TPS62173
- DCS-Control™ Topology
- Input Voltage Range from 3 V to 17 V
- Up to 500-mA Output Current
- Adjustable Output Voltage from 0.9 V to 6 V
- Fixed Output Voltage Versions
- Seamless Power Save Mode Transition
- Typically 17-µA Quiescent Current
- Power Good Output
- 100% Duty Cycle Mode
- Short Circuit Protection
- Over Temperature Protection
- Pin to Pin Compatible with TPS62160 and TPS62125
- Available in a 2-mm × 2-mm 8-Pin WSON Package
- Create a Custom Design using the TPS62170 with the WEBENCH® Power Designer
The TPS6217x device family are easy to use synchronous step-down DC-DC converters optimized for applications with high power density. A high switching frequency of typically 2.25 MHz allows the use of small inductors and provides fast transient response as well as high output voltage accuracy by utilization of the DCS-Control™ topology.
With its wide operating input voltage range of 3 V to 17 V, the devices are ideally suited for systems powered from either a Li-Ion or other battery as well as from 12-V intermediate power rails. It supports up to 0.5-A continuous output current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode).
Power sequencing is also possible by configuring the enable and open-drain power good pins.
In power save mode, the devices show quiescent current of about 17 µA from VIN. Power save mode, entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In shutdown mode, the device is turned off and shutdown current consumption is less than 2 µA.
The device, available in adjustable and fixed output voltage versions, is packaged in a 2-mm × 2-mm 8-pin WSON package (DSG).
技術文件
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS62170EVM-627 — 採用 2x2-mm、8 針腳 WSON 封裝且適用於 TPS62170 (0.5-A、同步、降壓轉換器) 的評估模組
The TPS62170EVM-627 (HPA627-002) uses the TPS62170 adjustable version and is set to a 3.3-Voutput. The EVM operates with full-rated performance with an input voltage between 3.7 V and 17 V. The TPS62170 is a 0.5-A, synchronous, step-down converter in a 2x2-mm, 8-pin WSON package. Both fixed and (...)
AUDK2G — 66AK2Gx (K2G) 音訊子卡
K2G 音訊子卡是為了與 K2G 通用 EVM (EVMK2G) 或 EVMK2GX 配合使用而設計的，音訊子卡的操作需要 EVMK2G 或 EVMK2GX。 此子卡可讓使用者開發多聲道音訊應用，例如以 66AKG2G02 DSP + Arm® 處理器 SoC 為基礎的 A/V 接收器、音響、汽車擴大器系統和混音控制台。
PMP22165 — 適用於 Xilinx Versal 適應性計算加速平台 (ACAP) 參考設計的電源
PMP30528 — 適用於電表的超級電容器備用電源供應參考設計
TIDA-050020 — 適用於 Xilinx® Virtex Ultrascale+™ FPGA 的 PMBus™ 電壓穩壓器參考設計
此參考設計採用 TPS53681 多相控制器與 CSD95490Q5MC 智慧型功率級，實現高效能電源設計，適用於 Xilinx™ Ultrascale+™ FPGA 的 0.85V、200A VCCINT 電源軌。控制器的二次輸出可用於為 FPGA 的輔助電源軌供電。智慧功率級及整合式 PMBus™ 可輕鬆設定輸出電壓，並遙測主要設計參數。
此設計可實現電源供應的配置、VID 調整及補償調整，同時提供輸入與輸出電壓、電流、電源及溫度監控。TI 的 Fusion Digital Power™ Designer 適用於系統的編程、監控、驗證和特性分析。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WSON (DSG) | 8 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。