首頁 電源管理 AC/DC 和 DC/DC 轉換器 (整合式 FET)

TPS62913

現行

具有整合式鐵氧體磁珠濾波器補償的 17-VIN、3-A 低雜訊和低漣波降壓轉換器

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 17 Vin (min) (V) 3 Vout (max) (V) 5.5 Vout (min) (V) 0.8 Features Enable, Frequency synchronization, Low Noise, Output discharge, Overcurrent protection, Power good, Soft-start adjustable, Spread-Spectrum Clock (SSC) Generation, Synchronous rectification, UVLO Fixed Control mode current mode Switching frequency (min) (kHz) 900 Switching frequency (max) (kHz) 2400 Operating temperature range (°C) -40 to 150 Iq (typ) (µA) 5000 Duty cycle (max) (%) 100 Type Converter
Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 17 Vin (min) (V) 3 Vout (max) (V) 5.5 Vout (min) (V) 0.8 Features Enable, Frequency synchronization, Low Noise, Output discharge, Overcurrent protection, Power good, Soft-start adjustable, Spread-Spectrum Clock (SSC) Generation, Synchronous rectification, UVLO Fixed Control mode current mode Switching frequency (min) (kHz) 900 Switching frequency (max) (kHz) 2400 Operating temperature range (°C) -40 to 150 Iq (typ) (µA) 5000 Duty cycle (max) (%) 100 Type Converter
VQFN-HR (RPU) 10 4 mm² 2 x 2
  • Low output 1/f noise < 20 µVRMS(100 Hz to 100 kHz)
  • Low output voltage ripple < 10 µVRMS after ferrite bead
  • High PSRR of > 65 dB (up to 100 kHz)
  • 2.2-MHz or 1-MHz fixed frequency peak current mode control
  • Synchronizable with external clock (optional)
  • Integrated loop compensation supports ferrite bead for second stage L-C filter with 30-dB attenuation (optional)
  • Spread spectrum modulation (optional)
  • 3.0-V to 17-V input voltage range
  • 0.8-V to 5.5-V output voltage range
  • 57-mΩ/20-mΩ RDSon
  • Output voltage accuracy of ±1%
  • Precise enable input allows
    • User-defined undervoltage lockout
    • Exact sequencing
  • Adjustable soft start
  • Power-good output
  • Output discharge (optional)
  • –40°C to 150°C junction temperature range
  • 2.0-mm × 2.0-mm QFN with 0.5-mm pitch
  • Create a custom design using the TPS6291x with the WEBENCH Power Designer
  • Low output 1/f noise < 20 µVRMS(100 Hz to 100 kHz)
  • Low output voltage ripple < 10 µVRMS after ferrite bead
  • High PSRR of > 65 dB (up to 100 kHz)
  • 2.2-MHz or 1-MHz fixed frequency peak current mode control
  • Synchronizable with external clock (optional)
  • Integrated loop compensation supports ferrite bead for second stage L-C filter with 30-dB attenuation (optional)
  • Spread spectrum modulation (optional)
  • 3.0-V to 17-V input voltage range
  • 0.8-V to 5.5-V output voltage range
  • 57-mΩ/20-mΩ RDSon
  • Output voltage accuracy of ±1%
  • Precise enable input allows
    • User-defined undervoltage lockout
    • Exact sequencing
  • Adjustable soft start
  • Power-good output
  • Output discharge (optional)
  • –40°C to 150°C junction temperature range
  • 2.0-mm × 2.0-mm QFN with 0.5-mm pitch
  • Create a custom design using the TPS6291x with the WEBENCH Power Designer

The TPS6291x devices are a family of high-efficiency, low noise and low ripple current mode synchronous buck converters. The devices are ideal for noise sensitive applications that would normally use an LDO for post regulation such as high-speed ADCs, clock and jitter cleaner, serializer, de-serializer, and radar applications.

The devices operate at a fixed switching frequency of 2.2 MHz or 1 MHz, and can be synchronized to an external clock.

To further reduce the output voltage ripple, the device integrates loop compensation to operate with an optional second-stage ferrite bead L-C filter. This allows an output voltage ripple below 10 µVRMS.

Low-frequency noise levels, similar to a low-noise LDO, are achieved by filtering the internal voltage reference with a capacitor connected to the NR/SS pin.

The optional spread spectrum modulation scheme spreads the DC/DC switching frequency over a wider span, which lowers the mixing spurs.

The TPS6291x devices are a family of high-efficiency, low noise and low ripple current mode synchronous buck converters. The devices are ideal for noise sensitive applications that would normally use an LDO for post regulation such as high-speed ADCs, clock and jitter cleaner, serializer, de-serializer, and radar applications.

The devices operate at a fixed switching frequency of 2.2 MHz or 1 MHz, and can be synchronized to an external clock.

To further reduce the output voltage ripple, the device integrates loop compensation to operate with an optional second-stage ferrite bead L-C filter. This allows an output voltage ripple below 10 µVRMS.

Low-frequency noise levels, similar to a low-noise LDO, are achieved by filtering the internal voltage reference with a capacitor connected to the NR/SS pin.

The optional spread spectrum modulation scheme spreads the DC/DC switching frequency over a wider span, which lowers the mixing spurs.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的裝置不同
TPS62912 現行 具有整合式鐵氧體磁珠濾波器補償的 17-VIN、2-A 低雜訊和低漣波降壓轉換器 2-A pin-to-pin compatible product offering lower current.
TPSM82913 現行 具有整合式鐵氧體磁珠濾波器補償的 17-V VIN、3-A 低雜訊和低漣波降壓模組 Module version with integrated inductor for ease of design
功能與所比較的裝置相似
TPS62916 現行 具有整合式鐵氧體磁珠濾波器補償的17-VIN、6-A 低雜訊低漣波降壓轉換器 Higher current (6A) version

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 19
類型 標題 日期
* Data sheet TPS6291x 3-V to 17-V, 2-A/3-A Low Noise and Low Ripple Buck Converter with Integrated Ferrite Bead Filter Compensation datasheet (Rev. B) PDF | HTML 2021年 3月 23日
More literature Low-Noise and Low-Ripple Techniques for a Supply Without an LDO (Rev. C) PDF | HTML 2025年 2月 19日
White paper 以低雜訊電源裝置簡化電源架構 (Rev. A) PDF | HTML 2024年 11月 19日
E-book Power Topologies Handbook (Rev. A) 2024年 10月 7日
Technical article 如何以低雜訊和低漣波設計技術強化電源與訊號完整性 PDF | HTML 2024年 10月 4日
Application brief Solving power design challenges in oscilloscope applications PDF | HTML 2023年 10月 31日
Application note Powering Noise Sensitive LIDAR ADC Designs With TPS62913 Buck Converter PDF | HTML 2022年 2月 28日
Design guide Multichannel RF Transceiver Low-Noise Clocking Ref. Des. for Radar and EW Applic PDF | HTML 2021年 12月 16日
Application note Powering the AFE7920 with the TPS62913 Low-Ripple and Low-Noise Buck Converter (Rev. A) PDF | HTML 2021年 12月 13日
More literature Low-noise and low-ripple techniques for a supply without an LDO PPT 2021年 12月 2日
Application note Demystifying and Mitigating Power Supply Ripple and Noise Implication on AFE8092 (Rev. B) PDF | HTML 2021年 11月 16日
Application brief Multi-Function Pins for Easy Designing PDF | HTML 2021年 7月 7日
Analog Design Journal Clutter‐free power supplies for RF converters in radar applications (Part 1)  2021年 3月 18日
Technical article Powering medical imaging applications with DC/DC buck converters PDF | HTML 2020年 11月 24日
Technical article Minimize noise and ripple with a low-noise buck converter PDF | HTML 2020年 10月 21日
Application note Powering Sensitive Noise ADC Designs with the TPS62913 Low-Noise Buck Converter PDF | HTML 2020年 9月 30日
Certificate TPS62913EVM-077 EU Declaration of Conformity (DoC) 2020年 7月 20日
Technical article Understanding and managing buck regulator output ripple PDF | HTML 2020年 6月 18日
Application note Output Ripple Voltage for Buck Switching Regulator (Rev. A) 2014年 10月 13日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LMK5B33414EVM — 適用於 14 輸出、三個 DPLL 和 APLL、具有 BAW VCO 的網路同步器的 LMK5B33414 評估模組

LMK5B33414 評估模組 (EVM) 是用於裝置評估、合規測試和系統原型設計的平台,適用於 LMK5B33414 網路時鐘產生器和同步器。

LMK5B33414 整合了三個類比相位鎖定迴路 (APLL) 和三個數位 PLL (DPLL) 與可編程迴路頻寬。EVM 包括超微型 A 版 (SMA) 連接器,用於時鐘輸入、振盪器輸入和時鐘輸出,以便與 50Ω 測試設備介接。板載溫度補償晶體振盪器 (TCXO) 可用來對 LMK5B33414 操作時的自由運轉、鎖定或維持模式進行評估。

LMK5B33414EVM 可透過板載 USB 微控制器 (MCU) 介面,使用配備 TI 時鐘與合成器 (...)

使用指南: PDF | HTML
TI.com 無法提供
開發板

LP-AM263 — AM263x Arm® 架構 MCU 通用型 LaunchPad™ 開發套件

LP-AM263 是一款針對 AM263x 系列 Arm® 架構應用型 MCU 打造的高效能開發板。此電路板極適用於初始評估與原型,因為它提供標準化且使用方便的平台,可用於開發您的下一個應用程式。

 

LP-AM263 配備 AM2634 MCU (採用 Arm® 架構) 及其他元件,讓使用者可透過多種裝置介面 (包括工業乙太網路 (IE)、標準乙太網路、快速序列介面 (FSI) 等) 輕鬆打造原型。AM2634 支援各種 IE 協定如 EtherCAT、EtherNet/IP 和 PROFINET®。

 

這款延伸 LaunchPad™ XL 開發套件提供額外的 I/O (...)

使用指南: PDF | HTML
TI.com 無法提供
開發板

LP-AM263P — AM263Px Arm® 架構 MCU 通用型 LaunchPad™ 開發套件

LP-AM263P 為 AM263Px 系列的 Sitara™ 高性能微控制器 (MCU) 的成本最佳化開發電路板。此電路板為初始評估與原型而設計,因為它提供標準化且使用方便的平台,可用於開發您的下一個應用程式。

LP-AM263P 配備了 Sitara AM263P4 處理器及其他零組件,可讓您使用各種裝置介面,其中包括工業乙太網路 (IE)、標準乙太網路、快速序列介面 (FSI) 及其他功能,來輕鬆建立原型。AM263P4 支援各種 IE 協定如 EtherCAT、EtherNet/IP 和 PROFINET®。

延伸 LaunchPad™ XL 開發套件提供額外的 I/O (...)

使用指南: PDF | HTML
TI.com 無法提供
開發板

TPS62913-IBB-EVM — TPS62913 評估模組 17-V、低雜訊、低漣波、反相降壓-升壓配置轉換器

TPS62913-IBB-EVM (BSR161A) 評估模組 (EVM) 有助於評估 TPS62912 2A 和 TPS62913 3A 針腳對針腳相容的低雜訊 (<20μVRMS) 和低漣波 (<10 μVRMS) 降壓轉換器,於反相降壓-升壓 (IBB) 拓樸時,採用小型 2mm x 2mm QFN 封裝。TPS62913 IBB-EVM 使用 3-A TPS62913,從 3 V 與 11.5 V 之間的輸入電壓輸出 -5-V 輸出電壓。由於雜訊極低,TPS6291x 是對雜訊敏感電路中的低壓降 (LDO) (...)
使用指南: PDF | HTML
TI.com 無法提供
開發板

TPS62913EVM-077 — 具有整合式鐵氧體磁珠濾波器補償的 17-V、3-A 低雜訊/低漣波降壓轉換器 EVM

TPS62913EVM-077 (BSR077-003) 評估模組 (EVM) 有助於評估採用 2 mm x 2 mm QFN 小型封裝,具有整合式鐵氧體磁珠濾波器補償的 TPS62913 3-A 低雜訊和低漣波降壓轉換器。EVM 使用 3 V 至 17 V 之間的輸入電壓輸出 1.2-V 輸出電壓。由於雜訊極低,TPS62913 是對雜訊敏感電路中的低壓降 (LDO) 線性穩壓器的高效率替代方案,如資料轉換器、時鐘、以及電信基礎架構、醫療、測試與量測以及航太與國防應用中的放大器。
使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPS62913 PSpice Transient Model (Rev. B)

SLVMDF8B.ZIP (363 KB) - PSpice Model
模擬型號

TPS62913 SIMPLIS Transient and Average Model (Rev. C)

SLVMDI9C.ZIP (1099 KB) - SIMPLIS Model
Gerber 檔案

BSR077B Gerbers

SLVC818.ZIP (509 KB)
參考設計

TIDA-010230 — 適用雷達和 EW 應用的多通道射頻收發器、低雜訊時脈參考設計

在現代雷達和電子作戰 (EW) 系統中,有源電子掃描陣列 (AESA) 天線系統通常會搭配高速多通道 RF 收發器使用。這些系統需要能進行精確通道間偏斜調整的超低雜訊時脈,以獲得最佳系統性能,例如訊噪比 (SNR)、無雜散動態範圍 (SFDR)、IMD3 和有效位元數 (ENOB)。此參考設計展示了 LMX2820 和 LMK04832 架構的低雜訊 JESD204B 相容時脈,可為多個 AFE7950 提供最高 X 頻段的操作的並同步成 < 10 ps,此外可於 9-GSPS/3-GSPS DAC/ADC 時脈提高系統性能。
Design guide: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN-HR (RPU) 10 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片