計算工具
UCC28740
- Less than 10-mW No-Load Power Capability
- Optocoupled Feedback for CV, and
Primary-Side Regulation (PSR) for CC - Enables ±1% Voltage Regulation and ±5% Current Regulation Across Line and Load
- 700-V Startup Switch
- 100-kHz Maximum Switching Frequency Enables High-Power-Density Charger Designs
- Resonant-Ring Valley-Switching Operation for Highest Overall Efficiency
- Frequency Dithering to Ease EMI Compliance
- Clamped Gate-Drive Output for MOSFET
- Overvoltage, Low-Line, and Overcurrent Protection Functions
- SOIC-7 Package
- Create a Custom Design Using the UCC28740 With the WEBENCH® Power Designer
The UCC28740 isolated-flyback power-supply controller provides Constant-Voltage (CV) using an optical coupler to improve transient response to large-load steps. Constant-Current (CC) regulation is accomplished through Primary-Side Regulation (PSR) techniques. This device processes information from opto-coupled feedback and an auxiliary flyback winding for precise high-performance control of output voltage and current.
An internal 700-V startup switch, dynamically controlled operating states, and a tailored modulation profile support ultra-low standby power without sacrificing startup time or output transient response.
Control algorithms in the UCC28740 allow operating efficiencies to meet or exceed applicable standards. The drive output interfaces to a MOSFET power switch. Discontinuous conduction mode (DCM) with valley-switching reduces switching losses. Modulation of switching frequency and primary current-peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.
The controller has a maximum switching frequency of 100 kHz and always maintains control of the peak-primary current in the transformer. Protection features keep primary and secondary component stresses in check. A minimum switching frequency of 170 Hz facilitates the achievement of less than 10-mW no-load power.
您可能會感興趣的類似產品
可直接投入的替代產品，相較於所比較的裝置，具備升級功能
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 16 設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
UCC24630EVM-636 — UCC24630 65W AC/DC 變壓器
這是一款高效率 65W AC/DC 設計，採用 UCC24630 同步整流控制器，可實現通用輸入（85Vac 至 265Vac）至 19.5V @3.33A 輸出，超過 CoC-5 Tier2，以及外部電源供應器的 DOE Level VI 性能要求。
使用指南: PDF
開發板
UCC28740EVM-525 — UCC28740EVM-525 評估模組
UCC28740EVM-525 評估模組是一款 10W 離線不連續模式 (DCM) 返馳式轉換器，可提供定電壓 (CV) 和定電流 (CC) 輸出穩壓。其採用光學耦合器回饋以進行嚴格的電壓調節，改善對大負載步進的暫態響應能力與一次側控制技術，實現精確的定電流調節。UCC28740 在控制演算法中，運用頻率調變、一次側峰值電流調變、波谷切換及波谷略過，使整個操作範圍的效率達到最大值。
使用指南: PDF
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOIC (D) | 7 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。