選取版本

選取版本

找不到結果。請清除您的搜尋條件，然後再試一次。

TPS257XX-Q1-GUI

Graphical user interface for the TPS2576x-Q1 and TPS2577x-Q1 USB Power Delivery controller device family and EVMs

選取版本
找不到結果。請清除您的搜尋條件，然後再試一次。
最新版本
版本: 2.1.0
發行日期: 2024/11/11
open-in-new

檢視軟體詳細資訊

download

TPS257xx-Q1-GUI download  — 0 K

Download from dev.ti.com gallery dashboard
產品
USB-C 功率傳輸控制器
TPS25762-Q1 — 具整合式降壓升壓穩壓器的車用 USB Type-C® PD 控制器 TPS25763-Q1 — 具有降壓升壓穩壓器和 DisplayPort Alt 模式的車用單埠 USB Type-C® PD 控制器 TPS25772-Q1 — 具降壓升壓穩壓器和智慧型電源管理的車用雙埠 USB Type-C® PD 控制器
硬體開發
參考設計
PMP40933 — CISPR 25 Class 5、400-kHz 額定值、120-W、車用雙 USB Type-C® PD 充電器參考設計 PMP40934 — CISPR 25 Class 5、400-kHz 額定值、60-W、車用單一 USB Type-C® PD 充電器參考設計
開發板
TPS25762DQ1EVM — 具有單埠充電功能且適用於 D 版本的 TPS25762-Q1 評估模組 TPS25763Q1EVM — TPS25763-Q1 評估模組 TPS25772DQ1EVM — 具有雙埠充電功能且適用於 D 版本的 TPS25772-Q1 評估模組 TPS25772Q1EVM-CD-150 — TPS25772-Q1 評估模組，適用於具有 USB 2.0 集線器的雙埠 USB Type-C® 電力傳輸充電器

版本資訊

V2.1.0

Requires base firmware release F411.04.01 for D revision devices

Requires base firmware release F311.03.10 or F311.03.11 for C revision devices


Improvements

  • New: Added support for TPS257xxD-Q1 devices
  • Target device must be selected in the updated Quick Start page to create a binary or import an existing app config JSON
  • UI allows for "C" devices or "D" devices to be selected ("CA" device variants are supported when "C" devices are selected in the UI)
  • Added DP Alternate Mode configurability (see "ALT MODE" tab) for TPS25763D device variant
  • New: Added support to import prior revision JSON configuration files ("C" devices) to "D" devices when selected
  • Recommend reviewing resulting configuration for any unexpected changes before programming
  • New: Updated "VIN Engine On/Off" tab
  • Applies to revision C and D devices
  • Updated User Interface (UI) and field naming to improve intuitiveness (available features/controls for revision C have not changed, only naming & UI layout)
  • Added new controls specific to "D" devices: support for additional power level and threshold settings ("RANGE 4") for improved port power management options
  • Update: For TPS25762C/D and '763D device configurations, GPIO2 and GPIO3 are set to default to "Disabled" for new configurations (was previously enabling I2C function by default)



Bug Fixes

  • n/a



Known Limitations

  • "USB Endpoint Flash" programming with TPS25763D-Q1 EVM (IPP015) may not function reliably. Recommend using "EEPROM Flash" programming in the GUI to load user application configuration binary when using the EVM. Alternatively, can use direct programming of EEPROM using a 3rd party programming tool.