首頁 電源管理 AC/DC 切換穩壓器 AC/DC 控制器

UCC28700

現行

具 PSR 和可編程纜線補償的定電壓、定電流 PWM

產品詳細資料

Topology Buck, Flyback Control mode Primary-side regulation Features CC/CV output regulation, Cable compensation, Current limiting, DCM, Leading edge blanking, Low power, Overcurrent protection, Primary-side regulated, Quasi-Resonant, Soft start, Valley switching Duty cycle (max) (%) 99 Sector Test & measurement
Topology Buck, Flyback Control mode Primary-side regulation Features CC/CV output regulation, Cable compensation, Current limiting, DCM, Leading edge blanking, Low power, Overcurrent protection, Primary-side regulated, Quasi-Resonant, Soft start, Valley switching Duty cycle (max) (%) 99 Sector Test & measurement
SOT-23 (DBV) 6 8.12 mm² (2.9 mm × 2.8 mm)
  • < 30-mW No-Load Power for 5-Star Rating
  • Primary-Side Regulation (PSR) Eliminates Opto-Coupler
  • ±5% Voltage and Current Regulation
  • 130-kHz Maximum Switching Frequency Enables High-Power
    Density Charger Designs
  • Quasi-Resonant Valley-Switching Operation for Highest
    Overall Efficiency
  • Patent-Pending Frequency-Jitter Scheme to Ease EMI
    Compliance
  • Wide VDD Range Allows Small Bias Capacitor
  • Clamped Gate-Drive Output for MOSFET
  • Protection Functions: Overvoltage, Low-Line, and
    Overcurrent
  • Programmable Cable Compensation (UCC28700 Only)
  • NTC Resistor Interface (UCC28701, UCC28702 and UCC28703
    Only) With Fixed Cable Compensation Options
  • SOT-23 Package
  • < 30-mW No-Load Power for 5-Star Rating
  • Primary-Side Regulation (PSR) Eliminates Opto-Coupler
  • ±5% Voltage and Current Regulation
  • 130-kHz Maximum Switching Frequency Enables High-Power
    Density Charger Designs
  • Quasi-Resonant Valley-Switching Operation for Highest
    Overall Efficiency
  • Patent-Pending Frequency-Jitter Scheme to Ease EMI
    Compliance
  • Wide VDD Range Allows Small Bias Capacitor
  • Clamped Gate-Drive Output for MOSFET
  • Protection Functions: Overvoltage, Low-Line, and
    Overcurrent
  • Programmable Cable Compensation (UCC28700 Only)
  • NTC Resistor Interface (UCC28701, UCC28702 and UCC28703
    Only) With Fixed Cable Compensation Options
  • SOT-23 Package

The UCC28700 family of flyback power supply controllers provides Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current. Low start-up current, dynamically controlled operating states and a tailored modulation profile support very low standby power without sacrificing start-up time or output transient response.

Control algorithms in the UCC28700 family allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a MOSFET power switch. Discontinuous Conduction Mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controllers have a maximum switching frequency of 130 kHz and always maintain control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28700 allows the level of cable compensation to be programmed. The UCC28701, UCC28702, and UCC28703 devices allow remote temperature sensing using a Negative Temperature Coefficient (NTC) resistor while providing fixed cable-compensation levels.

The UCC28700 family of flyback power supply controllers provides Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current. Low start-up current, dynamically controlled operating states and a tailored modulation profile support very low standby power without sacrificing start-up time or output transient response.

Control algorithms in the UCC28700 family allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a MOSFET power switch. Discontinuous Conduction Mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controllers have a maximum switching frequency of 130 kHz and always maintain control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28700 allows the level of cable compensation to be programmed. The UCC28701, UCC28702, and UCC28703 devices allow remote temperature sensing using a Negative Temperature Coefficient (NTC) resistor while providing fixed cable-compensation levels.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
具備升級功能,可直接投入使用替代所比較的裝置。
UCC28700-Q1 現行 具汽車級的小型一次側調節 PWM 控制器 Automotive qualified version

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

UCC28700EVM-068 — UCC28700 評估模組

德州儀器 UCC28700EVM-068 評估模組 (EVM) 可協助設計師評估具一次側調節的 UCC28700 定電壓、定電流 PWM 的性能。5W 評估模組用於評估 USB 應用的離線變壓器。 可將 90V RMS 至 265V RMS 輸入電壓轉換為 5V 直流電,具有 1A 電流限制,適用於 USB 變壓器應用。它旨在用於評估目的,而不是最終產品。
使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

UCC28711EVM-160 — UCC28711 評估模組

德州儀器 UCC28711EVM-160 評估模組 (EVM) 可協助設計師評估具一次側調節的 UCC28711 定電壓、定電流 PWM 的性能。5W 評估模組用於評估 USB 應用的離線變壓器。可將 90V RMS 至 265V RMS 輸入電壓轉換為 5VDC,具有 1A 電流限制,適用於 USB 變壓器應用。它旨在用於評估目的,而不是最終產品。
使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

UCC28720EVM-212 — 適用於 USB 離線適配器的 UCC28720EVM-212 5W 評估模組

UCC28720EVM-212 是一款 5W 評估模組,用於評估 USB 應用的離線轉接器。它旨在用於評估目的,而不是最終產品。UCC28720EVM-212 轉換器 100V 至 240V RMS 輸入電壓降至 5V DC,具有 1A 電流限制,適用於 USB 轉換器應用。
使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

UCC2870x PSPICE Transient Model

SLUM455.ZIP (131 KB) - PSpice 模型
支援產品和硬體
模擬型號

UCC2870x TINA-TI Transient Reference Design

SLUM619.TSC (195 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

UCC2870x TINA-TI Transient Spice Model

SLUM617.ZIP (101 KB) - TINA-TI Spice 模型
支援產品和硬體
計算工具

SLUC381 — MathCAD Design Tool

支援產品和硬體
計算工具

SLUC408 — UCC28700 Excel 97 Design Tool

支援產品和硬體

許多 TI 參考設計包含 UCC28700

使用我們的參考設計選擇工具,以檢視並找出最適合您的應用和參數的設計。

封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-23 (DBV) 6 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片