UCD9090-Q1
- Qualified for automotive applications
- AEC-Q100 qualified with the following results:
- Device temperature grade 1: –40°C to 125°C ambient operating temperature range
- Device HBM ESD classification level H2
- Device CDM ESD classification level C4B
- UCD9090-Q1 Monitor and sequence
10 voltage rails
- All rails sampled every 400 µs
- 12-bit ADC with 2.5-V, 0.5% internal VREF
- Sequence based on time, rail and pin dependencies
- Four programmable undervoltage and overvoltage thresholds per monitor
- Nonvolatile error and peak-value logging per monitor (up to 30 fault detail entries)
- Closed-loop margining for 10 rails
- Margin output adjusts rail voltage to match user-defined margin thresholds
- Programmable watchdog timer and system reset
- Flexible digital I/O configuration
- Pin-selected rail states
- Cascading multiple devices
- Multi-phase PWM clock generator
- Clock frequencies from
15.259 kHz to
125 MHz - Capability to configure independent clock outputs for synchronizing switch-mode power supplies
- Clock frequencies from
15.259 kHz to
- JTAG and I2C/SMBus/PMBus™ interfaces
The UCD9090-Q1 is a 10-rail PMBus and I2C addressable power-supply sequencer and monitor. The device integrates a 12-bit ADC for monitoring up to 10 power-supply voltage inputs. Twenty-three GPIO pins can be used for power supply enables, power-on reset signals, external interrupts, cascading, or other system functions. Ten of these pins offer PWM functionality. Using these pins, the UCD9090-Q1 offers support for margining, and general-purpose PWM functions.
Specific power states can be achieved using the pin-selected rail states feature. This feature allows with the use of up to 3 GPIs to enable and disable any rail. This is useful for implementing system low-power modes and the Advanced Configuration and Power Interface (ACPI) specification that is used for hardware devices.
The TI Fusion Digital Power™ designer software provides device configuration. This PC-based user interface (UI) offers an intuitive interface for configuring, storing, and monitoring all system operating parameters.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | 10-Rail Power Supply Sequencer and Monitor with ACPI Support.. datasheet (Rev. B) | PDF | HTML | 2017/9/29 | ||
| 應用說明 | How to Interpret UCD90XXX CSV File | PDF | HTML | 2024/5/29 | |||
| 應用說明 | UCD90xxx Family Frequently Asked Questions and Answers (Rev. B) | 2019/4/12 | ||||
| 使用指南 | UCD90xxx Sequencer and System Health Controller PMBus™ Command Reference (Rev. G) | 2019/4/3 | ||||
| 使用指南 | UCD90xxx Sequencer Schematics Guidelines (Rev. C) | PDF | HTML | 2019/3/24 | |||
| 技術文章 | The need for sequencing in automotive applications | PDF | HTML | 2018/1/30 | |||
| 使用指南 | Fusion Digital Power Designer GUI 7.0 for the UCD90xxx Sequencer | 2017/5/31 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
UCD90SEQ48EVM-560 — 適用於 UCD9090 10 通道序列器和系統安全監控器的評估模組
UCD90SEQ48EVM-560 (EVM) 是完全組裝且經過測試的電路，附帶 48 針腳插座和介面電路。EVM 允許使用 UCD9090RGZ 10 通道序列器和系統安全監控器進行系統級開發。隨附 USB 傳輸線，可將 EVM 連接至操作 EVM GUI 的 PC。
FUSION_DIGITAL_POWER_DESIGNER — 數位電源軟體
Fusion Digital Power™ 圖形使用者介面 (GUI) 軟體用於配置和監控選擇的德州儀器數位電源控制器和序列器/健康狀態監控器。該應用程式使用 PMBus 協定，透過 TI USB 轉接器經由序列匯流排與裝置通訊。
FUSION_MFR_GUI — Fusion Digital Power 製造工具
The Fusion Digital Power Manufacturing Tool (aka MFR GUI) is a Graphical User Interface used to download firmware, upgrade firmware, configure, calibrate and test .
The MFR GUI supports the same devices as Fusion Digital Power Designer software. This tool is typically used in manufacturing (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RGZ) | 48 | Ultra Librarian |