low Dropout Voltage Reference, SNVS053

12.2 Community Resources

The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of Use.

    TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help solve problems with fellow engineers.
    Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and contact information for technical support.

12.3 Trademarks

E2E is a trademark of Texas Instruments.

All other trademarks are the property of their respective owners.

12.4 Electrostatic Discharge Caution

esds-image

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.

12.5 Glossary

SLYZ022 — TI Glossary.

This glossary lists and explains terms, acronyms, and definitions.