首頁 交換器與多工器 類比交換器與多工器 類比與精密開關與多工器
首頁
交換器與多工器
類比交換器與多工器
類比與精密開關與多工器

TS5A23157-Q1

現行

車用、5V、2:1 (SPDT) 單通道類比開關

立即訂購
產品規格表

TS5A23157-Q1

現行
產品規格表 立即訂購

產品詳細資料

Configuration 2:1 SPDT Number of channels 2 Power supply voltage - single (V) 1.8, 2.5, 3.3, 5 Protocols Analog, I2C, LVDS, UART Ron (typ) (Ω) 15 CON (typ) (pF) 17.5 ON-state leakage current (max) (µA) 1 Supply current (typ) (µA) 0.01 Bandwidth (MHz) 220 Operating temperature range (°C) -40 to 125 Features Break-before-make Input/output continuous current (max) (A) 0.05 TI functional safety category Functional Safety-Capable Rating Automotive Drain supply voltage (max) (V) 5.5
Configuration 2:1 SPDT Number of channels 2 Power supply voltage - single (V) 1.8, 2.5, 3.3, 5 Protocols Analog, I2C, LVDS, UART Ron (typ) (Ω) 15 CON (typ) (pF) 17.5 ON-state leakage current (max) (µA) 1 Supply current (typ) (µA) 0.01 Bandwidth (MHz) 220 Operating temperature range (°C) -40 to 125 Features Break-before-make Input/output continuous current (max) (A) 0.05 TI functional safety category Functional Safety-Capable Rating Automotive Drain supply voltage (max) (V) 5.5
VSSOP (DGS) 10 14.7 mm² (3 mm × 4.9 mm)
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C
    • Device HBM ESD classification level H2
    • Device CDM ESD classification level C4B
  • Functional safety-capable
    • Documentation available to aid functional safety system design
  • Customer-specific configuration control can be supported along with major-change approval
  • Specified break-before-make switching
  • Low ON-state resistance (15 Ω)
  • Control inputs are 5-V tolerant
  • Low charge injection
  • Excellent ON-resistance matching
  • Low total harmonic distortion
  • 1.8-V to 5.5-V single-supply operation
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C
    • Device HBM ESD classification level H2
    • Device CDM ESD classification level C4B
  • Functional safety-capable
    • Documentation available to aid functional safety system design
  • Customer-specific configuration control can be supported along with major-change approval
  • Specified break-before-make switching
  • Low ON-state resistance (15 Ω)
  • Control inputs are 5-V tolerant
  • Low charge injection
  • Excellent ON-resistance matching
  • Low total harmonic distortion
  • 1.8-V to 5.5-V single-supply operation

The TS5A23157-Q1 is a dual, single-pole, double-throw (SPDT) analog switch designed to operate from 1.65 V to 5.5 V. This device can handle both digital and analog signals. The device can transmit signals up to 5.5 V (peak) in either direction.

For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI Web site at www.ti.com.

The TS5A23157-Q1 is a dual, single-pole, double-throw (SPDT) analog switch designed to operate from 1.65 V to 5.5 V. This device can handle both digital and analog signals. The device can transmit signals up to 5.5 V (peak) in either direction.

For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI Web site at www.ti.com.
filter 尋找其它 類比與精密開關與多工器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 6
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TS5A23157-Q1 Dual 15-Ω SPDT Analog Switch datasheet (Rev. B) PDF | HTML 2021/6/17
Product overview How to Support Two Controllers on the I2C Bus, Avoid Bus Contention, and Prevent Controller Failures PDF | HTML 2024/11/27
應用說明 Selecting the Correct Texas Instruments Signal Switch (Rev. E) PDF | HTML 2022/6/2
應用說明 Multiplexers and Signal Switches Glossary (Rev. B) PDF | HTML 2021/12/1
功能安全資訊 TS5A23157-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2021/3/29
更多文件說明 Automotive Logic Devices Brochure 2014/8/27

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

介面轉接器

LEADED-ADAPTER1 — 適用於快速測試 TI 的 5、8、10、16 及 24 針腳引線封裝的表面貼裝至 DIP 接頭適配器

EVM-LEADED1 板可用於快速測試和搭建 TI 常見的有引腳封裝  此電路板具備板上配置，可將 TI 的 D、DBQ、DCT、DCU、DDF、DGS、DGV 和 PW 表面黏著封裝轉換為 100mil DIP 排針。     

使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TS5A23157 IBIS Model

SCEM497.ZIP (92 KB) - IBIS 模型
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSSOP (DGS) 10 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片