首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 切換穩壓器
DC/DC 轉換器

TPS62162-Q1

現行

採用 2x2SON 的 3V-17V 1A 車用降壓轉換器

立即訂購
產品規格表

TPS62162-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Topology Buck Iout (max) (A) 1 Vin (max) (V) 17 Vin (min) (V) 3 Vout (max) (V) 3.3 Vout (min) (V) 3.3 Features Enable, Light-load efficiency, Output discharge, Power good, Synchronous rectification, Tracking, Voltage Margining Control mode Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000017 Duty cycle (max) (%) 100 TI functional safety category Functional Safety-Capable
Rating Automotive Topology Buck Iout (max) (A) 1 Vin (max) (V) 17 Vin (min) (V) 3 Vout (max) (V) 3.3 Vout (min) (V) 3.3 Features Enable, Light-load efficiency, Output discharge, Power good, Synchronous rectification, Tracking, Voltage Margining Control mode Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000017 Duty cycle (max) (%) 100 TI functional safety category Functional Safety-Capable
WSON (DSG) 8 4 mm² (2 mm × 2 mm)
  • DCS-Control™ topology
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade: –40°C to 125°C operating junction temperature range
    • Device HBM ESD classification level H2
    • Device CDM ESD classification level C4B
  • Functional Safety-Capable
    • Documentation available to aid functional safety system design
  • Input voltage range: 3 V to 17 V
  • Up to 1-A output current
  • Adjustable output voltage from 0.9 V to 6 V
  • Fixed output voltage versions
  • Seamless power save mode transition
  • Typically 17-µA quiescent current
  • Power-good output
  • 100% Duty cycle mode
  • Short circuit protection
  • Overtemperature protection
  • Pin-to-pin compatible with TPS62170-Q1
  • Available in a 2-mm × 2-mm WSON-8 package
  • DCS-Control™ topology
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade: –40°C to 125°C operating junction temperature range
    • Device HBM ESD classification level H2
    • Device CDM ESD classification level C4B
  • Functional Safety-Capable
    • Documentation available to aid functional safety system design
  • Input voltage range: 3 V to 17 V
  • Up to 1-A output current
  • Adjustable output voltage from 0.9 V to 6 V
  • Fixed output voltage versions
  • Seamless power save mode transition
  • Typically 17-µA quiescent current
  • Power-good output
  • 100% Duty cycle mode
  • Short circuit protection
  • Overtemperature protection
  • Pin-to-pin compatible with TPS62170-Q1
  • Available in a 2-mm × 2-mm WSON-8 package

The TPS6216x-Q1 are easy to use synchronous step down DC-DC converters optimized for applications with high power density. A high switching frequency of typically 2.25 MHz allows the use of small inductors and provides fast transient response as well as high output voltage accuracy by using the DCS-Control™ topology.

With their wide operating input voltage range of 3 V to 17 V, the devices are ideally suited for systems powered from either a Li-Ion or other battery as well as from 12-V intermediate power rails. It supports up to 1-A continuous output current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode).

Power sequencing is also possible by configuring the Enable and open-drain Power Good pins.

In Power Save Mode, the devices draw quiescent current of about 17 µA from VIN. Power Save Mode, entered automatically and seamlessly if load is small, maintains high efficiency over the entire load range. In Shutdown Mode, the device is turned off and shutdown current consumption is less than 2 µA.

The devices are available in adjustable and fixed output voltage versions and are packaged in an 8-pin WSON package measuring 2 × 2 mm (DSG).

The TPS6216x-Q1 are easy to use synchronous step down DC-DC converters optimized for applications with high power density. A high switching frequency of typically 2.25 MHz allows the use of small inductors and provides fast transient response as well as high output voltage accuracy by using the DCS-Control™ topology.

With their wide operating input voltage range of 3 V to 17 V, the devices are ideally suited for systems powered from either a Li-Ion or other battery as well as from 12-V intermediate power rails. It supports up to 1-A continuous output current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode).

Power sequencing is also possible by configuring the Enable and open-drain Power Good pins.

In Power Save Mode, the devices draw quiescent current of about 17 µA from VIN. Power Save Mode, entered automatically and seamlessly if load is small, maintains high efficiency over the entire load range. In Shutdown Mode, the device is turned off and shutdown current consumption is less than 2 µA.

The devices are available in adjustable and fixed output voltage versions and are packaged in an 8-pin WSON package measuring 2 × 2 mm (DSG).
filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
TPS62172-Q1 現行 採用 2x2 QFN 封裝的 3-17V 0.5A 車用降壓轉換器 Pin-to-pin 500-mA product with the same fixed VOUT.
TPS62160-Q1 現行 採用 2x2SON 的 3V-17V 1A 車用降壓轉換器 Same product with an adjustable-output voltage.

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 3-V to 17-V 1-A Step-Down Converter with DCS-Control datasheet (Rev. B) 2020/5/26
功能安全資訊 TPS6216x-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. A) PDF | HTML 2020/11/20
類比設計期刊 Understanding 100% mode in low-power DC/DC converters 2018/6/22
類比設計期刊 Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 2017/10/24
類比設計期刊 Testing tips for applying external power to supply outputs without an input voltage 2016/10/24

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS62160EVM-627 — 採用 2x2-mm、8 針腳 WSON 封裝且適用於 TPS62160 (1-A、同步、降壓轉換器) 的評估模組

The TPS62160EVM-627 (HPA627-001) uses the TPS62160 adjustable version and is set to a 3.3-Voutput. The EVM operates with full-rated performance with an input voltage between 3.7 V and 17 V. The TPS62160 is a 1-A, synchronous, step-down converter in a 2x2-mm, 8-pin WSON package. Both fixed and (...)

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
參考設計

TIDA-01323 — 具有四路 4-Gbps FPD-Link III、雙 CSI -2 輸出和 PoC 的 ADAS 多感測器集線器參考設計

TIDA-01323 攝影機集線器參考設計允許透過同軸纜線連接最多四台 2 百萬像素、60fps 的攝影機。此設計運用這些同軸纜線為感測器提供電源、後通道通訊及時鐘同步。4Gbps FPD-Link III 四路解串器可透過 Samtec 連接器，支援行動工業處理器介面 (MIPI) 攝影機序列介面-2 (CSI-2) 的雙輸出至應用處理器。此設計也允許使用者連接其他類型的感測器，以進行感測器融合應用。
支援產品和硬體
參考設計

TIDA-020000 — 配備 POL PMIC、FPD-Link III、監控器和 POC 的車用 2.6-MP 攝影機模組參考設計

此參考設計結合 2.6 百萬像素的成像元件與 4 Gbps 串聯器，同時以超精巧體積為兩部裝置提供電源供應和電壓監控，以滿足汽車系統中小型攝影機的需求。此項設計包括高速序列介面，可將遠端車用攝影機模組連接至顯示器或機器視覺處理系統，並由同軸電纜同時傳送資料及電源。此參考設計中使用德州儀器的 4Gbps FPD-Link III SerDes 技術可利用單一纜線，傳輸未壓縮的 2.6MP 影片資料、雙向控制訊號及同軸纜線供電 (POC)。
支援產品和硬體
參考設計

TIDA-020002 — 採用 MIPI CSI-2 視訊介面、FPD-Link III 和 POC 技術的車用 2-MP 攝影機模組參考設計

本攝影機模組參考設計結合 2 百萬像素成像元件和 4Gbps 串聯器，以滿足車用系統中小型攝影機的需求。此外，這款設計也以超小型體積為兩部裝置提供電源供應和電壓監控。此項設計包括高速序列介面，可將遠端車用攝影機模組連接至顯示器或機器視覺處理系統，並由同軸電纜同時傳送資料及電源。此參考設計中使用的 4Gbps FPD-Link III SerDes 技術可利用單一纜線，傳輸未壓縮的 2MP 影片資料、雙向控制訊號及同軸纜線供電 (POC)。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WSON (DSG) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片系列

觀看所有影片

影片