TXB0304
- Fully Symmetric Supply Voltages, 0.9 V to 3.6 V on A Port and 0.9 V to 3.6 V
- VCC Isolation Feature – If Either VCC Input is at GND, all Outputs are in High-Impedance State
- OE Input Circuit Referenced to VCCA
- Low Power Consumption, 5 µA Max (ICCA or ICCB)
- Ioff Supports Partial-Power-Down Mode Operation
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 22
- 8000-V Human-Body Model (A114-B)
- 1000-V Charged-Device Model (C101)
This 4-bit non-inverting translator uses two
separate configurable power-supply rails. The A port is designed to track
VCCA. VCCA accepts any supply voltage from 0.9 V to
3.6 V. The B port is designed to track VCCB. VCCB
accepts any supply voltage from
0.9 V to 3.6 V. This allows for low Voltage bidirectional translation between 1 V, 1.2 V, 1.5
V, 1.8 V, 2.5 V and 3.3 V voltage nodes. For the TXB0304, when the output-enable (OE) input is low,
all outputs are placed in the high-impedance state. To ensure the high-impedance state during power
up or power down, OE should be tied to GND through a pull-down resistor; the minimum value of the
resistor is determined by the current-sourcing capability of the driver. The OE device control pin
input circuit is supplied by VCCA. This device is fully specified for
partial-power-down applications using Ioff. The Ioff
circuitry disables the outputs, preventing damaging current backflow through the device when it is
powered down. The only difference between TXB0304 and TXBN0304 is the OE signal being active high
and active low respectively.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TXB0304 4-Bit Bidirectional Level-Shifter/Voltage Translator with Automatic Direction Sensing datasheet (Rev. G) | PDF | HTML | 2019/4/29 | ||
| 應用說明 | Overcoming TXB-Type Translators Design Challenges | PDF | HTML | 2024/9/18 | |||
| 應用說明 | Schematic Checklist - A Guide to Designing with Auto-Bidirectional Translators | PDF | HTML | 2024/7/12 | |||
| 應用說明 | Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A) | PDF | HTML | 2024/7/3 | |||
| 應用說明 | Leveraging Edge Rate Accelerators with Auto-Sensing Level Shifters | PDF | HTML | 2023/9/29 | |||
| 應用說明 | Do’s and Don’ts for TXB and TXS Voltage Level-Shifters with Edge Rate Accelerato | PDF | HTML | 2023/6/28 | |||
| 選擇指南 | Voltage Translation Buying Guide (Rev. A) | 2021/4/15 | ||||
| 技術文章 | How level shifters enable the transition to low-voltage processors in industrial e | PDF | HTML | 2016/9/22 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
14-24-NL-LOGIC-EVM — 適用於 14 針腳至 24 針腳無引線封裝的邏輯產品通用評估模組
14-24-NL-LOGIC-EVM 是一款靈活的評估模組 (EVM)，設計用於支援任何具有 14 針腳至 24 針腳 BQA、BQB、RGY、RSV、RJW 或 RHL 封裝的邏輯或轉換裝置。
TXB0304EVM — TXB0304 評估模組
The TXB0304 is a 4-bit voltage level translator for push-pull applications. The A port is designed to track VCCA. VCCA accepts any supply voltage from 0.9 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 0.9 V to 3.6 V. This allows for low-voltage (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| UQFN (RSV) | 16 | Ultra Librarian |
| UQFN (RUT) | 12 | Ultra Librarian |