首頁 電源管理 多通道 IC (PMIC)
首頁
電源管理
多通道 IC (PMIC)

TPS65222-Q1

現行

具有四個降壓轉換器和三個適用於最高 ASIL-B 之 ADAS 處理器的 LDO 的車用 5.5V PMIC

立即訂購
產品規格表

TPS65222-Q1

現行
產品規格表 立即訂購

產品詳細資料

Processor supplier Texas Instruments Processor name AM62A, AM62A-Q1, AM62D, AM62D-Q1, AM62P, AM62P-Q1 Regulated outputs (#) 7 Step-down DC/DC converter 4 LDO 3 Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (min) (V) 0.5 Vout (max) (V) 3.3 Iout (max) (A) 10 TI functional safety category Functional Safety-Compliant Features Adaptive/Dynamic Voltage Scaling, Dynamic voltage scaling, I2C control, Multiple outputs, Power Sequencing, Power good, Undervoltage and overvoltage monitor Rating Automotive Operating temperature range (°C) -40 to 125 Switching frequency (typ) (kHz) 2200, 4400 Processor series Sitara
Processor supplier Texas Instruments Processor name AM62A, AM62A-Q1, AM62D, AM62D-Q1, AM62P, AM62P-Q1 Regulated outputs (#) 7 Step-down DC/DC converter 4 LDO 3 Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (min) (V) 0.5 Vout (max) (V) 3.3 Iout (max) (A) 10 TI functional safety category Functional Safety-Compliant Features Adaptive/Dynamic Voltage Scaling, Dynamic voltage scaling, I2C control, Multiple outputs, Power Sequencing, Power good, Undervoltage and overvoltage monitor Rating Automotive Operating temperature range (°C) -40 to 125 Switching frequency (typ) (kHz) 2200, 4400 Processor series Sitara
VQFN-HR (RAH) 36 30 mm² 6 x 5
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Input supply: 3V to 5.5V
    • Temperature grade 1: –40°C to +125°C (ambient)
    • HBM classification level 2
    • CDM classification level C4A
  • Functional safety-compliant
    • Developed for functional safety applications
    • Documentation available to aid ISO26262 system design
    • Documentation available to aid IEC61508 system design
    • Systematic integrity up to ASIL-D
    • Systematic integrity up to SIL-3
    • Hardware integrity up to ASIL-B
    • Hardware integrity up to SIL-2
    • Undervoltage and overvoltage monitors and current limit on all output supply rails
    • Undervoltage and overvoltage monitors for two external supply rails and for input supply
    • Watchdog (trigger or Q&A)
    • Error signal monitor (level or PWM)
    • Temperature warning and thermal shutdown
    • Built-in self-test on voltage monitors
  • BUCK1 + BUCK2 high-efficiency step-down DC/DC converters
    • Output voltage: 0.5V to 3.3V (0.5V to 1.2V for dual-phase output)
    • Output current: 5.5A in single-phase, 10A in dual-phase
    • Switching frequency: 2.2MHz or 4.4MHz
  • BUCK3 + BUCK4 high-efficiency step-down DC/DC converters
    • Output voltage: 0.5V to 3.3V
    • Output current: 2.4A
    • Switching frequency: 2.2MHz or 4.4MHz
  • Two low-dropout (LDO) linear regulators with configurable load-switch mode
    • Output voltage: 0.6V to 3.3V in LDO-mode
    • Output current: 400mA
  • One low-dropout (LDO) linear regulator with low-noise performance and with configurable load-switch mode
    • Output voltage: 1.2V to 3.3V in LDO-mode
    • Output current: 300mA
  • Six configurable general-purpose input-output (GPIO) pins, reset and safe state outputs
  • OTP configurable power sequence
  • 36-pin, 5mm × 6mm, QFN package, 0.5mm pitch
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Input supply: 3V to 5.5V
    • Temperature grade 1: –40°C to +125°C (ambient)
    • HBM classification level 2
    • CDM classification level C4A
  • Functional safety-compliant
    • Developed for functional safety applications
    • Documentation available to aid ISO26262 system design
    • Documentation available to aid IEC61508 system design
    • Systematic integrity up to ASIL-D
    • Systematic integrity up to SIL-3
    • Hardware integrity up to ASIL-B
    • Hardware integrity up to SIL-2
    • Undervoltage and overvoltage monitors and current limit on all output supply rails
    • Undervoltage and overvoltage monitors for two external supply rails and for input supply
    • Watchdog (trigger or Q&A)
    • Error signal monitor (level or PWM)
    • Temperature warning and thermal shutdown
    • Built-in self-test on voltage monitors
  • BUCK1 + BUCK2 high-efficiency step-down DC/DC converters
    • Output voltage: 0.5V to 3.3V (0.5V to 1.2V for dual-phase output)
    • Output current: 5.5A in single-phase, 10A in dual-phase
    • Switching frequency: 2.2MHz or 4.4MHz
  • BUCK3 + BUCK4 high-efficiency step-down DC/DC converters
    • Output voltage: 0.5V to 3.3V
    • Output current: 2.4A
    • Switching frequency: 2.2MHz or 4.4MHz
  • Two low-dropout (LDO) linear regulators with configurable load-switch mode
    • Output voltage: 0.6V to 3.3V in LDO-mode
    • Output current: 400mA
  • One low-dropout (LDO) linear regulator with low-noise performance and with configurable load-switch mode
    • Output voltage: 1.2V to 3.3V in LDO-mode
    • Output current: 300mA
  • Six configurable general-purpose input-output (GPIO) pins, reset and safe state outputs
  • OTP configurable power sequence
  • 36-pin, 5mm × 6mm, QFN package, 0.5mm pitch

The TPS65222-Q1 device meets the power management requirements of the latest processors and platforms in various safety-relevant applications. The device is characterized across an ambient temperature range of -40°C to +125°C, making the PMIC an excellent choice for various automotive applications. The device has four step-down DC/DC (BUCK) converters, of which two can be used in a dual-phase configuration. Furthermore, the device has three low drop-out (LDO) regulators, which can also be used as load-switches.

The TPS65222-Q1 device meets the power management requirements of the latest processors and platforms in various safety-relevant applications. The device is characterized across an ambient temperature range of -40°C to +125°C, making the PMIC an excellent choice for various automotive applications. The device has four step-down DC/DC (BUCK) converters, of which two can be used in a dual-phase configuration. Furthermore, the device has three low drop-out (LDO) regulators, which can also be used as load-switches.

filter 尋找其它 多通道 IC (PMIC)
下載 觀看有字幕稿的影片 影片

索取更多資訊

提供完整的產品規格表。立即索取


提供安全資訊。立即索取

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
重要文件 類型 標題 格式選項 日期
* Data sheet TPS65222-Q1 Power Management IC (PMIC) with 4 BUCKs and 3 LDOs for Safety-Relevant Applications datasheet PDF | HTML 2025年 8月 13日
Application brief Power-Supply Design for Sitara AM62A/P/D(-Q1) using TPS6522430-Q1 and TPS6522230-Q1 PMICs PDF | HTML 2025年 7月 23日
Product overview PMIC for Powering AM62Px Devices PDF | HTML 2024年 3月 14日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS65224Q1EVM — TPS652241-Q1 評估模組

TPS65224Q1EVM 評估板可用於測試、示範、偵錯與配置用於汽車及工業應用的 TPS6522x 電源管理 IC。板載裝置為 TPS6522430-Q1，具備適用於降壓轉換器的 2+1+1 相位配置，並具有一個 10A 輸出及兩個 2A 輸出。
使用指南: PDF | HTML
TI.com 無法提供
驅動程式或資料庫

PMIC-RTOS-DRIVERS — RTOS and Bare-Metal Drivers for Texas Instruments Power Managment ICs

This low-level driver package enables users to dynamically configure hardware and safety mechanisms of Texas Instruments functional safety compliant PMICs and assists in achieving functional safety goals.
支援產品和硬體

支援產品和硬體
檢視 GitHub
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN-HR (RAH) 36 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片