TUSB212
- Compatible with USB 2.0, OTG 2.0 and BC 1.2
- Pin strap or I2C configurable
- Support for LS, FS, HS signaling
- Ultra-low USB Disconnect and Shutdown Power Consumption
- Selectable Signal Gain Via Daisy Chain Device for High Loss Applications
- D1P/M and D2P/M Interchangeable and Host/Device Agnostic
- Supports up to 5m pre-channel or 2m post-channel Cable
Length
- Four Selectable AC Boost Settings Via External Pulldown Resistor
- DC Boost Along With AC Boost for Best Signal Integrity
The TUSB212 is a USB High-Speed (HS) signal conditioner, designed to compensate for ISI signal loss in a transmission channel.
TUSB212 has a patent-pending design which is agnostic to USB Low Speed (LS) and Full Speed (FS) signals. LS and FS signal characteristics are unaffected by the TUSB212 while HS signals are compensated.
Programmable signal AC boost and DC boost permits fine tuning device performance to optimize High Speed signals at the connector. This helps to pass USB High Speed electrical compliance tests.
In addition, TUSB212 is compatible with the USB On-The-Go (OTG) and Battery Charging (BC) protocols.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 13
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TUSB212 USB 2.0 High Speed Signal Conditioner datasheet (Rev. A) | PDF | HTML | 2017/8/31 | ||
| 應用說明 | High-Speed Layout Guidelines for Signal Conditioners and USB Hubs (Rev. A) | PDF | HTML | 2026/1/8 | |||
| 應用說明 | Solving Signal Integrity Challenges with USB2 Redrivers (Rev. A) | PDF | HTML | 2024/8/26 | |||
| 應用說明 | TUSB21xx High-Speed Signal Quality Test Modes | PDF | HTML | 2022/8/8 | |||
| 使用指南 | TUSB211 to TUSB216I Transition Guide | PDF | HTML | 2021/5/25 | |||
| 應用說明 | TUSB2XX implementation guide | 2018/5/29 | ||||
| 應用說明 | TUSB212 Schematic Checklist | 2018/4/16 | ||||
| 技術文章 | How to select the right USB Type-C™ signal switches | PDF | HTML | 2018/3/20 | |||
| 應用說明 | TUSB211 to TUSB212 Changes | 2017/9/18 | ||||
| 白皮書 | Strengthening the USB Type-C signal chain through redrivers | 2017/8/21 | ||||
| 使用指南 | TUSB212 Evaluation Module | 2017/8/8 | ||||
| 技術文章 | How to deliver clean USB Type-C™ signals | PDF | HTML | 2017/8/7 | |||
| 技術文章 | How USB will enable the future of automotive infotainment | PDF | HTML | 2015/10/8 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TUSB1044RNQEVM — USB Type-C 替代模式訊號轉接驅動器達 10G 評估模組
TUSB1044 是 USB Type-C Alt Mode 轉接驅動器開關，支援高達 10 Gbps 的資料傳輸速率。這款與通訊協定無關的線性重新驅動程式能支援 USB Type-C Alt Mode 介面，包括 DisplayPort。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| X2QFN (RWB) | 12 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。