TPS63001
- Input Voltage Range: 1.8 V to 5.5 V
- Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
- Up to 96% Efficiency
- 1200-mA Output Current at 3.3 V in Step-Down Mode (VIN = 3.6 V to 5.5 V)
- Up to 800-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
- Automatic Transition Between Step-Down and Boost Mode
- Device Quiescent Current less than 50 μA
- Power-Save Mode for Improved Efficiency at Low Output Power
- Forced Fixed Frequency Operation and Synchronization Possible
- Load Disconnect During Shutdown
- Overtemperature Protection
- Available in a Small 3-mm × 3-mm 10-Pin VSON Package (QFN)
All trademarks are the property of their respective owners.
The TPS6300x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-ion or Li-polymer battery. Output currents can go as high as 1200 mA while using a single-cell Li-ion or Li-polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power-save mode to maintain high efficiency over a wide load current range. The power-save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1800 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery.
The TPS6300x devices operate over a free air temperature range of –40°C to 85°C. The devices are packaged in a 10-pin VSON package (QFN) measuring 3 mm × 3 mm (DRC).
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TPS6300x High-Efficient Single Inductor Buck-Boost Converter With 1.8-A Switches datasheet (Rev. C) | PDF | HTML | 2015/10/30 | ||
| 應用說明 | QFN and SON PCB Attachment (Rev. C) | PDF | HTML | 2023/12/6 | |||
| 應用說明 | Layer Design for Reducing Radiated EMI of DC to DC Buck-Boost Converters (Rev. A) | PDF | HTML | 2021/6/9 | |||
| 應用說明 | Performing Accurate PFM Mode Efficiency Measurements (Rev. A) | 2018/12/11 | ||||
| 應用說明 | Understanding Undervoltage Lockout in Power Devices (Rev. A) | 2018/9/19 | ||||
| 應用說明 | Basic Calculations of a 4 Switch Buck-Boost Power Stage (Rev. B) | 2018/7/9 | ||||
| 選擇指南 | Power Management Guide 2018 (Rev. R) | 2018/6/25 | ||||
| 類比設計期刊 | IQ: What it is, what it isn’t, and how to use it | 2011/6/17 | ||||
| 應用說明 | Minimizing Ringing at the Switch Node of a Boost Converter | 2006/9/15 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS63000EVM-148 — TPS63000 5.5V 輸入、3.3V 輸出、1A 降壓-升壓轉換器評估模組基板
Evaluation Module Board for Buck-Boost Converter 5.5V Input, 3.3V Output, 1A
The TPS63000EVM-148 is an evaluation tool for the TPS63000 device family. It is a 96% efficient Buck/Boost Converter with an input range of 1.8 V to 5.5 V, optimized to run from a single-cell Li-Ion battery (...)
SLVC808 — Battery Lifetime Estimator
TIDM-ORIENTATIONTRACKER — 低功耗方向追蹤器參考設計
此參考應用展示了如何結合超低功耗 MSP 微控制器、定點軟體數學程式庫與加速計，以實現低成本、超低功耗、簡易的方向追蹤解決方案。MSP MCU 會對加速計進行取樣並即時執行計算，以決定其方向並偵測何時處於自由落體狀態。透過利用 IQmathLib 最佳化定點軟體程式庫並排除陀螺儀，此設計可依靠電池電力長時間運作。此解決方案可用於監控傾斜、掉落或遭竊，從而實現許多資產監控應用。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VSON (DRC) | 10 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。