首頁 電源管理 線性與低壓差 (LDO) 穩壓器

TPS7A85

現行

具有高準確度且具有電源良好功能的 4-A、低 VIN、低雜訊、超低壓差電壓穩壓器

現在提供此產品的更新版本

open-in-new 比較替代產品
可直接投入的替代產品,相較於所比較的裝置,具備升級功能
TPS7A85A 現行 具有電源良好功能的 4-A、低 VIN (1.1-V)、低雜訊、高準確度、超低壓差電壓穩壓器 4-A LDO regulator with excellent accuracy (0.75%). This is an improved pin-to-pin upgrade.

產品詳細資料

Rating Catalog Vin (max) (V) 6.5 Vin (min) (V) 1.1 Iout (max) (A) 4 Output options Adjustable Output, Fixed Output Vout (max) (V) 5 Vout (min) (V) 0.8 Noise (µVrms) 4.4 PSRR at 100 KHz (dB) 25 Iq (typ) (mA) 2.8 Features Enable, Output discharge, Power good, Soft start Thermal resistance θJA (°C/W) 35.4 Load capacitance (min) (µF) 47 Regulated outputs (#) 1 Accuracy (%) 1 Dropout voltage (Vdo) (typ) (mV) 150 Operating temperature range (°C) -40 to 125
Rating Catalog Vin (max) (V) 6.5 Vin (min) (V) 1.1 Iout (max) (A) 4 Output options Adjustable Output, Fixed Output Vout (max) (V) 5 Vout (min) (V) 0.8 Noise (µVrms) 4.4 PSRR at 100 KHz (dB) 25 Iq (typ) (mA) 2.8 Features Enable, Output discharge, Power good, Soft start Thermal resistance θJA (°C/W) 35.4 Load capacitance (min) (µF) 47 Regulated outputs (#) 1 Accuracy (%) 1 Dropout voltage (Vdo) (typ) (mV) 150 Operating temperature range (°C) -40 to 125
VQFN (RGR) 20 12.25 mm² 3.5 x 3.5
  • Low Dropout: 150 mV (typ) at 4 A
  • 1% (max) Accuracy Over Line, Load, and Temperature
  • Output Voltage Noise:
    • 4.4 µVRMS at 0.8-V Output
    • 8.4 µVRMS at 5.0-V Output
  • Input Voltage Range:
    • Without BIAS: 1.4 V to 6.5 V
    • With BIAS: 1.1 V to 6.5 V
  • ANY-OUT Operation:
    • Output Voltage Range: 0.8 V to 3.95 V
  • Adjustable Operation:
    • Output Voltage Range: 0.8 V to 5.0 V
  • Power-Supply Ripple Rejection:
    • 40 dB at 500 kHz
  • Excellent Load Transient Response
  • Adjustable Soft-Start In-Rush Control
  • Open-Drain Power-Good (PG) Output
  • Stable with a 47-µF or Larger Ceramic Output Capacitor
  • Operating Temperature Range:
    –40ºC to +125°C
  • 3.5-mm × 3.5-mm, 20-Pin VQFN
  • Low Dropout: 150 mV (typ) at 4 A
  • 1% (max) Accuracy Over Line, Load, and Temperature
  • Output Voltage Noise:
    • 4.4 µVRMS at 0.8-V Output
    • 8.4 µVRMS at 5.0-V Output
  • Input Voltage Range:
    • Without BIAS: 1.4 V to 6.5 V
    • With BIAS: 1.1 V to 6.5 V
  • ANY-OUT Operation:
    • Output Voltage Range: 0.8 V to 3.95 V
  • Adjustable Operation:
    • Output Voltage Range: 0.8 V to 5.0 V
  • Power-Supply Ripple Rejection:
    • 40 dB at 500 kHz
  • Excellent Load Transient Response
  • Adjustable Soft-Start In-Rush Control
  • Open-Drain Power-Good (PG) Output
  • Stable with a 47-µF or Larger Ceramic Output Capacitor
  • Operating Temperature Range:
    –40ºC to +125°C
  • 3.5-mm × 3.5-mm, 20-Pin VQFN

The TPS7A85 is a low-noise (4.4 µVRMS), low-dropout linear regulator (LDO) capable of sourcing 4 A with only 240 mV of maximum dropout. The device output voltage is pin-programmable from 0.8 V to 3.95 V and adjustable from 0.8 V to 5.0 V using an external resistor divider.

The combination of low-noise (4.4 µVRMS), high-PSRR, and high output current capability makes the TPS7A85 ideal to power noise-sensitive components such as those found in high-speed communications, video, medical, or test and measurement applications. The high performance of the TPS7A85 limits power-supply-generated phase noise and clock jitter, making this device ideal for powering high-performance serializer and deserializer (SerDes), analog-to-digital converters (ADCs), digital-to-analog converters (DACs), and RF components. Specifically, RF amplifiers benefit from the high-performance and 5.0-V output capability of the device.

For digital loads [such as application-specific integrated circuits (ASICs), field-programmable gate arrays (FPGAs), and digital signal processors (DSPs)] requiring low-input voltage, low-output (LILO) voltage operation, the exceptional accuracy (0.75% over load and temperature), remote sensing, excellent transient performance, and soft-start capabilities of the TPS7A85 ensure optimal system performance.

The versatility of the TPS7A85 makes the device a component of choice for many demanding applications.

The TPS7A85 is a low-noise (4.4 µVRMS), low-dropout linear regulator (LDO) capable of sourcing 4 A with only 240 mV of maximum dropout. The device output voltage is pin-programmable from 0.8 V to 3.95 V and adjustable from 0.8 V to 5.0 V using an external resistor divider.

The combination of low-noise (4.4 µVRMS), high-PSRR, and high output current capability makes the TPS7A85 ideal to power noise-sensitive components such as those found in high-speed communications, video, medical, or test and measurement applications. The high performance of the TPS7A85 limits power-supply-generated phase noise and clock jitter, making this device ideal for powering high-performance serializer and deserializer (SerDes), analog-to-digital converters (ADCs), digital-to-analog converters (DACs), and RF components. Specifically, RF amplifiers benefit from the high-performance and 5.0-V output capability of the device.

For digital loads [such as application-specific integrated circuits (ASICs), field-programmable gate arrays (FPGAs), and digital signal processors (DSPs)] requiring low-input voltage, low-output (LILO) voltage operation, the exceptional accuracy (0.75% over load and temperature), remote sensing, excellent transient performance, and soft-start capabilities of the TPS7A85 ensure optimal system performance.

The versatility of the TPS7A85 makes the device a component of choice for many demanding applications.

下載 觀看有字幕稿的影片 影片

查看 TI.com 庫存中的類似產品

規格相似的產品依可用的 TI.com 庫存排序。

立即檢視

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 8
類型 標題 日期
* Data sheet TPS7A85 High-Current (4 A), High-Accuracy (1%), Low-Noise (4.4 µVRMS), LDO Voltage Regulator datasheet (Rev. A) PDF | HTML 2016年 2月 5日
White paper Parallel LDO Architecture Design Using Ballast Resistors PDF | HTML 2022年 12月 14日
White paper Comprehensive Analysis and Universal Equations for Parallel LDO's Using Ballast PDF | HTML 2022年 12月 13日
Selection guide Low Dropout Regulators Quick Reference Guide (Rev. P) 2018年 3月 21日
Technical article LDO basics: noise – how a noise-reduction pin improves system performance PDF | HTML 2017年 6月 14日
Technical article Optimizing LDO voltage accuracy PDF | HTML 2016年 5月 6日
Technical article Keep it simple with an LDO regulator PDF | HTML 2016年 4月 29日
EVM User's guide TPS7A85EVM-754 Evaluation Module User's Guide 2016年 2月 29日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DAC38RF80EVM — DAC38RF80 雙通道、14 位元、9GSPS、6x-24x 內插、6 和 9GHz PLL DAC 評估模組

DAC38RF80EVM 是用於評估 DAC38RF80/84/90 數位類比轉換器 (DAC) 的電路板。EVM 可用於評估高達 9GSPS 取樣率的 DAC 性能。此設計可搭配基於 FPGA 的圖型產生器卡 TSW14J56EVM(Rev B 及以上版本)協同運作。EVM 中提供的 FMC 連接器亦可將 DAC 與第三方廠商的 FPGA 開發板進行介接。同時提供易於使用的軟體介面,可透過 SPI 控制 DAC 與板載的 LMK04828 時鐘晶片。

使用指南: PDF
TI.com 無法提供
開發板

DAC38RF82EVM — DAC38RF82 雙通道、14 位元、9 GSPS、1x-24x 內插、6 和 9 GHz PLL DAC 評估模組

DAC38RF82EVM 是用於評估 DAC38RF82/83/85/93 數位類比轉換器 (DAC) 的電路板。EVM 可用於評估取樣率高達 9GSPS 的 DAC 性能,其設計需與 TSW14J56 EVM 搭配使用。提供的 FMC 連接器亦可將 DAC 與第三方廠商的 FPGA 開發板進行介接。同時提供易於使用的軟體介面,可透過 SPI 控制 DAC 與板載的 LMK04828 時鐘晶片。
使用指南: PDF
TI.com 無法提供
開發板

DAC38RF89EVM — DAC38RF89 雙通道、14 位元、8.4 GSPS、1x-24x 內插、5 和 7.5 GHz PLL DAC 評估模組

DAC38RF89 評估模組 (EVM) 是用於評估 DAC38RF89 數位類比轉換器 (DAC) 的電路板。DAC38RFEVM 可用於評估取樣率高達 9GSPS 的 DAC 性能,其設計需與 TSW14J56EVM(Rev B 及以上版本)搭配使用。提供的 FMC 連接器亦可將 DAC 與第三方廠商的 FPGA 開發板進行介接。同時提供易於使用的軟體介面,可透過 SPI 控制 DAC 與板載的 LMK04828 時脈晶片。

使用指南: PDF
TI.com 無法提供
開發板

TPS7A85EVM-754 — TPS7A85 4A 高電流、1% 高準確度、4.4μVRMS LDO 穩壓器評估模組

TPS7A85EVM-754 評估模組為典型配置設計,用於評估 TPS7A85 的運作和性能,其為高電流 4-A 低壓差電壓穩壓器。  EVM 電路板主要配置爲參考設計,可供需要高達 4 A 動態負載電流的工程應用。
使用指南: PDF
TI.com 無法提供
開發板

TSW40RF80EVM — 具有雙通道 14 位元 3 GSPS ADC/9 GSPS DAC 時鐘解決方案的 2T2R 射頻取樣收發器評估模組

TSW40RF80 評估模組 (EVM) 是二發射二接收 (2T2R) 射頻取樣收發器參考設計。本模組包含 DAC38RF80 雙通道射頻取樣數位轉類比轉換器 (DAC) 及 ADC32RF45 雙通道射頻取樣類比轉數位轉換器 (ADC)。

DAC38RF80 取樣率最高可運作 9 GSPS,包括用於產生高頻時鐘的板載 PLL/VCO。輸出為單端,可輕鬆從介面連接 50-Ω 電路。ADC32RF45 取樣率最高可運作 3 GSPS。可選擇在各通道中使用雙數位降壓轉換器,或繞過轉換器以存取完整 Nyquist 頻寬。

TSW40RF80EVM 包含 LMK04828 時脈產生器,用於為 DAC (...)

使用指南: PDF
TI.com 無法提供
模擬型號

TPS7A85 PSpice Transient Model

SBVM573.ZIP (77 KB) - PSpice Model
模擬型號

TPS7A85 Unencrypted PSpice Transient Model

SBVM572.ZIP (3 KB) - PSpice Model
計算工具

PARALLEL-LDO-CALC Parallel low-dropout (LDO) calculator

The parallel low-dropout (LDO) calculator is a Microsoft® Excel®-based tool that provides worst-case analysis for parallel LDO regulators using ballast resistors. The tool helps the user identify the minimum number of parallel LDO regulators required and optimum ballast resistance for a (...)

支援產品和硬體

支援產品和硬體

產品
線性與低壓差 (LDO) 穩壓器
TPS7A33 具啟用功能的 1A、高 PSRR、負可調式超低壓差電壓穩壓器 TPS7A47 具有啟用功能的 1A、36V、低雜訊、高 PSRR、低壓差電壓穩壓器 TPS7A47-Q1 具有啟用功能的汽車 1-A、36-V、低雜訊、高 PSRR、低壓差電壓穩壓器 TPS7A4701-EP 強化型 36-V、1-A、4-μVRMS、RF LDO 電壓穩壓器 TPS7A52 2-A、低 VIN (1.1-V)、低雜訊、高準確度、超低壓差 (LDO) 電壓穩壓器 TPS7A52-Q1 車用 2-A、低 VIN (1.1-V)、低雜訊、高準確度、低壓降 (LDO) 電壓穩壓器 TPS7A53 3-A、低輸入電壓 (1.1 V) 低雜訊高準確度超低壓差 (LDO) 電壓穩壓器 TPS7A53-Q1 車用、3-A、低 VIN (1.1 V) 低雜訊高準確度超低壓差 (LDO) 電壓穩壓器 TPS7A53A-Q1 車用 3-A、低 VIN 5.6-µVRMS 低雜訊高準確度低壓降電壓穩壓器 TPS7A53B 具有 0.5-V 低 VREF 的 3-A、1.1-V、低 VIN、低雜訊高準確度、超低壓降電壓穩壓器 TPS7A54 4-A、低 VIN (1.1-V)、低雜訊、高準確度、超低壓差 (LDO) 電壓穩壓器 TPS7A54-Q1 車用 4-A、低 VIN (1.1-V)、低雜訊、高準確度、低壓差 (LDO) 電壓穩壓器 TPS7A57 5-A、低輸入電壓、低雜訊、高準確度、低壓差 (LDO) 電壓穩壓器 TPS7A83A 具有電源良好功能的 2-A、低 VIN (1.1-V)、低雜訊、高準確度、超低壓差電壓穩壓器 TPS7A84A 具有電源良好功能的 3-A、低 VIN (1.1-V)、低雜訊、高準確度、超低壓差電壓穩壓器 TPS7A85A 具有電源良好功能的 4-A、低 VIN (1.1-V)、低雜訊、高準確度、超低壓差電壓穩壓器 TPS7A94 1-A、超低雜訊、超高 PSRR、射頻電壓穩壓器 TPS7B7702-Q1 汽車 300-mA、無電池 (40-V)、雙通道可調整天線低壓差電壓穩壓器 TPS7A8300 2-A、低 VIN、低 2-A、低 VIN、低雜訊、超低壓降電壓穩壓器具有高準確度、低雜訊的良好電源,超低壓降電壓穩壓器具有高準確度的良好電源 TPS7A84 具有高準確度且具有電源良好功能的 3-A、低 VIN、低雜訊、超低壓差電壓穩壓器 TPS7A85 具有高準確度且具有電源良好功能的 4-A、低 VIN、低雜訊、超低壓差電壓穩壓器 TPS7A96 2-A、超低雜訊、超高 PSRR 射頻電壓穩壓器 TPS7A4501-SP 抗輻射、QMLV、1.5-V 至 20-V 輸入 1.5-A 低壓降 (LDO) 穩壓器 TPS7H1111-SP 抗輻射、QMLV 和 QMLP、1.5A、超低雜訊高 PSRR 低壓降 (LDO) 穩壓器 TPS7H1111-SEP 耐輻射、1.5-A、超低雜訊、超高 PSRR RF LDO 穩壓器 TPS7A90 高準確度 500mA 低雜訊高 PSRR 可調式超低壓降電壓穩壓器 TPS7A91 具高準確度的 1-A、低雜訊、高 PSRR、可調式超低壓降電壓穩壓器 TPS7A92 具高準確度的 2-A、低雜訊、高 PSRR、可調式超低壓降電壓穩壓器
硬體開發
開發板
TPS7A57EVM-081 適用於 5-A 低雜訊高準確度低壓差 (LDO) 電壓穩壓器的 TPS7A57 評估模組
參考設計

TIDA-01027 — 在 12.8 GSPS 資料採集系統中發揮最大效能的低雜訊電源供應參考設計

此參考設計展示了一款高效能、低雜訊的五軌電源設計,適用於超高速資料採集 (DAQ) 系統,支援超過 12.8 GSPS。電源供應 DC/DC 轉換器具備頻率同步與相位轉換功能,可將輸入電流漣波降至最低並控制頻率內容。採用高性能 HotRod™ 封裝技術,可將潛在的輻射電磁干擾 (EMI) 降至最低。
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01240 — 射頻取樣 S 波段雷達發送器參考設計

運用 DAC38RF80(一款 9GSPS 16 位元數位轉類比轉換器 (DAC))的射頻取樣架構,展示適合 S 頻帶多功能相位陣列雷達 (MPAR) 的波形合成。RF 取樣發射架構可簡化訊號鏈,讓資料轉換器更貼近天線,實現靈活性與高性能。
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01435 — 適用於微波回程連線的高頻寬、零中頻參考設計

TSW40RF82EVM 參考設計提供可介接 DAC38RF82 與高性能調變器 TRF370417EVM 的平台。TRF370417EVM 可在高達 6GHz 的情況下調變寬頻訊號,就像微波回程應用一樣。TRF370417 裝置可取代適當的較高頻率裝置。只需進行最小程度的修改即可將數位類比轉換器 (DAC) 與調製器連接。此設計提供 TSW40RF82EVM 與 TRF370417EVM 連接的方式。
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01232 — 高電流低雜訊並聯 LDO 參考設計

此並聯低壓差 (LDO) 參考設計展示 TPS7A85 低雜訊 LDO 線性穩壓器在並聯配置中的應用,可為每個 LDO 供應 3.5A 電流,或為每塊電路板供應 7A 電流。額外的設計彈性還包括將該設計堆疊以符合應用當前的需求。
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01084 — 連續波相位對齊多音調產生器:DC 轉 6GHz 射頻取樣 DAC 參考設計

TIDA-01084 參考設計展示了使用射頻取樣 DAC,產生連續相位對齊多音波形。14 位元的 9GSPS DAC38RF83 配備四個 48 位元獨立 NCO,可產生四個 CW 音調,放置在第一個奈奎斯特區內的任意位置,或在第二個奈奎斯特區內支援高達 6GHz。

此參考設計涵蓋操作理論、GUI 說明以及透過編程 NCO 產生音調而無需外部模式產生器的說明。此設計展示了一種易於使用的方法,該方法極大簡化並減少用於產生連續波形的物料清單 (BOM)。

Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGR) 20 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片