LAUNCHXL-CC1350-4
适用于 433MHz/2.4GHz 应用的 CC1350 双频带 Launchpad
LAUNCHXL-CC1350-4
概述
SimpleLink™ CC1350 无线微控制器 (MCU) LaunchPad™ 开发套件将 433MHz 与 Bluetooth® 低耗能无线电相结合，实现了轻松手机集成与远距离连接的完美组合，并在单个芯片上配有 32 位 ARM® Cortex®-M3 处理器。
特性
- 具有 433MHz 和蓝牙低耗能无线电的 LaunchPad 套件，适用于带有集成型 PCB 迹线天线的无线应用
- 通过 BoosterPack™ 插件模块连接器访问所有 I/O 信号
- 使用板载仿真器可立即开始在 CCS Cloud 中进行即时代码开发
- 可与 LaunchPad 套件和 SmartRF™ Studio 评估板应用配合使用
- 与 LCD BoosterPack 模块兼容
- Micro USB Cable (CNT-USB-AM+MICRO-USB-500 from Connector Elec)
- CC1350 Dualband Launchpad for 433MHz/2.4GHz Applications
多协议产品
开始使用
- 订购适用于 433MHz/2.4GHz 应用的 CC1350 双频带 Launchpad
- 下载 {48}CC13x0 SDK{49}
- 接受 SimpleLink Academy 培训
立即订购并开发
评估板
LAUNCHXL-CC1350-4 — 适用于 433MHz/2.4GHz 应用的 CC1350 双频带 Launchpad
TI.com 上无现货
FLASH-PROGRAMMER-2 — SmartRF 闪存编程器 v2
最新版本
版本: 1.8.2
发布日期: 05 七月 2020
Zip file with Windows Installer and SW Manifest
产品
蓝牙产品
低于 1GHz 产品
Wi-SUN 产品
Zigbee 产品
多协议产品
其他无线技术
硬件开发
文档
Compressed source file archive
最新信息
- Support for the CC2640R2L added.
- Updated emupack to version 9.2.0.00002.
发布信息
SmartRF Flash Programmer 2 can be used to program the flash memory in Texas Instruments ARM based low-power RF wireless MCUs over the debug and serial interfaces. The flash programmer includes both a graphical user interface and a command line interface.
PACKET-SNIFFER-2 — SmartRF 数据包监听器 2
最新版本
版本: 1.9.0
发布日期: 14 二月 2021
Zip file with Windows installer and readme instructions
产品
蓝牙产品
低于 1GHz 产品
Wi-SUN 产品
多协议产品
硬件开发
文档
HTML document
最新信息
- Support for TI WBMS (Wireless Battery Management System) protocol on the LAUNCHXL-CC26X2R platform
- Support for Wi-SUN PHY modes #1a, #1b, #2a, #2b, #3, #4a and #4b on the LAUNCHXL-CC1312R, LAUNCHXL-CC1352R1 and LAUNCHXL-CC1352P LaunchPads
- Support for ZigBee R23 sub-1 GHz 100kbps on LAUNCHXL-CC1352R, LAUNCHXL-CC1312R and LAUNCHXL-CC1352P1
- Support for ZigBee R23 sub-1 GHz 500kbps on LAUNCHXL-CC1352R, LAUNCHXL-CC1312R and LAUNCHXL-CC1352P1
- The IAR and CCS projects are compatible with SimpleLink CC13X2 and CC26X2 SDK 4.40
- Wireshark official dissector used for IEEE 802.15.4g traffic
发布信息
SmartRF Packet Sniffer 2 includes software and firmware to capture and display over-the-air packets. The capture device is connected to the PC via USB. SmartRF Packet Sniffer 2 supports the CC13xx and CC26xx family of devices as capture device and uses Wireshark for packet display and filtering. Please note that device revision C (1.1) of CC13x2/CC26x2 is no longer supported. Download SmartRF Packet Sniffer 2 v1.6.0 if you use CC13x2/CC26x2 device revision C (1.1).
SIMPLELINK-CC13X0-SDK — SimpleLink™ CC13x0 软件开发套件
最新版本
版本: 4.20.02.07
发布日期: 28 六月 2022
产品
低于 1GHz 产品
多协议产品
硬件开发
文档
Manifest for Simplelink CC13x0 SDK
发布信息
The SimpleLink™ CC13x0 Software Development Kit (SDK) is part of the Texas Instruments SimpleLink family of wireless microcontrollers (MCUs), offering a single development environment that delivers flexible hardware, software and tool options for customers developing wired and wireless applications. For more information about the SimpleLink MCU platform, visit www.ti.com/simplelink.
SimpleLink™ CC13x0 Software Development Kit is a set of software development tools that enables engineers to develop software applications on the SimpleLink™ CC13x0 ULP devices. This powerful software toolkit provides a cohesive and consistent software experience for all SimpleLink™ CC13x0 users by packaging essential software components such as TI RTOS, peripheral drivers, TI 15.4-Stack, Bluetooth Low Energy, and RF-Proprietary examples in one easy-to-use software package along with exhaustive documentation.
This is version 4.20.02.07 of the SimpleLink CC13x0 SDK.
最新信息
- The ECDH and ECDSA driver has been updated with new validation options. This driver will now validate public key, random string, signature and private key before driver operations.
- Bugfix for the TI 15.4-Stack
- SimpleLink platform level changes are available in SimpleLink Core SDK Release Notes
- SDK Change Log provides a list of all SDK component changes
- Please refer to the Document Overview for the individual release notes and details for starting development with each SDK component
SENSOR-CONTROLLER-STUDIO — Sensor Controller Studio
最新版本
版本: 2.9.0
发布日期: 08 四月 2022
Installer executable
Compressed archive
产品
蓝牙产品
低于 1GHz 产品
Wi-SUN 产品
Zigbee 产品
多协议产品
其他无线技术
硬件开发
开发套件
文档
HTML document
Compressed source file archive
发布信息
Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, allowing for ultra-low power application design.
The tool generates a Sensor Controller Interface driver, which is a set of C source files to be compiled into the System CPU (ARM Cortex-M3/M4) application. These source files contain the Sensor Controller firmware image and associated definitions, and generic functions that allow the System CPU application to control the Sensor Controller and exchange data.
The Sensor Controller is a small CPU core that is highly optimized for low power consumption and efficient peripheral operation. The Sensor Controller is located in the CC26xx/CC13xx auxiliary (AUX) power/clock domain, and can perform simple background tasks autonomously and independently of the System CPU and the MCU domain power state. Such tasks include but are not limited to:
- Analog sensor polling, using ADC or comparator
- Digital sensor polling, using SPI, I2C or other protocols
- Capacitive sensing, using current source, comparator and time-to-digital converter (TDC)
- Waveform generation, for example for LCDs
The Sensor Controller is user programmable, using a simple programming language with syntax similar to C. This allows for sensor polling and other tasks to be specified as sequential algorithms, rather than static configuration of complex peripheral modules, timers, DMA, register programmable state machines, event routing and so on. The main advantages are:
- Flexibility
- Dynamic reuse of hardware resources
- Ability to perform simple data processing without need for dedicated hardware
- Observability and debugging options
最新信息
- Added support for new devices: CC2672R3, CC2672P3, CC2662R-Q1, CC2652PSIP and CC2652P7.
- Added example support for new SDKs, using TI-RTOS 7 and GPIO driver for the latest CC13x2/CC26x2 SDK.
- Minor improvements.
- Bug-fixes.
SMARTRFTM-STUDIO — SmartRF Studio
最新版本
版本: 2.26.0
发布日期: 08 七月 2022
产品
蓝牙产品
MSP430 微控制器
低于 1GHz 产品
Wi-SUN 产品
Thread 产品
Zigbee 产品
多协议产品
其他无线技术
硬件开发
开发套件
评估板
文档
SmartRF Studio 7 in Cloud TI Resource Explorer
Compressed source file archive
发布信息
SmartRF™ Studio is a Windows application that can be used to evaluate and configure Low Power RF devices from Texas Instruments. The application helps designers of RF systems to easily evaluate the radio at an early stage in the design process. It is especially useful for generation of configuration register values and commands, and for practical testing and debugging of the RF system. SmartRF Studio can be used either as a standalone application or together with applicable evaluation boards or debug probes for the RF device.
最新信息
- Added support for the CC1312PSIP device
- Updated RF PHY settings for the CC13x4/CC26x4 devices
- Enabled High TX Output power values for the CC13x4/CC26x4 devices
- Updated RF PHY settings for the CC2652PSIP device
- Updated RF PHY settings for the CC2651R3SIPA device
- Various improvements and bug-fixes
设计文件
技术文档
= TI 精选文档
未找到结果。请清除搜索，并重试。
查看所有 2
| 类型 | 标题 | 下载最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 用户指南 | CC1350 LaunchPad Getting Started Guide (Rev. B) | 2018年 6月 20日 | |||
| 证书 | LAUNCHXL-CC1350-4 EC Declaration of Conformity (DoC) (Rev. A) | 2019年 1月 2日 |