首頁 電源管理 閘極驅動器 隔離式閘極驅動器
首頁
電源管理
閘極驅動器
隔離式閘極驅動器

UCC5871-Q1

現行

具備進階防護功能的車用 30-A 隔離式 5.7-kV VRMS IGBT/SiC MOSFET 閘極驅動器

立即訂購
產品規格表

UCC5871-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Isolation rating Reinforced Power switch IGBT, SiCFET Withstand isolation voltage (VISO) (Vrms) 5700 Working isolation voltage (VIOWM) (Vrms) 1500 Transient isolation voltage (VIOTM) (VPK) 8000 Peak output current (A) 30 Peak output current (source) (typ) (A) 30 Peak output current (sink) (typ) (A) 30 Features Active miller clamp, Fault reporting, Programmable dead time, SPI, Short circuit protection, Soft turn-off, Two-level turn-off Output VCC/VDD (min) (V) 15 Output VCC/VDD (max) (V) 30 Input supply voltage (min) (V) 3.3 Input supply voltage (max) (V) 5 Propagation delay time (µs) 0.15 Input threshold CMOS Operating temperature range (°C) -40 to 125 Rating Automotive Bootstrap supply voltage (max) (V) 2121 Rise time (ns) 150 Fall time (ns) 150 Undervoltage lockout (typ) (V) Programmable TI functional safety category Functional Safety-Compliant
Number of channels 1 Isolation rating Reinforced Power switch IGBT, SiCFET Withstand isolation voltage (VISO) (Vrms) 5700 Working isolation voltage (VIOWM) (Vrms) 1500 Transient isolation voltage (VIOTM) (VPK) 8000 Peak output current (A) 30 Peak output current (source) (typ) (A) 30 Peak output current (sink) (typ) (A) 30 Features Active miller clamp, Fault reporting, Programmable dead time, SPI, Short circuit protection, Soft turn-off, Two-level turn-off Output VCC/VDD (min) (V) 15 Output VCC/VDD (max) (V) 30 Input supply voltage (min) (V) 3.3 Input supply voltage (max) (V) 5 Propagation delay time (µs) 0.15 Input threshold CMOS Operating temperature range (°C) -40 to 125 Rating Automotive Bootstrap supply voltage (max) (V) 2121 Rise time (ns) 150 Fall time (ns) 150 Undervoltage lockout (typ) (V) Programmable TI functional safety category Functional Safety-Compliant
SSOP (DWJ) 36 131.84 mm² 12.8 x 10.3
  • Split output driver provides 30-A peak source and 30-A peak sink currents
  • Interlock and shoot-through protection with 150-ns(max) propagation delay and programmable minimum pulse rejection
  • Primary and secondary side active short circuit (ASC) support
  • Configurable power transistor protections
    • DESAT based short circuit protection
    • Shunt resistor based overcurrent and short circuit protection
    • NTC based overtemperature protection
    • Programmable soft turnoff (STO) and two-level turnoff (2LTOFF) during power transistor faults
  • Functional Safety-Compliant
  • Integrated diagnostics:
    • Built-in self test (BIST) for protection comparators
    • IN+ to transistor gate path integrity
    • Power transistor threshold monitoring
    • Internal clock monitoring
    • Fault alarm (nFLT1) and warning (nFLT2) outputs
  • Integrated 4-A active Miller clamp or optional external drive for Miller clamp transistor
  • Advanced high voltage clamping control
  • Internal and external supply undervoltage and overvoltage protection
  • Active output pulldown and default low outputs with low supply or floating inputs
  • Driver die temperature sensing and overtemperature protection
  • 100-kV/µs minimum common mode transient immunity (CMTI) at VCM = 1000 V
  • SPI based device reconfiguration, verification, supervision, and diagnosis
  • Integrated 10-bit ADC for power transistor temperature, voltage, and current monitoring
  • Split output driver provides 30-A peak source and 30-A peak sink currents
  • Interlock and shoot-through protection with 150-ns(max) propagation delay and programmable minimum pulse rejection
  • Primary and secondary side active short circuit (ASC) support
  • Configurable power transistor protections
    • DESAT based short circuit protection
    • Shunt resistor based overcurrent and short circuit protection
    • NTC based overtemperature protection
    • Programmable soft turnoff (STO) and two-level turnoff (2LTOFF) during power transistor faults
  • Functional Safety-Compliant
  • Integrated diagnostics:
    • Built-in self test (BIST) for protection comparators
    • IN+ to transistor gate path integrity
    • Power transistor threshold monitoring
    • Internal clock monitoring
    • Fault alarm (nFLT1) and warning (nFLT2) outputs
  • Integrated 4-A active Miller clamp or optional external drive for Miller clamp transistor
  • Advanced high voltage clamping control
  • Internal and external supply undervoltage and overvoltage protection
  • Active output pulldown and default low outputs with low supply or floating inputs
  • Driver die temperature sensing and overtemperature protection
  • 100-kV/µs minimum common mode transient immunity (CMTI) at VCM = 1000 V
  • SPI based device reconfiguration, verification, supervision, and diagnosis
  • Integrated 10-bit ADC for power transistor temperature, voltage, and current monitoring

The UCC5871-Q1 device is an isolated, highly configurable single-channel gate driver targeted to drive high power SiC MOSFETs and IGBTs in EV/HEV applications. Power transistor protections, such as shunt-resistor–based overcurrent, NTC-based overtemperature, and DESAT detection, include selectable soft turn-off or two-level turn-off during these faults. To further reduce the application size, the UCC5871-Q1 integrates a 4-A active Miller clamp during switching, and an active gate pulldown while the driver is unpowered. An integrated 10-bit ADC enables monitoring of up to six analog inputs and the gate driver temperature for enhanced system management. Diagnostics and detection functions are integrated to simplify the system design. The parameters and thresholds for these features are configurable using the SPI interface, which allows the device to be used with nearly any SiC MOSFET or IGBT.

The UCC5871-Q1 device is an isolated, highly configurable single-channel gate driver targeted to drive high power SiC MOSFETs and IGBTs in EV/HEV applications. Power transistor protections, such as shunt-resistor–based overcurrent, NTC-based overtemperature, and DESAT detection, include selectable soft turn-off or two-level turn-off during these faults. To further reduce the application size, the UCC5871-Q1 integrates a 4-A active Miller clamp during switching, and an active gate pulldown while the driver is unpowered. An integrated 10-bit ADC enables monitoring of up to six analog inputs and the gate driver temperature for enhanced system management. Diagnostics and detection functions are integrated to simplify the system design. The parameters and thresholds for these features are configurable using the SPI interface, which allows the device to be used with nearly any SiC MOSFET or IGBT.
filter 尋找其它 隔離式閘極驅動器
下載

索取更多資訊

提供 UCC5871-Q1 完整產品規格書、安全功能手冊、報告、分析報告及 FIT 率、FMD 和 Pin FMA 報告。立即索取

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能與所比較的裝置相似
UCC5880-Q1 現行 具有進階防護功能的車用、20A 即時可變 IGBT/SiC MOSFET 隔離式閘極驅動器 Functionally equivalent, two times the analog-to-digital convertor (ADC) channels, 20-A drive strength, CS/DESAT protection on the same pin, smaller package
UCC5881-Q1 現行 具有進階防護功能的車用、20A 即時可變 IGBT/SiC MOSFET 隔離式閘極驅動器 UCC5881-Q1 offers 3-level real-time variable gate drive strength for design optimization

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet UCC5871-Q1 30-A Isolated IGBT/SiC MOSFET Gate Driver with Advanced Protection Features for Automotive Applications datasheet PDF | HTML 2022年 12月 2日

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​