TPS7A94
- Ultra-low output noise:
- 0.46 µV RMS (typ, 10 Hz to 100 kHz)
- High power-supply ripple
rejection (PSRR):
- 102 dB at 100Hz
- 110 dB at 1 kHz
- 95 dB at 10 kHz
- 78 dB at 100 kHz
- 50 dB at 1 MHz
- Accuracy over line, load, and temperature: 1%
- Low dropout: 150 mV at 1 A
- Wide input voltage range: 1.7 V to 5.7 V
- Wide output voltage range: 0 V to 5.5 V
- Parallelable for lower noise and higher current
- Fast transient response
- Precision enable and UVLO
- Programmable current limit
- Programmable PG threshold
- Adjustable start-up inrush control
- Open-drain, power-good (PG) output
- Package: 3.00-mm × 3.00-mm,
10-pin WSON:
- JEDEC R θJA: 46.1°C/W
- EVM R θJA: 25.6°C/W
The TPS7A94 is an ultra-low-noise (0.46 µV RMS), low-dropout (LDO) voltage regulator capable of sourcing 1 A with only 150 mV of dropout. The low dropout, in conjunction with a wide bandwidth error amplifier, allows for very high PSRR (110 dB at 1 kHz and 50 dB at 1 MHz) under low operating headroom (500 mV) and high output current (750 mA).
The device output is adjustable from 0 V to 5.5 V with an external resistor. With the wide input voltage range, the device supports operation as low as 1.7 V and up to 5.7 V. The device includes programmable current limit, programmable PG threshold, and precision enable, allowing better control in the application.
With the high-accuracy reference and wide-bandwidth topology, the device can be easily paralleled to achieve lower noise and higher current.
With 1% output voltage accuracy (over line, load, and temperature) and soft-start capabilities to reduce inrush current, the device is an excellent choice for powering sensitive analog low-voltage devices.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
LMX2594PSEVM — 適用於 15-GHz 射頻合成器及多裝置相位同步的 LMX2594 評估模組
LMX2594 評估模組 (EVM) 是用於評估 LMX2594 寬頻 RF 合成器的相位同步 (PS) 功能的平台。LMX2594PSEVM 包含兩個共用相同參考時鐘的 LMX2594 零件。
在相位同步後可測量並比較零件輸出的相位。EVM 還包含射頻 (RF) 功率合成器,可用於將兩個相位同步的輸出結合到單一輸出,同時降低相位雜訊。
TPS7A94EVM-046 — 適用於 1-A、超低雜訊、超高 PSRR、射頻電壓穩壓器的 TPS7A94 評估模組
TPS7A94 評估模組 (EVM) 可協助設計工程師評估 TPS7A94 線性穩壓器的運作及性能,以在其本身電路應用中使用。此 EVM 配置包含適合各種廣泛應用的單一低雜訊、小尺寸、線性穩壓器。
穩壓器能以低 VIN 至 VOUT 壓降電壓為負載提供最高 1A。爲了保持穩定,請使用 4.7 μF (或更大) 的最小降額輸出電容,最高可達 1 mF。
PARALLEL-LDO-CALC — Parallel low-dropout (LDO) calculator
並聯低壓差 (LDO) 計算器是以 Microsoft® Excel® 為基礎的工具,可為使用鎮流器電阻器的並聯 LDO 穩壓器提供最壞情況分析。此工具可幫助使用者判斷所需的並聯 LDO 穩壓器最小數量,以及適合系統要求集的最佳鎮流器電阻。
在並聯應用中使用的常用 LDO 穩壓器的產品規格書資訊會預先填入計算機中。使用者可根據自己的系統需求,評估最符合其系統需求的 LDO 穩壓器裝置。
TIDA-010256 — 128 通道超音波發射器系統參考設計
TIDA-010962 — 自動測試設備 (ATE) 80V 離散式浮動 VI 參考設計
此參考設計展現四象限離散式浮動電壓與電流 (VI) 設計。電壓輸出支援 ±40V 和 0V 至 80V 範圍,並提供 500mA、10mA 和 10μA 三種電流範圍。此設計可在強制電壓 (FV)、強制電流 (FI)、緩衝器及具有類比回饋迴路的 Gang 模式下運作。憑藉 20 位元強制數位轉類比轉換器 (DAC) 和 18 位元、2 通道類比轉數位轉換器 (ADC) 以及精密訊號鏈,該參考設計可實現校準後控制與測量具備 0.01% 準確度。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WSON (DSC) | 10 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。