首頁 電源管理 AC/DC 切換穩壓器 AC/DC 轉換器
首頁
電源管理
AC/DC 切換穩壓器
AC/DC 轉換器

UCC28910

現行

具定電壓、定電流及一次側控制的 700V 返馳交換器

立即訂購
產品規格表

UCC28910

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Topology Buck, Flyback Iout (max) (A) 0.6 Vin (max) (V) 450 Vin (min) (V) 20 Vout (max) (V) 24 Vout (min) (V) 3.3 Features Current limiting, Green mode, High voltage startup, High-voltage startup, Input line monitor, Integrated Switch, Leading edge blanking, Light load efficiency, Light-load efficiency, Low power, Overcurrent protection, Soft start Control mode Current, Primary-side regulation, Voltage Switching frequency (min) (kHz) 0.42 Switching frequency (max) (kHz) 115 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 23500 Duty cycle (max) (%) 99
Rating Catalog Topology Buck, Flyback Iout (max) (A) 0.6 Vin (max) (V) 450 Vin (min) (V) 20 Vout (max) (V) 24 Vout (min) (V) 3.3 Features Current limiting, Green mode, High voltage startup, High-voltage startup, Input line monitor, Integrated Switch, Leading edge blanking, Light load efficiency, Light-load efficiency, Low power, Overcurrent protection, Soft start Control mode Current, Primary-side regulation, Voltage Switching frequency (min) (kHz) 0.42 Switching frequency (max) (kHz) 115 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 23500 Duty cycle (max) (%) 99
SOIC (D) 7 29.4 mm² (4.9 mm × 6 mm)
  • Constant-Voltage (CV) and Constant-Current (CC) Output Regulation Without Optical-Coupler
  • ±5% Output Voltage Regulation Accuracy
  • ±5% Output Current Regulation With AC Line and Primary Inductance Tolerance Compensation
  • 700-V Start-Up and Smart Power Management Enables <30-mW Standby Power
  • 115-kHz Maximum Switching Frequency Design for High-Power Density
  • Valley Switching and Frequency Dithering to Ease EMI Compliance
  • Thermal Shut Down
  • Low Line and Output Over-Voltage Protection
  • Constant-Voltage (CV) and Constant-Current (CC) Output Regulation Without Optical-Coupler
  • ±5% Output Voltage Regulation Accuracy
  • ±5% Output Current Regulation With AC Line and Primary Inductance Tolerance Compensation
  • 700-V Start-Up and Smart Power Management Enables <30-mW Standby Power
  • 115-kHz Maximum Switching Frequency Design for High-Power Density
  • Valley Switching and Frequency Dithering to Ease EMI Compliance
  • Thermal Shut Down
  • Low Line and Output Over-Voltage Protection

The UCC28910 and UCC28911 are high-voltage flyback switchers that provide output voltage and current regulation without the use of an optical coupler. Both devices incorporate a 700-V power FET and a controller that process operating information from the flyback auxiliary winding and power FET to provide a precise output voltage and current control. The integrated high-voltage current source for startup that is switched off during device operation, and the controller current consumption is dynamically adjusted with load. Both enable the very low stand-by power consumption.

Control algorithms in the UCC28910 and UCC28911, combining switching frequency and peak primary current modulation, allow operating efficiencies to meet or exceed applicable standards. Discontinuous conduction mode (DCM) with valley switching is used to reduce switching losses. Built-in protection features help to keep secondary and primary component stress levels in check across the operating range. The frequency jitter helps to reduce EMI filter

The UCC28910 and UCC28911 are high-voltage flyback switchers that provide output voltage and current regulation without the use of an optical coupler. Both devices incorporate a 700-V power FET and a controller that process operating information from the flyback auxiliary winding and power FET to provide a precise output voltage and current control. The integrated high-voltage current source for startup that is switched off during device operation, and the controller current consumption is dynamically adjusted with load. Both enable the very low stand-by power consumption.

Control algorithms in the UCC28910 and UCC28911, combining switching frequency and peak primary current modulation, allow operating efficiencies to meet or exceed applicable standards. Discontinuous conduction mode (DCM) with valley switching is used to reduce switching losses. Built-in protection features help to keep secondary and primary component stress levels in check across the operating range. The frequency jitter helps to reduce EMI filter
filter 尋找其它 AC/DC 轉換器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但針腳輸出與所比較的裝置不同。
UCG28826 現行 具有整合式 GaN (65W) 的自偏壓高頻 QR 返馳式轉換器 Higher output power capability with integrated GaN FET

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 15
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 UCC28910, UCC28911 High-Voltage Flyback Switcher with Primary-Side Regulation and Output Current Control datasheet (Rev. D) PDF | HTML 2016/12/19
技術文章 倒置降壓如何為非隔離式返馳提供拓撲替代方案 PDF | HTML Download English Version PDF | HTML 2024/3/20
應用說明 Flyback Aux Winding OVP and UVLO Fault Sensing Design and Troubleshooting Tips PDF | HTML 2021/8/31
技術文章 Overcoming common design challenges in an UV sterilization box system PDF | HTML 2020/7/27
白皮書 Power Electronics in Motor Drives: Where is it? (Rev. A) 2019/10/1
測試報告 PMP21384: Universal AC Input Integrated FET Buck Converter Reference Design 2018/6/19
技術文章 Making a solar inverter more reliable than the sun PDF | HTML 2017/8/1
技術文章 Powering the IoT PDF | HTML 2017/1/26
應用說明 Troubleshooting TI PSR controllers 2016/10/3
設計指南 Wi-Fi Enabled Level 1 Level 2 Electric Vehicle Service Equipment Design Guide 2016/8/16
應用說明 Non-Isolated High-Side Buck Converter With UCC28910 2016/6/1
白皮書 Redefining power management through high-voltage innovation 2015/11/12
白皮書 Control Challenges for Low Power AC/DC Converters 2015/10/2
白皮書 Control Challenges for Low Power AC/DC Converters (PPT) 2015/10/2
技術文章 Designing multiple output converters with primary side sensing PDF | HTML 2015/8/4

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

UCC28910FBEVM-526 — UCC28910FBEVM-526 評估模組

具有一次側控制功能的通用輸入 5V、6W 隔離式返馳電源供應器

使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

UCC28911EVM-718 — UCC28911 評估模組

UCC28911EVM-718 評估模組是一款離線返馳式電源供應器，可提供隔離式輸出電壓和電流穩壓，無需使用光耦合器和二次側回饋元件。輸入電壓範圍為 85VAC 至 265VAC，頻率範圍為47Hz 至 64Hz。評估模組使用 UCC28911 CV/CC PWM HV 切換器。此裝置整合 700 V 功率 MOSFET 和控制器，可處理來自輔助返馳式繞組和功率 MOSFET 的運作資訊，提供精密的輸出電壓和電流控制。UCC28911 中的控制算法使操作效率達到或超過適用標準。低系統零件數量和內置高級保護功能可帶來經濟高效的解決方案，滿足全球嚴格的能效要求。

使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
計算工具

SLUC503 — UCC28910 Design Calculator

支援產品和硬體

許多 TI 參考設計包含 UCC28910

使用我們的參考設計選擇工具，以檢視並找出最適合您的應用和參數的設計。
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 7 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片