首頁 電源管理 AC/DC 切換穩壓器 AC/DC 控制器

UCC28781

現行

具有整合式 SR 控制的高密度、零電壓切換 (ZVS) 返馳控制器

產品詳細資料

Topology Flyback Control mode Secondary-side regulation Features Adaptive burst mode, Overvoltage protection, SSR, Secondary-side regulated, USB C/PD compatible, X-capacitor discharge, Zero voltage switching
Topology Flyback Control mode Secondary-side regulation Features Adaptive burst mode, Overvoltage protection, SSR, Secondary-side regulated, USB C/PD compatible, X-capacitor discharge, Zero voltage switching
WQFN (RTW) 24 16 mm² (4 mm × 4 mm)
  • Switching frequency: > 500 kHz
  • Enables peak efficiency > 93 %
  • Enables < 45 mW stand-by power
  • Adaptive control for zero-voltage-switching (ZVS) and dead-time optimization
  • EMI frequency-dithering without trade-offs on transient response or audible noise
  • Programmable adaptive burst mode (ABM) with internal compensation
  • X-capacitor discharge capability
  • Over-temperature, overvoltage, output short-circuit, overcurrent, over-power, and pin-fault protections
  • Auto-recovery fault-responses
  • 4 mm × 4 mm, 24-pin, QFN package
  • Switching frequency: > 500 kHz
  • Enables peak efficiency > 93 %
  • Enables < 45 mW stand-by power
  • Adaptive control for zero-voltage-switching (ZVS) and dead-time optimization
  • EMI frequency-dithering without trade-offs on transient response or audible noise
  • Programmable adaptive burst mode (ABM) with internal compensation
  • X-capacitor discharge capability
  • Over-temperature, overvoltage, output short-circuit, overcurrent, over-power, and pin-fault protections
  • Auto-recovery fault-responses
  • 4 mm × 4 mm, 24-pin, QFN package

The UCC28781 is a zero-voltage-switching (ZVS) controller which can be used at very high switching frequencies to minimize the size of the transformer and enable high power density.

With direct synchronous rectifier (SR) control, the controller does not need a separate SR controller, as it can drive the SR FET directly to maximize efficiency and simplify design. (For isolated applications, an isolated gate-driver IC is required.)

Using adaptive dead-time control for ZVS, switching losses and EMI are minimized. This design results in a controller with extremely high conversion efficiency across the entire operating range.

The programmable adaptive burst mode (ABM) gives flexibility to control when the controller enters and exits standby mode to optimize standby power in light and no-load conditions. ABM also helps to reduce ripple and minimize audible noise.

The controller offers multiple protection modes with automatic restart (retry) responses.

The UCC28781 is a zero-voltage-switching (ZVS) controller which can be used at very high switching frequencies to minimize the size of the transformer and enable high power density.

With direct synchronous rectifier (SR) control, the controller does not need a separate SR controller, as it can drive the SR FET directly to maximize efficiency and simplify design. (For isolated applications, an isolated gate-driver IC is required.)

Using adaptive dead-time control for ZVS, switching losses and EMI are minimized. This design results in a controller with extremely high conversion efficiency across the entire operating range.

The programmable adaptive burst mode (ABM) gives flexibility to control when the controller enters and exits standby mode to optimize standby power in light and no-load conditions. ABM also helps to reduce ripple and minimize audible noise.

The controller offers multiple protection modes with automatic restart (retry) responses.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
具備升級功能,可直接投入使用替代所比較的裝置。
UCC28781-Q1 現行 具有整合式 SR 控制的汽車、高密度、零電壓切換 (ZVS) 返馳控制器 Automotive qualified version
功能相同,但針腳輸出與所比較的裝置不同。
UCC28782 現行 適用於主動鉗位 (ACF) 和零電壓開關 (ZVS) 拓撲的高密度返馳控制器 Active clamp flyback controller for higher power density and increased efficiency.
UCG28826 現行 具有整合式 GaN (65W) 的自偏壓高頻 QR 返馳式轉換器 Integrated GaN FET with quasi-resonant operation

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 4
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 UCC28781 Zero-Voltage-Switching Flyback Controller with Dedicated Synchronous Rectifier Gate-Drive datasheet PDF | HTML 2021/12/8
* 使用指南 Using the UCC28781EVM-053 Zero-Voltage-Switching Flyback Converter (Rev. A) PDF | HTML 2022/9/15
Application brief Flyback Selection Guide PDF | HTML 2022/6/23
證書 UCC28781EVM-053 EU RoHS Declaration of Conformity (DoC) 2021/8/19

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

UCC28781EVM-053 — 適用於車用 500-Vdc 輸入 ZVS 返馳電源供應器應用的 UCC28781-Q1 評估模組

UCC28781EMV-053 展示了使用零電壓切換返馳 (ZVSF) 控制器的 60-W、15-V 輸出的高效率,高密度,高壓汽車偏壓電源。 UCC28781-Q1 直接驅動一次側矽 MOSFET,並透過 UCC5304 絕緣式閘極驅動器驅動二次側同步整流器,以提升效率並達到 ZVS。

支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
參考設計

PMP23331 — 適合伺服器應用的 19-W、AC/DC 多輸出 5-V 與 12-V ZVS 返馳參考設計

此參考設計將通用 AC 輸入轉換為隔離式 12-V、1.5-A 輸出與隔離式 5-V、0.2-A 輸出。此設計的峰值效率達 92.7%。本參考設計具備 UCC28781-Q1,其為零電壓切換 (ZVS) 返馳式控制器,可將切換損失降到最低,而 UCC5350 是一款可驅動同步整流器 MOSFET 的強化型隔離式閘極驅動器,TPS629203 則為具低靜態電流的同步降壓轉換器。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RTW) 24 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片