首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 切換穩壓器
DC/DC 轉換器

TPS62143

現行

以 3x3 QFN 封裝呈現的 3–17V 2A 降壓轉換器

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相似於所比較的產品。
TPS62902 現行 採用 1.5-mm x 2-mm QFN 封裝的 3-V 至 17-V 輸入、2-A 高效低 IQ 降壓轉換器 Improved efficiency, smaller size and lower IQ.

TPS62143

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 2 Vin (max) (V) 17 Vin (min) (V) 3 Vout (max) (V) 5 Vout (min) (V) 5 Features Enable, Light Load Efficiency, Output discharge, Power good, Synchronous Rectification, Tracking, Voltage Margining Control mode Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000017 Duty cycle (max) (%) 100
Rating Catalog Topology Buck Iout (max) (A) 2 Vin (max) (V) 17 Vin (min) (V) 3 Vout (max) (V) 5 Vout (min) (V) 5 Features Enable, Light Load Efficiency, Output discharge, Power good, Synchronous Rectification, Tracking, Voltage Margining Control mode Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000017 Duty cycle (max) (%) 100
VQFN (RGT) 16 9 mm² (3 mm × 3 mm)
  • DCS-Control™ topology
  • Input voltage range: 3 V to 17 V
  • Up to 2-A output current
  • Adjustable output voltage from 0.9 V to 6 V
  • Pin-selectable output voltage (nominal, +5%)
  • Programmable soft start and tracking
  • Seamless power-save mode transition
  • Quiescent current of 17 µA (typical)
  • Selectable operating frequency
  • Power-good output
  • 100% duty-cycle mode
  • Short-circuit protection
  • Overtemperature protection
  • Pin-to-pin compatible with the TPS62130 and TPS62150
  • Available in a 3-mm × 3-mm, VQFN-16 package
  • Use the TPS82140 for faster designs
  • DCS-Control™ topology
  • Input voltage range: 3 V to 17 V
  • Up to 2-A output current
  • Adjustable output voltage from 0.9 V to 6 V
  • Pin-selectable output voltage (nominal, +5%)
  • Programmable soft start and tracking
  • Seamless power-save mode transition
  • Quiescent current of 17 µA (typical)
  • Selectable operating frequency
  • Power-good output
  • 100% duty-cycle mode
  • Short-circuit protection
  • Overtemperature protection
  • Pin-to-pin compatible with the TPS62130 and TPS62150
  • Available in a 3-mm × 3-mm, VQFN-16 package
  • Use the TPS82140 for faster designs

The TPS6214x family is an easy-to-use synchronous step-down DC-DC converter optimized for applications with high power density. A high switching frequency of typically 2.5 MHz allows the use of small inductors and provides fast transient response by use of the DCS-Control topology.

With their wide operating input voltage range of 3 V to 17 V, the devices are ideally suited for systems powered from either a Li-Ion or other batteries, as well as from 12-V intermediate power rails. It supports up to 2 A of continuous output current at output voltages between 0.9 V and 6 V (with 100% duty-cycle mode). The output voltage start-up ramp is controlled by the soft-start pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the Enable (EN) and open-drain Power Good (PG) pins.

In power save mode, the devices draw quiescent current of about 17 µA from VIN. Power Save Mode, entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In Shutdown Mode, the device is turned off and current consumption is less than 2 µA.

The device, available in adjustable and fixed output voltage versions, is packaged in a 16-pin VQFN package measuring 3 mm × 3 mm (RGT).

The TPS6214x family is an easy-to-use synchronous step-down DC-DC converter optimized for applications with high power density. A high switching frequency of typically 2.5 MHz allows the use of small inductors and provides fast transient response by use of the DCS-Control topology.

With their wide operating input voltage range of 3 V to 17 V, the devices are ideally suited for systems powered from either a Li-Ion or other batteries, as well as from 12-V intermediate power rails. It supports up to 2 A of continuous output current at output voltages between 0.9 V and 6 V (with 100% duty-cycle mode). The output voltage start-up ramp is controlled by the soft-start pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the Enable (EN) and open-drain Power Good (PG) pins.

In power save mode, the devices draw quiescent current of about 17 µA from VIN. Power Save Mode, entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In Shutdown Mode, the device is turned off and current consumption is less than 2 µA.

The device, available in adjustable and fixed output voltage versions, is packaged in a 16-pin VQFN package measuring 3 mm × 3 mm (RGT).
filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
TPS62153 現行 以 3x3 QFN 封裝呈現的 3–17V 1A 降壓轉換器 A pin-to-pin 1-A product with the same fixed-output voltage.
TPS62133 現行 採用 3x3 QFN 封裝的 3-17V 3A 降壓轉換器 A pin-to-pin 3-A product with the same fixed-output voltage.
功能相同，但針腳輸出與所比較的裝置不同。
TPS62147 現行 採用 2x3QFN 封裝且具 1% 精確度和 PFM/強制 PWM 的 3-17V 2.0A 降壓轉換器 Forced PWM in a smaller package.
功能相似於所比較的產品。
TPS82140 現行 具整合式電感器的 17V 輸入 2A 同步降壓轉換器 MicroSiP™ 模組 Power module version.

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 21
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS6214x 3-V to 17-V 2-A Step-Down Converter in 3 × 3 QFN Package datasheet (Rev. F) PDF | HTML 2021/10/21
應用說明 QFN and SON PCB Attachment (Rev. C) PDF | HTML 2023/12/6
應用說明 Using the TPS6215x in an Inverting Buck-Boost Topology.. (Rev. D) PDF | HTML 2023/1/23
應用說明 Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B) PDF | HTML 2022/5/23
應用說明 Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 2018/12/11
類比設計期刊 Understanding 100% mode in low-power DC/DC converters 2018/6/22
類比設計期刊 Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 2017/10/24
應用說明 Sequencing and Tracking With the TPS621-Family and TPS821-Family (Rev. A) 2017/6/28
類比設計期刊 Testing tips for applying external power to supply outputs without an input voltage 2016/10/24
類比設計期刊 Understanding frequency variation in the DCS-Control(TM) topology 2015/10/30
應用說明 Basic Calculation of a Buck Converter's Power Stage (Rev. B) PDF | HTML 2015/8/17
應用說明 Optimizing the TPS62130/40/50/60 Output Filter (Rev. A) 2015/7/15
類比設計期刊 Five steps to a great PCB layout for a step-down converter 2015/1/29
應用說明 Step-Down Converter With Input Overvoltage Protection 2014/9/4
應用說明 Step-Down Converter with Cable Voltage Drop Compensation 2014/6/26
類比設計期刊 High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions 2013/7/25
應用說明 How to Measure the Control Loop of DCS-Control Devices (Rev. A) 2012/8/9
應用說明 Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) 2012/1/13
應用說明 Powering the MSP430 from a High Voltage Input using the TPS62122 (Rev. C) 2012/1/12
應用說明 Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs 2011/9/19
類比設計期刊 IQ: What it is, what it isn’t, and how to use it 2011/6/17

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS62140EVM-505 — 採用 3x3 mm、16 針腳 QFN 的 TPS62140 2-A、同步降壓轉換器的評估模組

  • Related Terms:
    • Synchronous Step Down DC-DC Converter
    • DC to DC Step Down Converter
    • Buck DC DC Converter

The TPS62140EVM-505 (HPA505-002) uses the TPS62140 adjustable version and is set to a 3.3-Voutput. The EVM operates with full-rated performance with an input voltage between 3.7 V and 17 V. (...)

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TPS62143 PSpice Unencrypted Transient Model (Rev. B)

SLVM443B.ZIP (34 KB) - PSpice 模型
支援產品和硬體
模擬型號

TPS62143 TINA-TI Transient Reference Design

SLVMA41.ZIP (44 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

TPS62143 TINA-TI Transient Spice Model

SLVMA40.ZIP (53 KB) - TINA-TI Spice 模型
支援產品和硬體
參考設計

TIDA-00638 — 具有主動米勒鉗位且適用於太陽能逆變器的隔離式閘極驅動器功率級參考設計

此參考設計包含一個單一模組，配備強化隔離式 IGBT 閘極驅動器與專用的閘極驅動電源供應器。這項精巧的參考設計可控制太陽能逆變器中的 IGBT。  此設計採用強化隔離式 IGBT 閘極驅動器，內建 IGBT DESAT 偵測與米勒箝位保護，能夠使用單極供應電壓來驅動閘極。每個閘極驅動器所使用的開迴路推拉式拓撲架構電源供應器皆可為 PCB 佈線提供更大的彈性。本設計所採用的推拉式變壓驅動器運作頻率為 420kHz，有助於縮小隔離變壓器的體積，打造小巧的電源供應器。模組的針腳配置與我們的太陽能逆變器平台相容，可用於測試，也可作為獨立驅動器使用。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGT) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片