TPS63900
- Input voltage range: 1.8 V to 5.5 V
- Output voltage range: 1.8 V to 5 V (100-mV steps)
- Programmable with external resistors
- SEL pin to toggle between two output voltage presets
- > 400-mA output current for VI ≥ 2.0 V, VO = 3.3 V
(typical 1.45-A peak switching current limit)
- Stackable: parallel multiple devices for higher output current
- > 90% Efficiency at 10-µA load current
- 75-nA quiescent current
- 60-nA shutdown current
- Single-mode operation
- Eliminates mode transitions between buck, buck-boost and boost operation
- Low output ripple
- Excellent transient performance
- Safety and robust operation features
- Integrated soft start
- Programmable input current limit with eight settings (1 mA to 100 mA and unlimited)
- Output short-circuit and overtemperature protection
- Tiny solution size of 21-mm2
- Small 2.2-µH inductor, single 22-µF output capacitor
- 10-Pin, 2.5-mm × 2.5-mm, 0.5-mm pitch WSON package
The TPS63900 device is a high-efficiency synchronous buck-boost converter with an extremely low quiescent current (75 nA typical). The device has 32 user-programmable output voltage settings from 1.8 V to 5 V.
A dynamic voltage-scaling feature lets applications switch between two output voltages during operation; for example, to save power by using a lower system supply voltage during standby operation.
With its wide supply voltage range and programmable input current limit (1 mA to 100 mA and unlimited), the device is ideal for use with a wide range of primary like 3S Alkaline, 1S Li-MnO2 or 1S Li-SOCl2, and secondary battery types.
The high-output current capability supports commonly-used RF standards like sub-1-GHz, BLE, LoRa, wM-Bus, and NB-IoT.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS63900EVM — 適用於低 Iq 降壓升壓轉換器的 TPS63900 評估模組
TPS63900EVM 的設計旨在幫助使用者輕鬆評估及測試 TPS63900 降壓升壓轉換器的運作及功能。EVM 的輸入電壓運作範圍為 1.8V 至 5.5V。在降壓模式及升壓模式中,輸出電流可高達 400mA。使用者可輕鬆評估 TPS63900 的不同功能,包括低 IQ 和編程介面。
TPS63900 為小型 2.5 x 2.5 mm² WSON 封裝。
SLVC808 — Battery Lifetime Estimator
TIDA-010029 — 具備 Bluetooth® 5 的穿戴式 16 相位多感測器 SpO2 與心率監測器 (HRM) 參考設計
此參考設計可實現可穿式且最佳化的周邊微血管含氧 (SpO2) 飽和度,以及多感測器,多波長光學心率監測器 (HRM)。此裝置使用 AFE4420 裝置,這是用於光體積變化描記圖 (PPG) 量測的單晶片,生物感測前端。支援多達四個切換發光二極體 (LED) 和多達四個光二極體,以實現多達 16 相位的訊號擷取。CC2640R2F 裝置(支援 Bluetooth® 低耗能 4.2 和 5)會將測量的資料傳輸至遠端位置。此病患監控設計採用單一 CR3032 電池,生命週期可達 30 天。原始數據可用於計算心率,SpO2 和其他相關參數。2 個板載發光二極體 (LED) 可識別電池電量不足偵測和 (...)
TIDA-010053 — 使用一次電池,且適用於智慧電表無線模組的低功耗選項參考設計
TIDA-010224 — 可延長電池壽命的低功耗無線攝影機參考設計
具有 Wi-Fi® 連接裝置的處理器可實現安全高品質即時視訊串流和雙向音訊串流,並具有降噪和迴聲消除功能。此設計包含紅外線 (IR) LED 與 IR Cut 濾波器,以提供夜視功能。
TIDA-01580 — 適用於醫療和消費者穿戴式裝置的無線 ECG、SpO2、PTT 和心率監測器參考設計
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WSON (DSK) | 10 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。