TPS7A4501-SP

現行

Radiation-hardened, QML-V, 1.5V to 20V input 1.5A low-dropout (LDO) regulator

產品詳細資料

Rating Space Vin (max) (V) 20 Vin (min) (V) 2.3 Iout (max) (A) 1.5 Output options Adjustable Output Vout (max) (V) 19.2 Vout (min) (V) 1.21 Noise (µVrms) 50 PSRR at 100 KHz (dB) 45 Iq (typ) (mA) 1 Features Enable Thermal resistance θJA (°C/W) 86 Load capacitance (min) (µF) 10 Regulated outputs (#) 1 Accuracy (%) 3 Dropout voltage (Vdo) (typ) (mV) 270 Operating temperature range (°C) -55 to 125 Radiation, SEL (MeV·cm2/mg) 86 Radiation, TID (typ) (krad) 100
Rating Space Vin (max) (V) 20 Vin (min) (V) 2.3 Iout (max) (A) 1.5 Output options Adjustable Output Vout (max) (V) 19.2 Vout (min) (V) 1.21 Noise (µVrms) 50 PSRR at 100 KHz (dB) 45 Iq (typ) (mA) 1 Features Enable Thermal resistance θJA (°C/W) 86 Load capacitance (min) (µF) 10 Regulated outputs (#) 1 Accuracy (%) 3 Dropout voltage (Vdo) (typ) (mV) 270 Operating temperature range (°C) -55 to 125 Radiation, SEL (MeV·cm2/mg) 86 Radiation, TID (typ) (krad) 100
CFP (HKU) 10 45.4896 mm² (— mm × — mm) DIESALE (KGD) See data sheet CFP (U) 10 139.36 mm² (21.44 mm × 6.5 mm)
  • QMLV Qualified SMD 5962-12224
  • Adjustable Output from 1.21 to 20 V
  • Optimized for Fast-Transient Response
  • High Output Voltage Accuracy: 1.15% at 25°C (Typical)
  • Dropout Voltage: 200 mV With ILOAD = 750 mA (Typical)
  • Low Noise: 50 µVRMS (10 Hz to 100 kHz) for VOUT = 5 V
  • High Ripple Rejection: 68 dB at 1 kHz
  • 1-mA Quiescent Current
  • No Protection Diodes Needed
  • Stable With Ceramic Output Capacitor
  • Reverse-Battery Protection
  • Reverse Current Protection
  • 5962-1222402VHA:
    • Wide Vin 2.3 to 20 V
    • Output Current: 750 mA
  • 5962R1222403VXC:
    • Wide Vin 2.9 to 20 V
    • Output Current: 1.5 A
    • Thermally-Enhanced HKU Package
    • Radiation Hardness Assurance (RHA) up to Total Ionizing Dose (TID) 100 krad (Si)
    • Exhibits Low Dose Rate Sensitivity But Remains Within the Pre-Radiation Electrical Limits at 100 krad Total Dose Level, as Allowed by MIL-STD-883, TM1019
  • QMLV Qualified SMD 5962-12224
  • Adjustable Output from 1.21 to 20 V
  • Optimized for Fast-Transient Response
  • High Output Voltage Accuracy: 1.15% at 25°C (Typical)
  • Dropout Voltage: 200 mV With ILOAD = 750 mA (Typical)
  • Low Noise: 50 µVRMS (10 Hz to 100 kHz) for VOUT = 5 V
  • High Ripple Rejection: 68 dB at 1 kHz
  • 1-mA Quiescent Current
  • No Protection Diodes Needed
  • Stable With Ceramic Output Capacitor
  • Reverse-Battery Protection
  • Reverse Current Protection
  • 5962-1222402VHA:
    • Wide Vin 2.3 to 20 V
    • Output Current: 750 mA
  • 5962R1222403VXC:
    • Wide Vin 2.9 to 20 V
    • Output Current: 1.5 A
    • Thermally-Enhanced HKU Package
    • Radiation Hardness Assurance (RHA) up to Total Ionizing Dose (TID) 100 krad (Si)
    • Exhibits Low Dose Rate Sensitivity But Remains Within the Pre-Radiation Electrical Limits at 100 krad Total Dose Level, as Allowed by MIL-STD-883, TM1019

The TPS7A4501-SP is a low-dropout (LDO) regulator optimized for fast-transient response. The 5962-1222402VHA can supply 750 mA of output current with a dropout voltage of 300 mV. The 5962R1222403VXC can supply 1.5 A of output current with a dropout voltage of 320 mV. Quiescent current is well controlled; it does not rise in dropout, as with many other regulators. In addition to fast transient response, the TPS7A4501-SP regulator has very-low output noise, which makes it ideal for sensitive RF supply applications.

Output voltage range is from 1.21 to 20 V. The TPS7A4501-SP is stable with output capacitance as low as 10 µF. Small ceramic capacitors can be used without the necessary addition of ESR, as is common with other regulators. Internal protection circuitry includes reverse-battery protection, current limiting, thermal limiting, and reverse-current protection. The device is available as an adjustable device with a 1.21-V reference voltage. The 5962-1222402VHA is available in 10-pin CFP (U) package and 5962R1222403VXC is available in thermally-enhanced 10-pin CFP (HKU) package. Known good die (KGD) option is available for both 5962-1222402V9A for non-RHA version and 5962R1222403V9A for RHA.

The TPS7A4501-SP is a low-dropout (LDO) regulator optimized for fast-transient response. The 5962-1222402VHA can supply 750 mA of output current with a dropout voltage of 300 mV. The 5962R1222403VXC can supply 1.5 A of output current with a dropout voltage of 320 mV. Quiescent current is well controlled; it does not rise in dropout, as with many other regulators. In addition to fast transient response, the TPS7A4501-SP regulator has very-low output noise, which makes it ideal for sensitive RF supply applications.

Output voltage range is from 1.21 to 20 V. The TPS7A4501-SP is stable with output capacitance as low as 10 µF. Small ceramic capacitors can be used without the necessary addition of ESR, as is common with other regulators. Internal protection circuitry includes reverse-battery protection, current limiting, thermal limiting, and reverse-current protection. The device is available as an adjustable device with a 1.21-V reference voltage. The 5962-1222402VHA is available in 10-pin CFP (U) package and 5962R1222403VXC is available in thermally-enhanced 10-pin CFP (HKU) package. Known good die (KGD) option is available for both 5962-1222402V9A for non-RHA version and 5962R1222403V9A for RHA.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
TPS7H1111-SP 現行 Radiation-hardened, QML-P and QML-V, 1.5A ultra-low-noise high-PSRR low-dropout (LDO) regulator Ceramic QMLV or plastic QMLP LDO with lower input and output voltage, lower noise and higher power-supply rejection
TPS7H1121-SP 現行 Radiation-hardened, QML-V, 2.25V to 14V input, 2A low-dropout (LDO) regulator QMLV version with higher current capability, more features and similar size ceramic package

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 28
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS7A4501-SP Low-Dropout Voltage Regulator datasheet (Rev. D) PDF | HTML 2015/8/11
* 輻射及可靠性報告 TPS7A4501-SP (5962-1222402VHA) Neutron Displacement Damage Characterization (Rev. A) 2021/6/15
* 輻射及可靠性報告 TPS7A4501-SP Single-Event Effects Test Report 2018/10/22
* 輻射及可靠性報告 TPS7A4501-SP Total Ionizing Dose Radiation Report (Rev. A) 2017/3/16
* SMD TPS7A4501-SP SMD 5962-12224 2021/4/12
白皮書 IC Sourcing for Space: Pros and Cons of Up-screening COTS Versus Space Enhanced Products (SEP) PDF | HTML 2026/7/28
應用說明 Highly Scalable Space Motor Control Platform based on TI’s Space Enhanced Products (-SEP) and Space Products PDF | HTML 2026/6/8
選擇指南 TI Space Products (Rev. L) 2026/3/27
應用說明 Hermetic Package Reflow Profiles, Termination Finishes, and Lead Trim and Form (Rev. A) PDF | HTML 2025/11/5
白皮書 Reduce System Noise Using Parallel LDOs PDF | HTML 2025/11/3
設計指南 Radiation-Hardened Space Battery Management System (BMS) Reference Design PDF | HTML 2025/7/30
Application brief DLA Approved Optimizations for QML Products (Rev. C) PDF | HTML 2025/6/17
應用說明 Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. B) PDF | HTML 2025/6/10
更多文件說明 TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. B) 2025/2/20
技術文章 Maximizing performance with clean and low-noise power using space-grade LDOs PDF | HTML 2024/1/5
應用說明 QML flow, its importance, and obtaining lot information (Rev. C) 2023/8/30
白皮書 Space Power Supply for the STAR-Tiger SpaceFibre Routing Switch PDF | HTML 2023/7/27
白皮書 Parallel LDO Architecture Design Using Ballast Resistors PDF | HTML 2022/12/14
白皮書 Comprehensive Analysis and Universal Equations for Parallel LDO's Using Ballast PDF | HTML 2022/12/13
應用說明 Single-Event Effects Confidence Interval Calculations (Rev. A) PDF | HTML 2022/10/19
Application brief Space-Grade, 100-krad, Voltage-Controlled Current Sink (0–200 mA) Circuit PDF | HTML 2021/6/30
Circuit design Space-Grade, 50-krad, 2-Wire, Discrete 4–20-mA Current Transmitter Circuit PDF | HTML 2021/5/27
技術文章 How to choose the right LDO for your satellite application PDF | HTML 2021/4/9
應用說明 DLA Standard Microcircuit Drawings (SMD) and JAN Part Numbers Primer 2020/8/21
技術文章 4 trends in space-grade power management PDF | HTML 2020/2/12
電子書 Radiation Handbook for Electronics (Rev. A) 2019/5/21
技術文章 When failure isn’t an option: power up your next satellite with integrated functio PDF | HTML 2019/4/30
應用說明 Use of an LDO as a Load Switch for Space Applications 2018/8/1

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ADC12DJ3200EVMCVAL — ADC12DJ3200QML-SP 評估模組

ADC12DJ3200 評估模組 (EVM) 專為評估 ADC12DJ3200QML-SP 高速類比轉數位轉換器 (ADC) 所設計。本 EVM 搭載 ADC12DJ3200QML-SP 晶片,該晶片為航太等級、具備 JESD204B 介面的 12 位元、雙通道 4GSPS 或單通道 8GSPS ADC。
使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

TPS7A4501EVM-CVAL — TPS7A4501-SP 寬輸入電壓評估模組 (EVM)

TPS7A4501 是針對快速暫態響應最佳化的低壓差 (LDO) 穩壓器。
其提供熱增強型小型解決方案,能夠提供 1.5A 負載電流,並具有適用於敏感 RF 應用的低輸出雜訊。

使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

TSW12D1620EVM-CVAL — ADC12D1620QML-SP 評估模組,適用 300-krad、12 位元、雙 1.6-GSPS 或單 3.2-GSPS ADC

TSW12D1620EVM-CVAL 是 1.5 GHz 寬頻接收器評估模組 (EVM) ,其中包括放大器、類比轉數位轉換器 (ADC) 、時脈、溫度感測器、微控制器和電源解決方案的陶瓷工程模型。此電路板最適合將近 DC 的 IF/RF 頻率數位化至 1.5 GHz。

類比輸入路徑可選擇將 6.5 GHz LMH5401-SP 做為單端至差動增益區塊,或繞過放大器並以差動訊號驅動 ADC。該放大器後接 12 位元、雙 1.6-GSPS 或單 3.2-GSPS ADC12D1620QML-SP。這些高效能元件皆有必要的電源、微控制器和溫度感測器裝置支援。

TSW12D1620EVM-CVAL (...)

使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TPS7A4501-SP PSpice Transient Model (Rev. A)

SLVMC22A.ZIP (16 KB) - PSpice 模型
支援產品和硬體
模擬型號

TPS7A4501-SP PSpice Worst-Case Analysis Model

SLVMDA5.ZIP (796 KB) - PSpice 模型
支援產品和硬體
計算工具

PARALLEL-LDO-CALC — Parallel low-dropout (LDO) calculator

並聯低壓差 (LDO) 計算器是以 Microsoft® Excel® 為基礎的工具,可為使用鎮流器電阻器的並聯 LDO 穩壓器提供最壞情況分析。此工具可幫助使用者判斷所需的並聯 LDO 穩壓器最小數量,以及適合系統要求集的最佳鎮流器電阻。

在並聯應用中使用的常用 LDO 穩壓器的產品規格書資訊會預先填入計算機中。使用者可根據自己的系統需求,評估最符合其系統需求的 LDO 穩壓器裝置。

支援產品和硬體
參考設計

TIDA-010191 — 航太級多通道 JESD204B 15-GHz 時脈參考設計

相位陣列天線和數位波束成形技術,是提高未來航太雷達成像和寬頻衛星通訊系統的性能的關鍵技術。數位波束成形與類比波束成形不同,通常每個天線元件需要一套資料轉換器。這些轉換器需要具有具體定義相位關係的時鐘。此參考設計展示如何透過已定義及可調整相位關係,產生低雜訊 MHz 至 GHz 時脈訊號。在發生單一事件後,甚至可能恢復時脈階段。透過操作兩個 ADC12DJ3200QML-SP 評估模組,及在 3.2 GHz 時其對應之 FPGA 架構擷取平台,以及 10-ps 板對板偏斜的情況,藉此來展示 JESD204B 支援。
支援產品和硬體
參考設計

TIDA-010931 — 抗輻射航太電池管理系統 (BMS) 參考設計

此參考設計展示航太級電池管理系統。電路可量測串聯的八顆電池芯,以監控電池健康狀態、充電狀態與溫度。
支援產品和硬體
參考設計

TIDA-060042 — 串聯電阻溫度偵測器 (RTD) 感測參考設計

TIDA-060042 參考設計展示了使用 ADS1282EVM-PDK 的完整航太級比率式溫度感測電路。此電路可在不使用緩衝器的情況下,測量多達 10 個不同位置的溫度。多數空間應用都需在多個子系統中進行溫度量測,因此可自此多位置電路得到幫助。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
CFP (HKU) 10 Ultra Librarian
DIESALE (KGD) Ultra Librarian
CFP (U) 10 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片系列

觀看所有影片

影片