TUSB212-Q1
- Qualified for Automotive Applications:
- Device Temperature Grade 2: –40°C to 105°C Ambient Operating Temperature
- Device HBM Classification Level H1C
- Device CDM Classification Level C3
- Compatible with USB 2.0, OTG 2.0 and BC 1.2
- Pin strap or I2C configurable
- Support for LS, FS, HS signaling
- Ultra-low USB Disconnect and Shutdown Power Consumption
- Selectable Signal Gain Via Daisy Chain Device for High Loss Applications
- D1P/M and D2P/M Interchangeable and Host/Device Agnostic
- Supports up to 5m pre-channel or 2m post-channel Cable
Length
- Four Selectable AC Boost Settings Via External Pulldown Resistor
- DC Boost Along With AC Boost for Best Signal Integrity
The TUSB212-Q1 is a USB High-Speed (HS) signal conditioner, designed to compensate for ISI signal loss in a transmission channel.
TUSB212-Q1 has a patent-pending design which is agnostic to USB Low Speed (LS) and Full Speed (FS) signals. LS and FS signal characteristics are unaffected by the TUSB212-Q1 while HS signals are compensated.
Programmable signal AC boost and DC boost permits fine tuning device performance to optimize High Speed signals at the connector. This helps to pass USB High Speed electrical compliance tests.
In addition, TUSB212-Q1 is compatible with the USB On-The-Go (OTG) and Battery Charging (BC) protocols.
您可能會感興趣的類似產品
針腳對針腳的功能與所比較的裝置相同。
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 6
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TUSB212-Q1 USB 2.0 High Speed Signal Conditioner datasheet | PDF | HTML | 2017/8/17 | ||
| 白皮書 | Strengthening the USB Type-C signal chain through redrivers | 2017/8/21 | ||||
| 技術文章 | How to deliver clean USB Type-C™ signals | PDF | HTML | 2017/8/7 | |||
| 技術文章 | How USB will enable the future of automotive infotainment | PDF | HTML | 2015/10/8 | |||
| 白皮書 | Transition existing products from USB 2.0 OTG to USB Type-C | 2015/7/10 | ||||
| 白皮書 | Low-cost implementation of USB Type-C | 2015/7/7 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
參考設計
TIDA-01432 — 具有充電和強化資料路徑性能的車用被動式媒體中心參考設計
此車用參考設計展示了需要資料傳輸之媒體連接埠的獨特方法。該設計能夠透過 15W USB Type-C™ 連接埠支援 USB 2.0。客戶可利用完整參考設計來加快其媒體埠系統的開發，該設計包含經 CISPR-25 類別 5 測試並符合 AEC-Q100 規範的類比積體電路 (IC)。此參考設計透過靈活的被動式解決方案，讓系統能與主機角色互換，並以小型 1×2 吋解決方案為 USB Type-C 與傳統裝置充電，進而降低開發成本與時間。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| X2QFN (RWB) | 12 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。