首頁 介面 USB IC USB 轉接驅動器與多工器
首頁
介面
USB IC
USB 轉接驅動器與多工器

TUSB522P

現行

第四代雙通道 USB 3.0 轉接驅動器

立即訂購
產品規格表

TUSB522P

現行
產品規格表 立即訂購

產品詳細資料

Type Redriver Function USB 3.0 USB speed (Mbps) 5000 Number of channels 2 Input/output voltage (min) (V) 0.1 Input/output voltage (max) (V) 1.2 Configuration Dual-channel, Single-Port Features Dual Channel Single Port USB 3.0 Redriver with Ultra low-power architecture Rating Catalog Operating temperature range (°C) -40 to 85 Supply current (max) (µA) 98000 ESD HBM (typ) (kV) 2 Bandwidth (MHz) 2500
Type Redriver Function USB 3.0 USB speed (Mbps) 5000 Number of channels 2 Input/output voltage (min) (V) 0.1 Input/output voltage (max) (V) 1.2 Configuration Dual-channel, Single-Port Features Dual Channel Single Port USB 3.0 Redriver with Ultra low-power architecture Rating Catalog Operating temperature range (°C) -40 to 85 Supply current (max) (µA) 98000 ESD HBM (typ) (kV) 2 Bandwidth (MHz) 2500
VQFN (RGE) 24 16 mm² (4 mm × 4 mm)
  • USB3.1 GEN1 5Gbps, dual-channel re-driver with 3.3-V power supply
  • Ultra-low-power architecture:
    • Active: 98 mA
    • U2, U3: 1.2 mA
    • Disconnect 265 µA
    • Shutdown 60 µA
  • Optimal receiver equalization:
    • of 3, 6, 9 dB at 2.5 GHz
  • Output driver de-emphasis of 0, 3.5, and 6 dB
  • Automatic LFPS de-emphasis control to meet USB 3.1 certification requirements
  • No host or device-side requirement
  • Hot-plug capable
  • Industrial temperature range: –40°C to 85°C TUSB522PI
  • Commercial temperature range: 0°C to 70°C TUSB522P
  • USB3.1 GEN1 5Gbps, dual-channel re-driver with 3.3-V power supply
  • Ultra-low-power architecture:
    • Active: 98 mA
    • U2, U3: 1.2 mA
    • Disconnect 265 µA
    • Shutdown 60 µA
  • Optimal receiver equalization:
    • of 3, 6, 9 dB at 2.5 GHz
  • Output driver de-emphasis of 0, 3.5, and 6 dB
  • Automatic LFPS de-emphasis control to meet USB 3.1 certification requirements
  • No host or device-side requirement
  • Hot-plug capable
  • Industrial temperature range: –40°C to 85°C TUSB522PI
  • Commercial temperature range: 0°C to 70°C TUSB522P

The TUSB522P is a fourth generation, dual-channel, single-lane USB 3.1 GEN1 redriver and signal conditioner supporting 5Gbps. The device offers low power consumption on a 3.3 V supply with its ultra-low-power architecture. The redriver also supports the USB 3.1 low power modes, which further reduces idle power consumption.

The dual-channel capability enables the system to maintain signal integrity on both transmit and receive data paths. The receiver equalization has three gain settings to overcome channel degradation from insertion loss and inter-symbol interference. These settings are controlled from the EQ pins. To compensate for transmission line losses, the output driver supports configuration of De-Emphasis with pins DE. Additionally, automatic LFPS De-Emphasis control allows for full USB 3.1 compliance. These settings allow optimal performance, increased signaling distance, and flexibility in placement of the TUSB522P in the USB 3.1 GEN1 path.

The TUSB522P is a fourth generation, dual-channel, single-lane USB 3.1 GEN1 redriver and signal conditioner supporting 5Gbps. The device offers low power consumption on a 3.3 V supply with its ultra-low-power architecture. The redriver also supports the USB 3.1 low power modes, which further reduces idle power consumption.

The dual-channel capability enables the system to maintain signal integrity on both transmit and receive data paths. The receiver equalization has three gain settings to overcome channel degradation from insertion loss and inter-symbol interference. These settings are controlled from the EQ pins. To compensate for transmission line losses, the output driver supports configuration of De-Emphasis with pins DE. Additionally, automatic LFPS De-Emphasis control allows for full USB 3.1 compliance. These settings allow optimal performance, increased signaling distance, and flexibility in placement of the TUSB522P in the USB 3.1 GEN1 path.
filter 尋找其它 USB 轉接驅動器與多工器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
TUSB1104 現行 USB Type-C™ 10-Gbps 3.2 x2 自適應線性轉接驅動器 This product is a 3.2 x2 redriver that adds adaptive EQ
TUSB1004 現行 10 Gbps USB 3.2 4 通道適應性線性轉接驅動器 This product is a 4-channel 3.2 redriver with an the adaptive EQ

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 12
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TUSB522P 3.3 V Dual-Channel USB 3.1 GEN 1 Redriver, Equalizer datasheet (Rev. E) PDF | HTML 2023/11/1
應用說明 High-Speed Layout Guidelines for Signal Conditioners and USB Hubs (Rev. A) PDF | HTML 2026/1/8
應用說明 TUSB522P Schematic Checklist 2018/5/29
白皮書 Strengthening the USB Type-C signal chain through redrivers 2017/8/21
技術文章 How to deliver clean USB Type-C™ signals PDF | HTML 2017/8/7
技術文章 How to correct 10Gbps performance issues with a USB Type-C™ active redriver multip PDF | HTML 2016/12/1
技術文章 Why use a USB Type-C™ redriver in your personal electronics designs? PDF | HTML 2016/10/25
白皮書 Alternate Mode for USB Type-C™: Going Beyond USB 2016/9/26
應用說明 SN65LVPE502A to TUSB522P Change 2016/8/15
技術文章 How USB will enable the future of automotive infotainment PDF | HTML 2015/10/8
白皮書 Transition existing products from USB 2.0 OTG to USB Type-C 2015/7/10
白皮書 Low-cost implementation of USB Type-C 2015/7/7

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TUSB522PEVM — TUSB522P USB3.1 5 Gbps 雙通道訊號調節器評估模組

TUSB522P EVM 旨在提供 TUSB522P 裝置簡易的評估方式。同時也是一個參考設計，用以展示如何在量產系統中實際應用該裝置的範例。
使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TUSB522P IBIS-AMI Model

SLLM327.ZIP (2961 KB) - IBIS-AMI 模型
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGE) 24 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片