TIDA-00175
5V BiSS 位置編碼器介面參考設計
TIDA-00175
概覽
This reference design implements a hardware interface based on the BiSS standard for position or rotary encoders. It supports both BiSS point-to-point and BiSS bus configurations. The building blocks include the power supply for a 5-V BiSS encoder with innovative smart eFuse technology and robust full-duplex RS-485 transceivers including line termination and EMC protection. An auxiliary power supply and logic level interface with adjustable I/O voltage level is provided to connect to subsequent MCUs and MPUs that would run the BiSS (or SSI) master protocol stack. This design is fully tested to meet EMC immunity requirements for ESD, fast-transient burst and surge according to IEC61800-3.
特點
- 3.3-V RS-485 full-duplex transceivers with IEC-ESD meets BiSS clock frequency (10 Mhz)
- Design meets EMC immunity requirements for ESD, fast transient burst and surge according to IEC61800-3
- Wide input (15 to 30 VDC) high-efficiency (>85%) DC/DC power supply for 5-V BiSS (or SSI) encoders with 35 0mA, lowest-ripple (<20-mVpp) output
- Protected power supply with innovative eFuse technology with inrush current limitation and protection against over-current, over- and under-voltage and disconnect in case of fault
- Option to shut down encoder power supply in case of fault or to save power when no encoder is connected
- 3.3-V interface with level shifter to also support 2.5-V or 1.8-V I/O interface to processors to run the BiSS (or SSI) master
已開發完全組裝的電路板，僅供測試與性能驗證，且為非賣品。
設計檔案與產品
設計檔案
下載立即可用的系統檔案以加速您的設計流程。
產品
設計與潛在替代方案中包括 TI 產品。
技術文件
| 類型 | 標題 | 下載最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 設計指南 | Interface to a 5-V BiSS Position Encoder (TIDA-00175) | 2014/6/20 | |||
| 技術文章 | Designing an EMC-compliant interface to motor position encoders – Part 6 | PDF | HTML | 2015/11/20 |